Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers

S. Ilhan; D. Tuzun; A. Ozdemir

doi:10.1109/TDEI.2020.009183

Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers

S. Ilhan^*
, D. Tuzun
, A. Ozdemir

^*Bu çalışma için yazışmadan sorumlu yazar

Elektrik Mühendisliği Bölümü

Istanbul Technical University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

39 Atıf (Scopus)

Özet

This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.

Orijinal dil	İngilizce
Makale numarası	9405718
Sayfa (başlangıç-bitiş)	414-422
Sayfa sayısı	9
Dergi	IEEE Transactions on Dielectrics and Electrical Insulation
Hacim	28
Basın numarası	2
DOI'lar	https://doi.org/10.1109/TDEI.2020.009183
Yayın durumu	Yayınlandı - Nis 2021

Bibliyografik not

Publisher Copyright:
© 1994-2012 IEEE.

Finansman

The authors would like to acknowledge Professor E. A. Cherney, University of Waterloo, for his valuable contributions to this paper. This study was supported by the Scientific and Technological Research Council of Turkey (TUBITAK-1001, Project No:117E276).

Finansörler	Finansör numarası
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu	:117E276, TUBITAK-1001

Belgeye Erişim

10.1109/TDEI.2020.009183

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{5dedcc7ce0d24915a7b937a3778589d8,

title = "Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers",

abstract = "This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol\%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol\% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol\% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.",

keywords = "ATH filler, erosion, HTV silicone rubber, inclined-plane test, leakage current, maximum temperature, silica filler",

author = "S. Ilhan and D. Tuzun and A. Ozdemir",

note = "Publisher Copyright: {\textcopyright} 1994-2012 IEEE.",

year = "2021",

month = apr,

doi = "10.1109/TDEI.2020.009183",

language = "English",

volume = "28",

pages = "414--422",

journal = "IEEE Transactions on Dielectrics and Electrical Insulation",

issn = "1070-9878",

number = "2",

}

TY - JOUR

T1 - Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers

AU - Ilhan, S.

AU - Tuzun, D.

AU - Ozdemir, A.

PY - 2021/4

Y1 - 2021/4

N2 - This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.

AB - This paper presents a comparative evaluation of high temperature vulcanizing (HTV) silicone rubber consisting of ATH and silica fillers for use as the housing of outdoor composite insulators. Various volume filler fractions (vol%) of alumina trihydrate (ATH) and silica (SiO2) and several median particle sizes are incorporated into HTV silicone rubber and evaluated for erosion and tracking resistances using the inclined-plane tracking and erosion tests (IPT), in accordance with IEC 60587 at several AC test voltages. Test durations, eroded masses, erosion depths, and leakage currents are reported. The dry-band arcing temperatures of the various samples are recorded during the tests. The results show that at 30 vol% filler fractions, ATH filled samples show lower erosion than the corresponding silica filled samples; however, at 15 vol% fraction, the silica filled samples show lower erosion. For most tested conditions, the maximum dry-band temperatures of the silica filled samples are lower than the corresponding ATH filled samples.

KW - ATH filler

KW - erosion

KW - HTV silicone rubber

KW - inclined-plane test

KW - leakage current

KW - maximum temperature

KW - silica filler

UR - https://www.scopus.com/pages/publications/85104630038

U2 - 10.1109/TDEI.2020.009183

DO - 10.1109/TDEI.2020.009183

M3 - Article

AN - SCOPUS:85104630038

SN - 1070-9878

VL - 28

SP - 414

EP - 422

JO - IEEE Transactions on Dielectrics and Electrical Insulation

JF - IEEE Transactions on Dielectrics and Electrical Insulation

IS - 2

M1 - 9405718

ER -

Comparative Properties of HTV Silicone Rubber for Composite Insulators - ATH and Silica Fillers

Özet

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap