Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Naim Suleyman Ting; Yusuf Yasa; Ismail Aksoy; Yakup Sahin

doi:10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Naim Suleyman Ting
, Yusuf Yasa
, Ismail Aksoy
, Yakup Sahin

Yildiz Technical University

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

19 Atıf (Scopus)

Özet

In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Joint International Conference - ACEMP 2015
Ana bilgisayar yayını alt yazısı	Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems
Editörler	H. Bulent Ertan
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
Sayfalar	69-74
Sayfa sayısı	6
ISBN (Elektronik)	9781467372398
DOI'lar	https://doi.org/10.1109/OPTIM.2015.7426976
Yayın durumu	Yayınlandı - 7 Mar 2016
Harici olarak yayınlandı	Evet
Etkinlik	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 - Side, Turkey Süre: 2 Eyl 2015 → 4 Eyl 2015

Yayın serisi

Adı	Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015
Ülke/Bölge	Turkey
Şehir	Side
Periyot	2/09/15 → 4/09/15

Bibliyografik not

Publisher Copyright:
© 2015 IEEE.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji

Belgeye Erişim

10.1109/OPTIM.2015.7426976

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Ting, N. S., Yasa, Y., Aksoy, I., & Sahin, Y. (2016). Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. In H. B. Ertan (Ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems (pp. 69-74). Makale 7426976 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/OPTIM.2015.7426976

Ting, Naim Suleyman ; Yasa, Yusuf ; Aksoy, Ismail et al. / Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. editör / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 69-74 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

@inproceedings{6a53158816894362b742c1763cca8552,

title = "Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems",

abstract = "In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.",

keywords = "Field oriented control, PMSG, back to back converter, hysteresis control, space vector pulse width modulation",

author = "Ting, \{Naim Suleyman\} and Yusuf Yasa and Ismail Aksoy and Yakup Sahin",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 ; Conference date: 02-09-2015 Through 04-09-2015",

year = "2016",

month = mar,

day = "7",

doi = "10.1109/OPTIM.2015.7426976",

language = "English",

series = "Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "69--74",

editor = "Ertan, \{H. Bulent\}",

booktitle = "Joint International Conference - ACEMP 2015",

address = "United States",

}

Ting, NS, Yasa, Y, Aksoy, I & Sahin, Y 2016, Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. in HB Ertan (ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems., 7426976, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems, Institute of Electrical and Electronics Engineers Inc., pp. 69-74, 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015, Side, Turkey, 2/09/15. https://doi.org/10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. / Ting, Naim Suleyman; Yasa, Yusuf; Aksoy, Ismail et al.
Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. ed. / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. p. 69-74 7426976 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

AU - Ting, Naim Suleyman

AU - Yasa, Yusuf

AU - Aksoy, Ismail

AU - Sahin, Yakup

PY - 2016/3/7

Y1 - 2016/3/7

N2 - In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

AB - In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

KW - Field oriented control

KW - PMSG

KW - back to back converter

KW - hysteresis control

KW - space vector pulse width modulation

UR - https://www.scopus.com/pages/publications/84964937837

U2 - 10.1109/OPTIM.2015.7426976

DO - 10.1109/OPTIM.2015.7426976

M3 - Conference contribution

AN - SCOPUS:84964937837

T3 - Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

SP - 69

EP - 74

BT - Joint International Conference - ACEMP 2015

A2 - Ertan, H. Bulent

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015

Y2 - 2 September 2015 through 4 September 2015

ER -

Ting NS, Yasa Y, Aksoy I, Sahin Y. Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. In Ertan HB, editör, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. Institute of Electrical and Electronics Engineers Inc. 2016. p. 69-74. 7426976. (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). doi: 10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap