Design and characterization of nonwoven fabrics for gas diffusion layer in polymer electrolyte membrane fuel cell

L. Isikel; I. Gocek; S. Adanur

doi:10.1080/00405000903083831

Design and characterization of nonwoven fabrics for gas diffusion layer in polymer electrolyte membrane fuel cell

L. Isikel
, I. Gocek
, S. Adanur^*

^*Bu çalışma için yazışmadan sorumlu yazar

Auburn University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

9 Atıf (Scopus)

Özet

Nonwoven materials for polymer electrolyte membrane fuel cells (PEMFC) were developed and evaluated. A PEMFC was built to study the membrane electrode assembly's (MEA) behavior during operation. New gas diffusion layer (GDL) structures were manufactured and characterized. The strength and resistance values of the new materials are comparable to those of the commercial materials tested. It was found that there is no correlation between GDL's initial thickness and its resistance. To optimize the water uptake in MEA, carbon fibers were impregnated with NaOH, which increased the resistance by 50%. Carbon/cellulose blended carbon paper has higher strength and resistance values than pure carbon fiber paper. For polyvinyl alcohol (PVA) coated carbon papers, drying temperature has a significant effect on resistance and strength. As the cellulose ratio decreases (PVA fiber amount increases), the resistance and strength of the carbon paper also decreases.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	1006-1014
Sayfa sayısı	9
Dergi	Journal of the Textile Institute
Hacim	101
Basın numarası	11
DOI'lar	https://doi.org/10.1080/00405000903083831
Yayın durumu	Yayınlandı - 2010
Harici olarak yayınlandı	Evet

Finansman

This study was supported by the US Department of Commerce through the National Textile Center (NTC), Grant No. 02-07400, and through the Novel and Advanced Polymeric Materials Program, Grant No. G00003860, which is appreciated. The authors would like to thank Dr Gopal Krishnagopalan, Steve Howard and Henry Cobb for their help with the experimental system and Dr Bruce Tatarchuk and Dr Peter Schwartz for their suggestions.

Finansörler	Finansör numarası
National Textile Center	G00003860, 02-07400
U.S. Department of Commerce

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji

Belgeye Erişim

10.1080/00405000903083831

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{08ef67cd7fb64b5f90abf671946ffa15,

title = "Design and characterization of nonwoven fabrics for gas diffusion layer in polymer electrolyte membrane fuel cell",

abstract = "Nonwoven materials for polymer electrolyte membrane fuel cells (PEMFC) were developed and evaluated. A PEMFC was built to study the membrane electrode assembly's (MEA) behavior during operation. New gas diffusion layer (GDL) structures were manufactured and characterized. The strength and resistance values of the new materials are comparable to those of the commercial materials tested. It was found that there is no correlation between GDL's initial thickness and its resistance. To optimize the water uptake in MEA, carbon fibers were impregnated with NaOH, which increased the resistance by 50\%. Carbon/cellulose blended carbon paper has higher strength and resistance values than pure carbon fiber paper. For polyvinyl alcohol (PVA) coated carbon papers, drying temperature has a significant effect on resistance and strength. As the cellulose ratio decreases (PVA fiber amount increases), the resistance and strength of the carbon paper also decreases.",

keywords = "Carbon paper, Conductivity, Fuel cell, Gas diffusion layer, Strength, Wet-laying",

author = "L. Isikel and I. Gocek and S. Adanur",

year = "2010",

doi = "10.1080/00405000903083831",

language = "English",

volume = "101",

pages = "1006--1014",

journal = "Journal of the Textile Institute",

issn = "0040-5000",

publisher = "Taylor and Francis Ltd.",

number = "11",

}

TY - JOUR

T1 - Design and characterization of nonwoven fabrics for gas diffusion layer in polymer electrolyte membrane fuel cell

AU - Isikel, L.

AU - Gocek, I.

AU - Adanur, S.

PY - 2010

Y1 - 2010

N2 - Nonwoven materials for polymer electrolyte membrane fuel cells (PEMFC) were developed and evaluated. A PEMFC was built to study the membrane electrode assembly's (MEA) behavior during operation. New gas diffusion layer (GDL) structures were manufactured and characterized. The strength and resistance values of the new materials are comparable to those of the commercial materials tested. It was found that there is no correlation between GDL's initial thickness and its resistance. To optimize the water uptake in MEA, carbon fibers were impregnated with NaOH, which increased the resistance by 50%. Carbon/cellulose blended carbon paper has higher strength and resistance values than pure carbon fiber paper. For polyvinyl alcohol (PVA) coated carbon papers, drying temperature has a significant effect on resistance and strength. As the cellulose ratio decreases (PVA fiber amount increases), the resistance and strength of the carbon paper also decreases.

AB - Nonwoven materials for polymer electrolyte membrane fuel cells (PEMFC) were developed and evaluated. A PEMFC was built to study the membrane electrode assembly's (MEA) behavior during operation. New gas diffusion layer (GDL) structures were manufactured and characterized. The strength and resistance values of the new materials are comparable to those of the commercial materials tested. It was found that there is no correlation between GDL's initial thickness and its resistance. To optimize the water uptake in MEA, carbon fibers were impregnated with NaOH, which increased the resistance by 50%. Carbon/cellulose blended carbon paper has higher strength and resistance values than pure carbon fiber paper. For polyvinyl alcohol (PVA) coated carbon papers, drying temperature has a significant effect on resistance and strength. As the cellulose ratio decreases (PVA fiber amount increases), the resistance and strength of the carbon paper also decreases.

KW - Carbon paper

KW - Conductivity

KW - Fuel cell

KW - Gas diffusion layer

KW - Strength

KW - Wet-laying

UR - https://www.scopus.com/pages/publications/77958068073

U2 - 10.1080/00405000903083831

DO - 10.1080/00405000903083831

M3 - Article

AN - SCOPUS:77958068073

SN - 0040-5000

VL - 101

SP - 1006

EP - 1014

JO - Journal of the Textile Institute

JF - Journal of the Textile Institute

IS - 11

ER -

Design and characterization of nonwoven fabrics for gas diffusion layer in polymer electrolyte membrane fuel cell

Özet

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap