Design, analysis, and control of a novel linear actuator

Ozgur Ustun; R. Nejat Tuncay

doi:10.1109/TIA.2006.876075

Design, analysis, and control of a novel linear actuator

Ozgur Ustun^*
, R. Nejat Tuncay

^*Bu çalışma için yazışmadan sorumlu yazar

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

30 Atıf (Scopus)

Özet

The main objective of this paper is to develop a linear actuator for an accurate position control with a high force-to-mass ratio. A novel configuration is developed that has a double-sided NdFeB stator and a printed-circuit moving armature. A design methodology is presented, which is based upon the finite-element method magnetic-circuit analysis, and a simulation software for performance predictions. The latter is developed in a VisSim environment. For design optimization, a new criteria are introduced. A hardware-in-the loop control technique is developed and applied to the designed motor. Micrometer position accuracy is achieved experimentally. It is shown that the computational and experimental performance values are in good agreement.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	1007-1013
Sayfa sayısı	7
Dergi	IEEE Transactions on Industry Applications
Hacim	42
Basın numarası	4
DOI'lar	https://doi.org/10.1109/TIA.2006.876075
Yayın durumu	Yayınlandı - Tem 2006

Finansman

Paper IPCSD-06-006, presented at the 2001 IEEE International Electric Machines and Drives Conference, Cambridge, MA, June 17–20, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Electric Machines Committee of the IEEE Industry Applications Society. Manuscript submitted for review June 19, 2001 and released for publication March 17, 2006. This work was supported by the Science and Technological Research Council of Turkey (TÜB˙TAK) under the EEEAG 197E047 Project.

Finansörler	Finansör numarası
Science and Technological Research Council of Turkey	197E047

Belgeye Erişim

10.1109/TIA.2006.876075

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{ca146835f06040828f436d2a37ce2d1c,

title = "Design, analysis, and control of a novel linear actuator",

abstract = "The main objective of this paper is to develop a linear actuator for an accurate position control with a high force-to-mass ratio. A novel configuration is developed that has a double-sided NdFeB stator and a printed-circuit moving armature. A design methodology is presented, which is based upon the finite-element method magnetic-circuit analysis, and a simulation software for performance predictions. The latter is developed in a VisSim environment. For design optimization, a new criteria are introduced. A hardware-in-the loop control technique is developed and applied to the designed motor. Micrometer position accuracy is achieved experimentally. It is shown that the computational and experimental performance values are in good agreement.",

keywords = "Linear motors, Modeling, Permanent-magnet motors, Position control",

author = "Ozgur Ustun and Tuncay, \{R. Nejat\}",

year = "2006",

month = jul,

doi = "10.1109/TIA.2006.876075",

language = "English",

volume = "42",

pages = "1007--1013",

journal = "IEEE Transactions on Industry Applications",

issn = "0093-9994",

number = "4",

}

TY - JOUR

T1 - Design, analysis, and control of a novel linear actuator

AU - Ustun, Ozgur

AU - Tuncay, R. Nejat

PY - 2006/7

Y1 - 2006/7

N2 - The main objective of this paper is to develop a linear actuator for an accurate position control with a high force-to-mass ratio. A novel configuration is developed that has a double-sided NdFeB stator and a printed-circuit moving armature. A design methodology is presented, which is based upon the finite-element method magnetic-circuit analysis, and a simulation software for performance predictions. The latter is developed in a VisSim environment. For design optimization, a new criteria are introduced. A hardware-in-the loop control technique is developed and applied to the designed motor. Micrometer position accuracy is achieved experimentally. It is shown that the computational and experimental performance values are in good agreement.

AB - The main objective of this paper is to develop a linear actuator for an accurate position control with a high force-to-mass ratio. A novel configuration is developed that has a double-sided NdFeB stator and a printed-circuit moving armature. A design methodology is presented, which is based upon the finite-element method magnetic-circuit analysis, and a simulation software for performance predictions. The latter is developed in a VisSim environment. For design optimization, a new criteria are introduced. A hardware-in-the loop control technique is developed and applied to the designed motor. Micrometer position accuracy is achieved experimentally. It is shown that the computational and experimental performance values are in good agreement.

KW - Linear motors

KW - Modeling

KW - Permanent-magnet motors

KW - Position control

UR - https://www.scopus.com/pages/publications/33746370401

U2 - 10.1109/TIA.2006.876075

DO - 10.1109/TIA.2006.876075

M3 - Article

AN - SCOPUS:33746370401

SN - 0093-9994

VL - 42

SP - 1007

EP - 1013

JO - IEEE Transactions on Industry Applications

JF - IEEE Transactions on Industry Applications

IS - 4

ER -

Design, analysis, and control of a novel linear actuator

Özet

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap