Chiral-lattice-filled composite tubes under uniaxial and lateral quasi-static load: Experimental studies

Kadir Gunaydin; Aykut Tamer; Halit Suleyman Turkmen; Giuseppe Sala; Antonio Mattia Grande

doi:10.3390/app11093735

Chiral-lattice-filled composite tubes under uniaxial and lateral quasi-static load: Experimental studies

Kadir Gunaydin^*
, Aykut Tamer
, Halit Suleyman Turkmen
, Giuseppe Sala
, Antonio Mattia Grande

^*Bu çalışma için yazışmadan sorumlu yazar

Uçak Mühendisliği Bölümü

Department of Aerospace Science and Technology
Polytechnic University of Milan
Imperial College London

Araştırma çıktısı: Dergi yayını › Makale › Hakemli

20 Atıf (Scopus)

Özet

Our research investigated the energy absorption characteristics of chiral auxetic lattices filled cylindrical composite tubes subjected to a uniaxial and lateral quasi-static load. The lattice structures were manufactured using a 3D printing technique. Carbon fiber composite tubes without filler material were initially subjected to uniaxial and lateral quasi-static crushing load. The same types of experiment were then performed on chiral lattices and chiral lattices filled composite tubes. For the different cases, the load–displacements curves were analyzed and the specific energy absorption (SEA) values were compared. The SEA capability for the axial quasi-static crushing of the chiral lattices filled composite tubes decreased in comparison with the hollow composite design. However, the most significant result was that the average SEA value in the case of lateral loading increased dramatically in comparison with the hollow composite configuration.

Orijinal dil	İngilizce
Makale numarası	3735
Dergi	Applied Sciences (Switzerland)
Hacim	11
Basın numarası	9
DOI'lar	https://doi.org/10.3390/app11093735
Yayın durumu	Yayınlandı - 1 May 2021

Bibliyografik not

Publisher Copyright:
© 2021 by the authors. Licensee MDPI, Basel, Switzerland.

Finansman

Funding: The experimental work of this paper was funded by Istanbul Technical University Industrial Researcher Training Programme (Istanbul Technical University and Republic of Turkey Ministry of Development) grant number ITU-AYP-2016-2. The APC was funded by Imperial College London Open Access Fund.

Finansörler	Finansör numarası
Imperial College London Open Access Fund
Istanbul Teknik Üniversitesi	ITU-AYP-2016-2

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.3390/app11093735

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{e163edf2155545eea1d96ebc2e5a1a7b,

title = "Chiral-lattice-filled composite tubes under uniaxial and lateral quasi-static load: Experimental studies",

abstract = "Our research investigated the energy absorption characteristics of chiral auxetic lattices filled cylindrical composite tubes subjected to a uniaxial and lateral quasi-static load. The lattice structures were manufactured using a 3D printing technique. Carbon fiber composite tubes without filler material were initially subjected to uniaxial and lateral quasi-static crushing load. The same types of experiment were then performed on chiral lattices and chiral lattices filled composite tubes. For the different cases, the load{\textendash}displacements curves were analyzed and the specific energy absorption (SEA) values were compared. The SEA capability for the axial quasi-static crushing of the chiral lattices filled composite tubes decreased in comparison with the hollow composite design. However, the most significant result was that the average SEA value in the case of lateral loading increased dramatically in comparison with the hollow composite configuration.",

keywords = "3D printing, Chiral auxetics, Composite tube, Crushing, Energy absorption",

author = "Kadir Gunaydin and Aykut Tamer and Turkmen, \{Halit Suleyman\} and Giuseppe Sala and Grande, \{Antonio Mattia\}",

note = "Publisher Copyright: {\textcopyright} 2021 by the authors. Licensee MDPI, Basel, Switzerland.",

year = "2021",

month = may,

day = "1",

doi = "10.3390/app11093735",

language = "English",

volume = "11",

journal = "Applied Sciences (Switzerland)",

issn = "2076-3417",

publisher = "Multidisciplinary Digital Publishing Institute (MDPI)",

number = "9",

}

TY - JOUR

T1 - Chiral-lattice-filled composite tubes under uniaxial and lateral quasi-static load

T2 - Experimental studies

AU - Gunaydin, Kadir

AU - Tamer, Aykut

AU - Turkmen, Halit Suleyman

AU - Sala, Giuseppe

AU - Grande, Antonio Mattia

PY - 2021/5/1

Y1 - 2021/5/1

N2 - Our research investigated the energy absorption characteristics of chiral auxetic lattices filled cylindrical composite tubes subjected to a uniaxial and lateral quasi-static load. The lattice structures were manufactured using a 3D printing technique. Carbon fiber composite tubes without filler material were initially subjected to uniaxial and lateral quasi-static crushing load. The same types of experiment were then performed on chiral lattices and chiral lattices filled composite tubes. For the different cases, the load–displacements curves were analyzed and the specific energy absorption (SEA) values were compared. The SEA capability for the axial quasi-static crushing of the chiral lattices filled composite tubes decreased in comparison with the hollow composite design. However, the most significant result was that the average SEA value in the case of lateral loading increased dramatically in comparison with the hollow composite configuration.

AB - Our research investigated the energy absorption characteristics of chiral auxetic lattices filled cylindrical composite tubes subjected to a uniaxial and lateral quasi-static load. The lattice structures were manufactured using a 3D printing technique. Carbon fiber composite tubes without filler material were initially subjected to uniaxial and lateral quasi-static crushing load. The same types of experiment were then performed on chiral lattices and chiral lattices filled composite tubes. For the different cases, the load–displacements curves were analyzed and the specific energy absorption (SEA) values were compared. The SEA capability for the axial quasi-static crushing of the chiral lattices filled composite tubes decreased in comparison with the hollow composite design. However, the most significant result was that the average SEA value in the case of lateral loading increased dramatically in comparison with the hollow composite configuration.

KW - 3D printing

KW - Chiral auxetics

KW - Composite tube

KW - Crushing

KW - Energy absorption

UR - https://www.scopus.com/pages/publications/85105145255

U2 - 10.3390/app11093735

DO - 10.3390/app11093735

M3 - Article

AN - SCOPUS:85105145255

SN - 2076-3417

VL - 11

JO - Applied Sciences (Switzerland)

JF - Applied Sciences (Switzerland)

IS - 9

M1 - 3735

ER -

Chiral-lattice-filled composite tubes under uniaxial and lateral quasi-static load: Experimental studies

Özet

Bibliyografik not

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap