Compressive yielding of tungsten fiber reinforced bulk metallic glass composites

B. Clausen, S. Y. Lee, E. Üstündag*, C. C. Aydiner, R. D. Conner, M. A.M. Bourke

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Dergiye katkıMakalebilirkişi

59 Atıf (Scopus)

Özet

In-situ uniaxial compression tests were conducted on four tungsten fiber reinforced bulk metallic glass matrix composites using neutron diffraction. The results were interpreted with a finite element model. Both phases were seen to approximately obey the von Mises yield criterion. The fibers were observed to yield first and then transfer load to the matrix.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)123-128
Sayfa sayısı6
DergiScripta Materialia
Hacim49
Basın numarası2
DOI'lar
Yayın durumuYayınlandı - Tem 2003
Harici olarak yayınlandıEvet

Finansman

The work at Caltech was supported by the National Science Foundation (MRSEC program, DMR-0080065 and CAREER Award DMR-9985264). LANSCE is a national user facility funded by the United States Department of Energy, Office of Basic Energy Sciences, under contract number W-7405-ENG-36.

FinansörlerFinansör numarası
National Science Foundation
U.S. Department of Energy
Basic Energy SciencesW-7405-ENG-36
Materials Research Science and Engineering Center, Harvard UniversityDMR-9985264, DMR-0080065

    Parmak izi

    Compressive yielding of tungsten fiber reinforced bulk metallic glass composites' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

    Alıntı Yap