Design of fault tolerant flight control system

Kiyak Emre*, Fikret Çalişkan

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Dergiye katkıMakalebilirkişi

1 Atıf (Scopus)

Özet

The purpose of the paper is to present an approach to detect, isolate and accommodate the sensor or actuator faults using bank of observer and unknown input observers (UIO). Full order observers, reduced order observers, unknown input observers and Kalman Filter are widely used in state estimations [1]. After the estimation of states, fault detection and isolation can be provided by conducting residual analysis. Despite the existence of unknown inputs, fault detection and isolation is implemented for a very large, four-engined, cargo jet aircraft model. Sensor accommodation is realized via switching under redundant sensor existence assumption. Actuator accommodation is provided by gain scheduling. Hence, if a fault occurs in an actuator corresponding to the control surfaces, the remainder (n-1) actuators are used to avoid hazardous flight regime. Sensor or actuator faults are detected by using residuals. Sensor faults are effective on the outputs while actuator faults are effective on the state equations. Fault isolation is implemented by taking into account that each residual is sensitive to all of the other faults but one fault. Fault detection, isolation and accommodation are shown to be functional through the simulations.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)454-463
Sayfa sayısı10
DergiWSEAS Transactions on Systems and Control
Hacim5
Basın numarası6
Yayın durumuYayınlandı - 2010

Parmak izi

Design of fault tolerant flight control system' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap