Combined parallel computing, dynamic mesh and heuristic algorithms in tapered wings

Ergüven Vatandaş*, Ibrahim Özkol

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde BölümKonferans katkısıbilirkişi

2 Atıf (Scopus)

Özet

In this study, Onera M6 wing has been optimized by two parameters, the wing section and the taper ratio by combining recent mostly preferable approaches i.e. parallel computing and evolutionary techniques. For the 3-D models developed during the optimization stages, the mesh required generated by dynamic mesh technique. The code developed for this aim in robust and faster than the codes, which are only producing mesh by classical techniques. An Euler flow solver is used to obtain the flow parameters for each member. Because the operating time of the code is very long, on account of our low capacity computer resources, parallel processing has been used. From the results, it is observed that the optimization process is working as expected. During the optimization process the lift coefficient and the thickness ratio are tried to be close to the design values determined at the beginning. The taper ratio is getting smaller while the code is trying to minimize the drag force. But it cannot be reduced to very small values and is kept almost the same at later steps, since the aim is that the drag force should not only be reduced but also the lift force be held close to the design value.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığıCollection of Technical Papers - 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
Ana bilgisayar yayını alt yazısı14th AIAA/ASME/AHS Adaptive Structures Conference, 8th AIAA Non-deterministic App
Sayfalar2832-2842
Sayfa sayısı11
Yayın durumuYayınlandı - 2006
Etkinlik47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference - Newport, RI, United States
Süre: 1 May 20064 May 2006

Yayın serisi

AdıCollection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
Hacim4
ISSN (Basılı)0273-4508

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
Ülke/BölgeUnited States
ŞehirNewport, RI
Periyot1/05/064/05/06

Parmak izi

Combined parallel computing, dynamic mesh and heuristic algorithms in tapered wings' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap