Design of a vertically polarized omni-directional antenna at Ka-Band

Ismail Gungor; Alper Unal

doi:10.1109/APS.2016.7695773

Design of a vertically polarized omni-directional antenna at Ka-Band

Ismail Gungor
, Alper Unal

Meteksan Savunma

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

6 Atıf (Scopus)

Özet

In this paper, the design, analysis, and measurement results of a Ka-Band vertically polarized omni-directional antenna are presented. Antenna consists of a mode transducer and two metallic cones that are separated by a dielectric spacer. Mode transducer converts the incident TE10 from rectangular waveguide to a TM01 mode propagating inside a circular waveguide. Azimuthal symmetry of TM01 mode is employed to obtain an omni-directional radiation, while, metallic cones are used to shape the radiation pattern in the elevation plane. This way, an elevation beam width of 45 is obtained. Proposed antenna demonstrates 4.2 dBi gain in the center frequency and has approximately 5% return loss bandwidth. Numerical calculations of the antenna are carried out using CST Microwave Studio. Antenna is manufactured by a rapid casting process and measurements are performed by using a spherical near-field scanner.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	129-130
Sayfa sayısı	2
ISBN (Elektronik)	9781509028863
DOI'lar	https://doi.org/10.1109/APS.2016.7695773
Yayın durumu	Yayınlandı - 25 Eki 2016
Harici olarak yayınlandı	Evet
Etkinlik	2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Fajardo, Puerto Rico Süre: 26 Haz 2016 → 1 Tem 2016

Yayın serisi

Adı	2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016
Ülke/Bölge	Puerto Rico
Şehir	Fajardo
Periyot	26/06/16 → 1/07/16

Bibliyografik not

Publisher Copyright:
© 2016 IEEE.

Belgeye Erişim

10.1109/APS.2016.7695773

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Gungor, I., & Unal, A. (2016). Design of a vertically polarized omni-directional antenna at Ka-Band. In 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings (pp. 129-130). Makale 7695773 (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APS.2016.7695773

Gungor, Ismail ; Unal, Alper. / Design of a vertically polarized omni-directional antenna at Ka-Band. 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 129-130 (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings).

@inproceedings{43fe0611c57142c4b73a91c5d5c831c6,

title = "Design of a vertically polarized omni-directional antenna at Ka-Band",

abstract = "In this paper, the design, analysis, and measurement results of a Ka-Band vertically polarized omni-directional antenna are presented. Antenna consists of a mode transducer and two metallic cones that are separated by a dielectric spacer. Mode transducer converts the incident TE10 from rectangular waveguide to a TM01 mode propagating inside a circular waveguide. Azimuthal symmetry of TM01 mode is employed to obtain an omni-directional radiation, while, metallic cones are used to shape the radiation pattern in the elevation plane. This way, an elevation beam width of 45 is obtained. Proposed antenna demonstrates 4.2 dBi gain in the center frequency and has approximately 5\% return loss bandwidth. Numerical calculations of the antenna are carried out using CST Microwave Studio. Antenna is manufactured by a rapid casting process and measurements are performed by using a spherical near-field scanner.",

author = "Ismail Gungor and Alper Unal",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 ; Conference date: 26-06-2016 Through 01-07-2016",

year = "2016",

month = oct,

day = "25",

doi = "10.1109/APS.2016.7695773",

language = "English",

series = "2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "129--130",

booktitle = "2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings",

address = "United States",

}

Gungor, I & Unal, A 2016, Design of a vertically polarized omni-directional antenna at Ka-Band. in 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings., 7695773, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings, Institute of Electrical and Electronics Engineers Inc., pp. 129-130, 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016, Fajardo, Puerto Rico, 26/06/16. https://doi.org/10.1109/APS.2016.7695773

Design of a vertically polarized omni-directional antenna at Ka-Band. / Gungor, Ismail; Unal, Alper.
2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2016. p. 129-130 7695773 (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Design of a vertically polarized omni-directional antenna at Ka-Band

AU - Gungor, Ismail

AU - Unal, Alper

PY - 2016/10/25

Y1 - 2016/10/25

N2 - In this paper, the design, analysis, and measurement results of a Ka-Band vertically polarized omni-directional antenna are presented. Antenna consists of a mode transducer and two metallic cones that are separated by a dielectric spacer. Mode transducer converts the incident TE10 from rectangular waveguide to a TM01 mode propagating inside a circular waveguide. Azimuthal symmetry of TM01 mode is employed to obtain an omni-directional radiation, while, metallic cones are used to shape the radiation pattern in the elevation plane. This way, an elevation beam width of 45 is obtained. Proposed antenna demonstrates 4.2 dBi gain in the center frequency and has approximately 5% return loss bandwidth. Numerical calculations of the antenna are carried out using CST Microwave Studio. Antenna is manufactured by a rapid casting process and measurements are performed by using a spherical near-field scanner.

AB - In this paper, the design, analysis, and measurement results of a Ka-Band vertically polarized omni-directional antenna are presented. Antenna consists of a mode transducer and two metallic cones that are separated by a dielectric spacer. Mode transducer converts the incident TE10 from rectangular waveguide to a TM01 mode propagating inside a circular waveguide. Azimuthal symmetry of TM01 mode is employed to obtain an omni-directional radiation, while, metallic cones are used to shape the radiation pattern in the elevation plane. This way, an elevation beam width of 45 is obtained. Proposed antenna demonstrates 4.2 dBi gain in the center frequency and has approximately 5% return loss bandwidth. Numerical calculations of the antenna are carried out using CST Microwave Studio. Antenna is manufactured by a rapid casting process and measurements are performed by using a spherical near-field scanner.

UR - https://www.scopus.com/pages/publications/84997514504

U2 - 10.1109/APS.2016.7695773

DO - 10.1109/APS.2016.7695773

M3 - Conference contribution

AN - SCOPUS:84997514504

T3 - 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings

SP - 129

EP - 130

BT - 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016

Y2 - 26 June 2016 through 1 July 2016

ER -

Gungor I, Unal A. Design of a vertically polarized omni-directional antenna at Ka-Band. In 2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2016. p. 129-130. 7695773. (2016 IEEE Antennas and Propagation Society International Symposium, APSURSI 2016 - Proceedings). doi: 10.1109/APS.2016.7695773

Design of a vertically polarized omni-directional antenna at Ka-Band

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap