Design and manufacturing of a composite drive shaft

Samet Tataroǧlu; Erdem Ok; Sibel Kaya; Aykut Şen; Vedat Z. Doǧan; Zahit Mecitoǧlu; Erdem Akay; Sedat Sösler; Halit S. Törkmen

doi:10.4028/www.scientific.net/KEM.706.73

Design and manufacturing of a composite drive shaft

Samet Tataroǧlu
, Erdem Ok
, Sibel Kaya
, Aykut Şen
, Vedat Z. Doǧan
, Zahit Mecitoǧlu
, Erdem Akay
, Sedat Sösler
, Halit S. Törkmen

Istanbul Technical University
Ford Motor Company

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

5 Atıf (Scopus)

Özet

In this study, a composite drive shaft for heavy commercial vehicles is designed and manufactured. The carbon/epoxy composite material is used for the shaft tube and the end joints are made of steel. The material properties of the carbon/epoxy composite are obtained by performing coupon tests. The shaft tube is modeled using ANSYS finite element software. The static, buckling and modal analysis are achieved to obtain the Tsai-Wu strength ratio, the critical buckling torque and free vibration frequencies, respectively. The shaft tube is manufactured by using filament winding method. The steel end connections are bonded to the shaft tube during the filament winding process.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Materials and Technologies in Engineering Activity
Editörler	Guojian Chen, Haider F. Abdul Amir, Puneet Tandon, Poi Sim Khiew
Yayınlayan	Trans Tech Publications Ltd
Sayfalar	73-77
Sayfa sayısı	5
ISBN (Basılı)	9783038357315
DOI'lar	https://doi.org/10.4028/www.scientific.net/KEM.706.73
Yayın durumu	Yayınlandı - 2016
Etkinlik	International Conference on Design, Materials and Manufacturing, ICDMM 2016 - Kuala Lumpur, Malaysia Süre: 25 Mar 2016 → 27 Mar 2016

Yayın serisi

Adı	Key Engineering Materials
Hacim	706
ISSN (Basılı)	1013-9826
ISSN (Elektronik)	1662-9795

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	International Conference on Design, Materials and Manufacturing, ICDMM 2016
Ülke/Bölge	Malaysia
Şehir	Kuala Lumpur
Periyot	25/03/16 → 27/03/16

Bibliyografik not

Publisher Copyright:
© 2016 Trans Tech Publications, Switzerland.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.4028/www.scientific.net/KEM.706.73

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Tataroǧlu, S., Ok, E., Kaya, S., Şen, A., Doǧan, V. Z., Mecitoǧlu, Z., Akay, E., Sösler, S., & Törkmen, H. S. (2016). Design and manufacturing of a composite drive shaft. In G. Chen, H. F. A. Amir, P. Tandon, & P. S. Khiew (Eds.), Materials and Technologies in Engineering Activity (pp. 73-77). (Key Engineering Materials; Hac. 706). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/KEM.706.73

@inproceedings{b27cae79e3ab4545bad38cac68b995fa,

title = "Design and manufacturing of a composite drive shaft",

abstract = "In this study, a composite drive shaft for heavy commercial vehicles is designed and manufactured. The carbon/epoxy composite material is used for the shaft tube and the end joints are made of steel. The material properties of the carbon/epoxy composite are obtained by performing coupon tests. The shaft tube is modeled using ANSYS finite element software. The static, buckling and modal analysis are achieved to obtain the Tsai-Wu strength ratio, the critical buckling torque and free vibration frequencies, respectively. The shaft tube is manufactured by using filament winding method. The steel end connections are bonded to the shaft tube during the filament winding process.",

keywords = "Composite drive shaft, Coupon manufacture and testing, Filament winding, Finite Element Method, Tsai - Wu Failure Criterion.",

author = "Samet Tataroǧlu and Erdem Ok and Sibel Kaya and Aykut {\c S}en and Doǧan, \{Vedat Z.\} and Zahit Mecitoǧlu and Erdem Akay and Sedat S{\"o}sler and T{\"o}rkmen, \{Halit S.\}",

note = "Publisher Copyright: {\textcopyright} 2016 Trans Tech Publications, Switzerland.; International Conference on Design, Materials and Manufacturing, ICDMM 2016 ; Conference date: 25-03-2016 Through 27-03-2016",

year = "2016",

doi = "10.4028/www.scientific.net/KEM.706.73",

language = "English",

isbn = "9783038357315",

series = "Key Engineering Materials",

publisher = "Trans Tech Publications Ltd",

pages = "73--77",

editor = "Guojian Chen and Amir, \{Haider F. Abdul\} and Puneet Tandon and Khiew, \{Poi Sim\}",

booktitle = "Materials and Technologies in Engineering Activity",

address = "Switzerland",

}

Tataroǧlu, S, Ok, E, Kaya, S, Şen, A, Doǧan, VZ , Mecitoǧlu, Z, Akay, E, Sösler, S & Törkmen, HS 2016, Design and manufacturing of a composite drive shaft. in G Chen, HFA Amir, P Tandon & PS Khiew (eds), Materials and Technologies in Engineering Activity. Key Engineering Materials, hac. 706, Trans Tech Publications Ltd, pp. 73-77, International Conference on Design, Materials and Manufacturing, ICDMM 2016, Kuala Lumpur, Malaysia, 25/03/16. https://doi.org/10.4028/www.scientific.net/KEM.706.73

Design and manufacturing of a composite drive shaft. / Tataroǧlu, Samet; Ok, Erdem; Kaya, Sibel et al.
Materials and Technologies in Engineering Activity. ed. / Guojian Chen; Haider F. Abdul Amir; Puneet Tandon; Poi Sim Khiew. Trans Tech Publications Ltd, 2016. p. 73-77 (Key Engineering Materials; Hac. 706).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Design and manufacturing of a composite drive shaft

AU - Tataroǧlu, Samet

AU - Ok, Erdem

AU - Kaya, Sibel

AU - Şen, Aykut

AU - Doǧan, Vedat Z.

AU - Mecitoǧlu, Zahit

AU - Akay, Erdem

AU - Sösler, Sedat

AU - Törkmen, Halit S.

PY - 2016

Y1 - 2016

N2 - In this study, a composite drive shaft for heavy commercial vehicles is designed and manufactured. The carbon/epoxy composite material is used for the shaft tube and the end joints are made of steel. The material properties of the carbon/epoxy composite are obtained by performing coupon tests. The shaft tube is modeled using ANSYS finite element software. The static, buckling and modal analysis are achieved to obtain the Tsai-Wu strength ratio, the critical buckling torque and free vibration frequencies, respectively. The shaft tube is manufactured by using filament winding method. The steel end connections are bonded to the shaft tube during the filament winding process.

AB - In this study, a composite drive shaft for heavy commercial vehicles is designed and manufactured. The carbon/epoxy composite material is used for the shaft tube and the end joints are made of steel. The material properties of the carbon/epoxy composite are obtained by performing coupon tests. The shaft tube is modeled using ANSYS finite element software. The static, buckling and modal analysis are achieved to obtain the Tsai-Wu strength ratio, the critical buckling torque and free vibration frequencies, respectively. The shaft tube is manufactured by using filament winding method. The steel end connections are bonded to the shaft tube during the filament winding process.

KW - Composite drive shaft

KW - Coupon manufacture and testing

KW - Filament winding

KW - Finite Element Method

KW - Tsai - Wu Failure Criterion.

UR - https://www.scopus.com/pages/publications/84984614375

U2 - 10.4028/www.scientific.net/KEM.706.73

DO - 10.4028/www.scientific.net/KEM.706.73

M3 - Conference contribution

AN - SCOPUS:84984614375

SN - 9783038357315

T3 - Key Engineering Materials

SP - 73

EP - 77

BT - Materials and Technologies in Engineering Activity

A2 - Chen, Guojian

A2 - Amir, Haider F. Abdul

A2 - Tandon, Puneet

A2 - Khiew, Poi Sim

PB - Trans Tech Publications Ltd

T2 - International Conference on Design, Materials and Manufacturing, ICDMM 2016

Y2 - 25 March 2016 through 27 March 2016

ER -

Design and manufacturing of a composite drive shaft

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap