Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team

Adnan Alhallak; Güven Onur; Derya Ahmet Kocabas

doi:10.1109/ELECO60389.2023.10416024

Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team

Adnan Alhallak^*, Güven Onur, Derya Ahmet Kocabas

^*Bu çalışma için yazışmadan sorumlu yazar

Elektrik Mühendisliği Bölümü

Baykar Makine A.Ş.

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

For EV battery chargers, high-power density and high-efficiency charging methods are essential. Chargers can increase the disturbance on AC power grid and an efficient charger with low distortion is needed. The power arrangement for a battery charger comprises an AC-to-DC converter featuring power factor correction (PFC), followed by an isolated DC-to-DC converter. Because of its many benefits, the LLC-type series resonant converter has become the most popular topology.In this study, an EV charger was designed based on PFC and LLC resonant converters. The topology of the charger was investigated. The design equations of PFC and LLC resonant converters were given. Voltage loop control was implemented to the PFC converter and LLC resonant converter was controlled by a dual-loop control system. Continuous current (CC) and continuous voltage (CV) modes were implemented for safety. The completed design is served for the use of ITU Electrical Vehicle Team.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
ISBN (Elektronik)	9798350360493
DOI'lar	https://doi.org/10.1109/ELECO60389.2023.10416024
Yayın durumu	Yayınlandı - 2023
Etkinlik	14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Virtual, Bursa, Turkey Süre: 30 Kas 2023 → 2 Ara 2023

Yayın serisi

Adı	14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	14th International Conference on Electrical and Electronics Engineering, ELECO 2023
Ülke/Bölge	Turkey
Şehir	Virtual, Bursa
Periyot	30/11/23 → 2/12/23

Bibliyografik not

Publisher Copyright:
© 2023 IEEE.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

Belgeye Erişim

10.1109/ELECO60389.2023.10416024

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Alhallak, A., Onur, G., & Kocabas, D. A. (2023). Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team. In 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings (14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ELECO60389.2023.10416024

Alhallak, Adnan ; Onur, Güven ; Kocabas, Derya Ahmet. / Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team. 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2023. (14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings).

@inproceedings{c1ab92c0c3774a8a88568b66ed91f3bc,

title = "Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team",

abstract = "For EV battery chargers, high-power density and high-efficiency charging methods are essential. Chargers can increase the disturbance on AC power grid and an efficient charger with low distortion is needed. The power arrangement for a battery charger comprises an AC-to-DC converter featuring power factor correction (PFC), followed by an isolated DC-to-DC converter. Because of its many benefits, the LLC-type series resonant converter has become the most popular topology.In this study, an EV charger was designed based on PFC and LLC resonant converters. The topology of the charger was investigated. The design equations of PFC and LLC resonant converters were given. Voltage loop control was implemented to the PFC converter and LLC resonant converter was controlled by a dual-loop control system. Continuous current (CC) and continuous voltage (CV) modes were implemented for safety. The completed design is served for the use of ITU Electrical Vehicle Team.",

author = "Adnan Alhallak and G{\"u}ven Onur and Kocabas, {Derya Ahmet}",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 ; Conference date: 30-11-2023 Through 02-12-2023",

year = "2023",

doi = "10.1109/ELECO60389.2023.10416024",

language = "English",

series = "14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings",

address = "United States",

}

Alhallak, A, Onur, G & Kocabas, DA 2023, Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team. in 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings. 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings, Institute of Electrical and Electronics Engineers Inc., 14th International Conference on Electrical and Electronics Engineering, ELECO 2023, Virtual, Bursa, Turkey, 30/11/23. https://doi.org/10.1109/ELECO60389.2023.10416024

Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team. / Alhallak, Adnan; Onur, Güven ; Kocabas, Derya Ahmet.
14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2023. (14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team

AU - Alhallak, Adnan

AU - Onur, Güven

AU - Kocabas, Derya Ahmet

PY - 2023

Y1 - 2023

N2 - For EV battery chargers, high-power density and high-efficiency charging methods are essential. Chargers can increase the disturbance on AC power grid and an efficient charger with low distortion is needed. The power arrangement for a battery charger comprises an AC-to-DC converter featuring power factor correction (PFC), followed by an isolated DC-to-DC converter. Because of its many benefits, the LLC-type series resonant converter has become the most popular topology.In this study, an EV charger was designed based on PFC and LLC resonant converters. The topology of the charger was investigated. The design equations of PFC and LLC resonant converters were given. Voltage loop control was implemented to the PFC converter and LLC resonant converter was controlled by a dual-loop control system. Continuous current (CC) and continuous voltage (CV) modes were implemented for safety. The completed design is served for the use of ITU Electrical Vehicle Team.

AB - For EV battery chargers, high-power density and high-efficiency charging methods are essential. Chargers can increase the disturbance on AC power grid and an efficient charger with low distortion is needed. The power arrangement for a battery charger comprises an AC-to-DC converter featuring power factor correction (PFC), followed by an isolated DC-to-DC converter. Because of its many benefits, the LLC-type series resonant converter has become the most popular topology.In this study, an EV charger was designed based on PFC and LLC resonant converters. The topology of the charger was investigated. The design equations of PFC and LLC resonant converters were given. Voltage loop control was implemented to the PFC converter and LLC resonant converter was controlled by a dual-loop control system. Continuous current (CC) and continuous voltage (CV) modes were implemented for safety. The completed design is served for the use of ITU Electrical Vehicle Team.

UR - http://www.scopus.com/inward/record.url?scp=85185846283&partnerID=8YFLogxK

U2 - 10.1109/ELECO60389.2023.10416024

DO - 10.1109/ELECO60389.2023.10416024

M3 - Conference contribution

AN - SCOPUS:85185846283

T3 - 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings

BT - 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 14th International Conference on Electrical and Electronics Engineering, ELECO 2023

Y2 - 30 November 2023 through 2 December 2023

ER -

Alhallak A, Onur G , Kocabas DA. Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team. In 14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2023. (14th International Conference on Electrical and Electronics Engineering, ELECO 2023 - Proceedings). doi: 10.1109/ELECO60389.2023.10416024

Design and Simulation of a Resonant Converter Based EV Charger for ITUEV Team

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap