Özet
Design and production of a simple and low cost X-ray imaging system that can be used for light industrial applications was targeted in the Nuclear Physics Laboratory of Istanbul Technical University. In this study, production, transmission and detection of X-rays were simulated for the proposed imaging device. OX/70-P dental tube was used and X-ray spectra simulated by Geant4 were validated by comparison with X-ray spectra measured between 20 and 35 keV. Relative detection efficiency of the detector was also determined to confirm the physics processes used in the simulations. Various time optimization tools were performed to reduce the simulation time.
Orijinal dil | İngilizce |
---|---|
Sayfa (başlangıç-bitiş) | 50-53 |
Sayfa sayısı | 4 |
Dergi | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment |
Hacim | 799 |
DOI'lar | |
Yayın durumu | Yayınlandı - 14 Ağu 2015 |
Bibliyografik not
Publisher Copyright:© 2015 Elsevier B.V. All rights reserved.
Finansman
We would like to thank the Scientific and Technological Council of Turkey (TUBITAK) for supporting this work (113F104) .
Finansörler | Finansör numarası |
---|---|
TUBITAK | 113F104 |
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu |