Design and Fabrication of X Band Frequency Selective Surface

Ece Yazarel; Merve Armaǧan; Kaǧan Çakir; Berk Bural; Betul Yildirim Budak; Kürşat Kazmanli; Turgut Cem Atasever

doi:10.1109/EMCTurkiye59424.2023.10287513

Design and Fabrication of X Band Frequency Selective Surface

Ece Yazarel^*, Merve Armaǧan, Kaǧan Çakir, Berk Bural, Betul Yildirim Budak, Kürşat Kazmanli, Turgut Cem Atasever

^*Bu çalışma için yazışmadan sorumlu yazar

Metalurji ve Malzeme Müh.Böl.

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

Özet

Frequency selective surfaces (FSS) have gained significant attention in recent years due to their potential applications in modern electromagnetic and communication systems. This paper presents the design, analysis and manufacturing of an X-band band stop FSS. The X-band, spanning frequencies from 8 to 12 GHz, holds an important place in radar and satellite communication systems The proposed FSS design, characterized by a square patch with a central circular hole, offers selective signal attenuation in this range. Glass fiber fabric is used as a substrate, providing a lightweight integration into aerospace structures and offering cost-effectiveness. Through a combination of theoretical modelling and simulation results, the paper validates the band stop characteristics of the FSS. Furthermore, the proposed FSS is fabricated using the photo lithography method, the measurement results shows that it can provide-45 dB insertion loss at resonance frequency.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
ISBN (Elektronik)	9798350342130
DOI'lar	https://doi.org/10.1109/EMCTurkiye59424.2023.10287513
Yayın durumu	Yayınlandı - 2023
Etkinlik	7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023 - Istanbul, Turkey Süre: 17 Eyl 2023 → 20 Eyl 2023

Yayın serisi

Adı	IEEE International Symposium on Electromagnetic Compatibility
ISSN (Basılı)	1077-4076
ISSN (Elektronik)	2158-1118

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023
Ülke/Bölge	Turkey
Şehir	Istanbul
Periyot	17/09/23 → 20/09/23

Bibliyografik not

Publisher Copyright:
© 2023 IEEE.

Belgeye Erişim

10.1109/EMCTurkiye59424.2023.10287513

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Yazarel, E., Armaǧan, M., Çakir, K., Bural, B., Budak, B. Y., Kazmanli, K., & Atasever, T. C. (2023). Design and Fabrication of X Band Frequency Selective Surface. In 2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023 (IEEE International Symposium on Electromagnetic Compatibility). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EMCTurkiye59424.2023.10287513

@inproceedings{c47e152b22cf40b5b9323e22dc061fc2,

title = "Design and Fabrication of X Band Frequency Selective Surface",

abstract = "Frequency selective surfaces (FSS) have gained significant attention in recent years due to their potential applications in modern electromagnetic and communication systems. This paper presents the design, analysis and manufacturing of an X-band band stop FSS. The X-band, spanning frequencies from 8 to 12 GHz, holds an important place in radar and satellite communication systems The proposed FSS design, characterized by a square patch with a central circular hole, offers selective signal attenuation in this range. Glass fiber fabric is used as a substrate, providing a lightweight integration into aerospace structures and offering cost-effectiveness. Through a combination of theoretical modelling and simulation results, the paper validates the band stop characteristics of the FSS. Furthermore, the proposed FSS is fabricated using the photo lithography method, the measurement results shows that it can provide-45 dB insertion loss at resonance frequency.",

keywords = "fabric FSS, frequency selective surface, photo lithography",

author = "Ece Yazarel and Merve Armaǧan and Kaǧan {\c C}akir and Berk Bural and Budak, {Betul Yildirim} and K{\"u}r{\c s}at Kazmanli and Atasever, {Turgut Cem}",

note = "Publisher Copyright: {\textcopyright} 2023 IEEE.; 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023 ; Conference date: 17-09-2023 Through 20-09-2023",

year = "2023",

doi = "10.1109/EMCTurkiye59424.2023.10287513",

language = "English",

series = "IEEE International Symposium on Electromagnetic Compatibility",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023",

address = "United States",

}

Yazarel, E, Armaǧan, M, Çakir, K, Bural, B, Budak, BY, Kazmanli, K & Atasever, TC 2023, Design and Fabrication of X Band Frequency Selective Surface. in 2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023. IEEE International Symposium on Electromagnetic Compatibility, Institute of Electrical and Electronics Engineers Inc., 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023, Istanbul, Turkey, 17/09/23. https://doi.org/10.1109/EMCTurkiye59424.2023.10287513

Design and Fabrication of X Band Frequency Selective Surface. / Yazarel, Ece; Armaǧan, Merve; Çakir, Kaǧan et al.
2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023. Institute of Electrical and Electronics Engineers Inc., 2023. (IEEE International Symposium on Electromagnetic Compatibility).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Design and Fabrication of X Band Frequency Selective Surface

AU - Yazarel, Ece

AU - Armaǧan, Merve

AU - Çakir, Kaǧan

AU - Bural, Berk

AU - Budak, Betul Yildirim

AU - Kazmanli, Kürşat

AU - Atasever, Turgut Cem

PY - 2023

Y1 - 2023

N2 - Frequency selective surfaces (FSS) have gained significant attention in recent years due to their potential applications in modern electromagnetic and communication systems. This paper presents the design, analysis and manufacturing of an X-band band stop FSS. The X-band, spanning frequencies from 8 to 12 GHz, holds an important place in radar and satellite communication systems The proposed FSS design, characterized by a square patch with a central circular hole, offers selective signal attenuation in this range. Glass fiber fabric is used as a substrate, providing a lightweight integration into aerospace structures and offering cost-effectiveness. Through a combination of theoretical modelling and simulation results, the paper validates the band stop characteristics of the FSS. Furthermore, the proposed FSS is fabricated using the photo lithography method, the measurement results shows that it can provide-45 dB insertion loss at resonance frequency.

AB - Frequency selective surfaces (FSS) have gained significant attention in recent years due to their potential applications in modern electromagnetic and communication systems. This paper presents the design, analysis and manufacturing of an X-band band stop FSS. The X-band, spanning frequencies from 8 to 12 GHz, holds an important place in radar and satellite communication systems The proposed FSS design, characterized by a square patch with a central circular hole, offers selective signal attenuation in this range. Glass fiber fabric is used as a substrate, providing a lightweight integration into aerospace structures and offering cost-effectiveness. Through a combination of theoretical modelling and simulation results, the paper validates the band stop characteristics of the FSS. Furthermore, the proposed FSS is fabricated using the photo lithography method, the measurement results shows that it can provide-45 dB insertion loss at resonance frequency.

KW - fabric FSS

KW - frequency selective surface

KW - photo lithography

UR - http://www.scopus.com/inward/record.url?scp=85178030312&partnerID=8YFLogxK

U2 - 10.1109/EMCTurkiye59424.2023.10287513

DO - 10.1109/EMCTurkiye59424.2023.10287513

M3 - Conference contribution

AN - SCOPUS:85178030312

T3 - IEEE International Symposium on Electromagnetic Compatibility

BT - 2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023

Y2 - 17 September 2023 through 20 September 2023

ER -

Yazarel E, Armaǧan M, Çakir K, Bural B, Budak BY, Kazmanli K et al. Design and Fabrication of X Band Frequency Selective Surface. In 2023 7th International Electromagnetic Compatibility Conference, EMC Turkiye 2023. Institute of Electrical and Electronics Engineers Inc. 2023. (IEEE International Symposium on Electromagnetic Compatibility). doi: 10.1109/EMCTurkiye59424.2023.10287513

Design and Fabrication of X Band Frequency Selective Surface

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap