Design and construction of an electric minibus

Ahmet Apak; Yigit Koyuncuoglu; Hasan Heceoglu; Ali Behlul Samur; Umut Dogan; Erkan Kurtulus; Bulent Unver; Metin Gokasan; Ata Mugan

doi:10.1109/ICMECH.2011.5971239

Design and construction of an electric minibus

Ahmet Apak^*
, Yigit Koyuncuoglu
, Hasan Heceoglu
, Ali Behlul Samur
, Umut Dogan
, Erkan Kurtulus
, Bulent Unver
, Metin Gokasan
, Ata Mugan

^*Bu çalışma için yazışmadan sorumlu yazar

Istanbul Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

1 Atıf (Scopus)

Özet

The design and construction stages of an electric minibus planned as a shuttle on the university campus are presented in this article. The electric vehicle (EV) is powered by an electric motor and no gear box is used. The criteria used in the choice of the electric motor, battery and power electronic units are presented. Important design parameters of electric vehicle are explained with a structural diagram. In addition, the controller of the vehicle and the communication between vehicle controller and motor controller via CAN Communication are given. Simulation studies are carried out to evaluate the energy consumption and the performance of selected components. Following, the first prototype electric minibus is constructed and tested. Various controllers are tested on the vehicle to improve the safety and efficiency.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings
Sayfalar	84-89
Sayfa sayısı	6
DOI'lar	https://doi.org/10.1109/ICMECH.2011.5971239
Yayın durumu	Yayınlandı - 2011
Etkinlik	2011 IEEE International Conference on Mechatronics, ICM 2011 - Istanbul, Türkiye Süre: 13 Nis 2011 → 15 Nis 2011

Yayın serisi

Adı	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	2011 IEEE International Conference on Mechatronics, ICM 2011
Ülke/Bölge	Türkiye
Şehir	Istanbul
Periyot	13/04/11 → 15/04/11

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji

Belgeye Erişim

10.1109/ICMECH.2011.5971239

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Apak, A., Koyuncuoglu, Y., Heceoglu, H., Samur, A. B., Dogan, U., Kurtulus, E., Unver, B., Gokasan, M., & Mugan, A. (2011). Design and construction of an electric minibus. In 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings (pp. 84-89). Makale 5971239 (2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings). https://doi.org/10.1109/ICMECH.2011.5971239

@inproceedings{0d736d92c3234918bcb686f827631389,

title = "Design and construction of an electric minibus",

abstract = "The design and construction stages of an electric minibus planned as a shuttle on the university campus are presented in this article. The electric vehicle (EV) is powered by an electric motor and no gear box is used. The criteria used in the choice of the electric motor, battery and power electronic units are presented. Important design parameters of electric vehicle are explained with a structural diagram. In addition, the controller of the vehicle and the communication between vehicle controller and motor controller via CAN Communication are given. Simulation studies are carried out to evaluate the energy consumption and the performance of selected components. Following, the first prototype electric minibus is constructed and tested. Various controllers are tested on the vehicle to improve the safety and efficiency.",

keywords = "electric vehicle, vehicle control",

author = "Ahmet Apak and Yigit Koyuncuoglu and Hasan Heceoglu and Samur, \{Ali Behlul\} and Umut Dogan and Erkan Kurtulus and Bulent Unver and Metin Gokasan and Ata Mugan",

year = "2011",

doi = "10.1109/ICMECH.2011.5971239",

language = "English",

isbn = "9781612849836",

series = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

pages = "84--89",

booktitle = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

note = "2011 IEEE International Conference on Mechatronics, ICM 2011 ; Conference date: 13-04-2011 Through 15-04-2011",

}

Apak, A, Koyuncuoglu, Y, Heceoglu, H, Samur, AB, Dogan, U, Kurtulus, E, Unver, B, Gokasan, M & Mugan, A 2011, Design and construction of an electric minibus. in 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings., 5971239, 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings, pp. 84-89, 2011 IEEE International Conference on Mechatronics, ICM 2011, Istanbul, Türkiye, 13/04/11. https://doi.org/10.1109/ICMECH.2011.5971239

Design and construction of an electric minibus. / Apak, Ahmet; Koyuncuoglu, Yigit; Heceoglu, Hasan et al.
2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings. 2011. p. 84-89 5971239 (2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Design and construction of an electric minibus

AU - Apak, Ahmet

AU - Koyuncuoglu, Yigit

AU - Heceoglu, Hasan

AU - Samur, Ali Behlul

AU - Dogan, Umut

AU - Kurtulus, Erkan

AU - Unver, Bulent

AU - Gokasan, Metin

AU - Mugan, Ata

PY - 2011

Y1 - 2011

N2 - The design and construction stages of an electric minibus planned as a shuttle on the university campus are presented in this article. The electric vehicle (EV) is powered by an electric motor and no gear box is used. The criteria used in the choice of the electric motor, battery and power electronic units are presented. Important design parameters of electric vehicle are explained with a structural diagram. In addition, the controller of the vehicle and the communication between vehicle controller and motor controller via CAN Communication are given. Simulation studies are carried out to evaluate the energy consumption and the performance of selected components. Following, the first prototype electric minibus is constructed and tested. Various controllers are tested on the vehicle to improve the safety and efficiency.

AB - The design and construction stages of an electric minibus planned as a shuttle on the university campus are presented in this article. The electric vehicle (EV) is powered by an electric motor and no gear box is used. The criteria used in the choice of the electric motor, battery and power electronic units are presented. Important design parameters of electric vehicle are explained with a structural diagram. In addition, the controller of the vehicle and the communication between vehicle controller and motor controller via CAN Communication are given. Simulation studies are carried out to evaluate the energy consumption and the performance of selected components. Following, the first prototype electric minibus is constructed and tested. Various controllers are tested on the vehicle to improve the safety and efficiency.

KW - electric vehicle

KW - vehicle control

UR - https://www.scopus.com/pages/publications/80052149366

U2 - 10.1109/ICMECH.2011.5971239

DO - 10.1109/ICMECH.2011.5971239

M3 - Conference contribution

AN - SCOPUS:80052149366

SN - 9781612849836

T3 - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

SP - 84

EP - 89

BT - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

T2 - 2011 IEEE International Conference on Mechatronics, ICM 2011

Y2 - 13 April 2011 through 15 April 2011

ER -

Design and construction of an electric minibus

Özet

Yayın serisi

???event.eventtypes.event.conference???

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap