CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles

Faraz Afshari; Ataollah Khanlari; Adnan Sözen; Azim Doğuş Tuncer; Ibrahim Ates; Bayram Sahin

doi:10.1177/09544089221128421

CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles

Faraz Afshari
, Ataollah Khanlari^*
, Adnan Sözen
, Azim Doğuş Tuncer
, Ibrahim Ates
, Bayram Sahin

^*Bu çalışma için yazışmadan sorumlu yazar

Makina Mühendisliği Bölümü

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

4 Atıf (Scopus)

Özet

An aerodynamically efficient blade is one of the prime necessities to extract the maximum mechanical power from a wind turbine. A number of researches are available in the literature studying blade design and configuration to improve aerodynamic characteristics of horizontal axis wind turbines. Less attention, however, has been devoted to wind turbines in terms of simultaneous optimization of blade and airfoil angles. The present study is important for the aerodynamic design and manufacturing of wind turbine blades. In this regard, various blade angles have been numerically simulated to determine the optimum blade angle. In addition to numerical analysis, experimental tests have been done to investigate NACA 4412 blade angle. As a result of this study, it was observed that blade angle in the range of 5°–10° showed the best performance among the tested various blade angles.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	1915-1925
Sayfa sayısı	11
Dergi	Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
Hacim	237
Basın numarası	5
DOI'lar	https://doi.org/10.1177/09544089221128421
Yayın durumu	Yayınlandı - Eki 2023

Bibliyografik not

Publisher Copyright:
© IMechE 2022.

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 7 Erişilebilir ve Temiz Enerji
SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.1177/09544089221128421

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Afshari, F., Khanlari, A., Sözen, A., Tuncer, A. D., Ates, I., & Sahin, B. (2023). CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237(5), 1915-1925. https://doi.org/10.1177/09544089221128421

@article{b4530e03887940178864bba33116cd61,

title = "CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles",

abstract = "An aerodynamically efficient blade is one of the prime necessities to extract the maximum mechanical power from a wind turbine. A number of researches are available in the literature studying blade design and configuration to improve aerodynamic characteristics of horizontal axis wind turbines. Less attention, however, has been devoted to wind turbines in terms of simultaneous optimization of blade and airfoil angles. The present study is important for the aerodynamic design and manufacturing of wind turbine blades. In this regard, various blade angles have been numerically simulated to determine the optimum blade angle. In addition to numerical analysis, experimental tests have been done to investigate NACA 4412 blade angle. As a result of this study, it was observed that blade angle in the range of 5°–10° showed the best performance among the tested various blade angles.",

keywords = "aerodynamic response, blade angle, NACA 4412, optimization, Wind turbine",

author = "Faraz Afshari and Ataollah Khanlari and Adnan S{\"o}zen and Tuncer, \{Azim Doğu{\c s}\} and Ibrahim Ates and Bayram Sahin",

note = "Publisher Copyright: {\textcopyright} IMechE 2022.",

year = "2023",

month = oct,

doi = "10.1177/09544089221128421",

language = "English",

volume = "237",

pages = "1915--1925",

journal = "Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering",

issn = "0954-4089",

publisher = "SAGE Publications Inc.",

number = "5",

}

Afshari, F, Khanlari, A, Sözen, A, Tuncer, AD, Ates, I & Sahin, B 2023, 'CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles', Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, hac. 237, no. 5, pp. 1915-1925. https://doi.org/10.1177/09544089221128421

CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles. / Afshari, Faraz; Khanlari, Ataollah; Sözen, Adnan et al.
In: Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Hac. 237, No. 5, 10.2023, p. 1915-1925.

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

TY - JOUR

T1 - CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles

AU - Afshari, Faraz

AU - Khanlari, Ataollah

AU - Sözen, Adnan

AU - Tuncer, Azim Doğuş

AU - Ates, Ibrahim

AU - Sahin, Bayram

PY - 2023/10

Y1 - 2023/10

N2 - An aerodynamically efficient blade is one of the prime necessities to extract the maximum mechanical power from a wind turbine. A number of researches are available in the literature studying blade design and configuration to improve aerodynamic characteristics of horizontal axis wind turbines. Less attention, however, has been devoted to wind turbines in terms of simultaneous optimization of blade and airfoil angles. The present study is important for the aerodynamic design and manufacturing of wind turbine blades. In this regard, various blade angles have been numerically simulated to determine the optimum blade angle. In addition to numerical analysis, experimental tests have been done to investigate NACA 4412 blade angle. As a result of this study, it was observed that blade angle in the range of 5°–10° showed the best performance among the tested various blade angles.

AB - An aerodynamically efficient blade is one of the prime necessities to extract the maximum mechanical power from a wind turbine. A number of researches are available in the literature studying blade design and configuration to improve aerodynamic characteristics of horizontal axis wind turbines. Less attention, however, has been devoted to wind turbines in terms of simultaneous optimization of blade and airfoil angles. The present study is important for the aerodynamic design and manufacturing of wind turbine blades. In this regard, various blade angles have been numerically simulated to determine the optimum blade angle. In addition to numerical analysis, experimental tests have been done to investigate NACA 4412 blade angle. As a result of this study, it was observed that blade angle in the range of 5°–10° showed the best performance among the tested various blade angles.

KW - aerodynamic response

KW - blade angle

KW - NACA 4412

KW - optimization

KW - Wind turbine

UR - https://www.scopus.com/pages/publications/85139417736

U2 - 10.1177/09544089221128421

DO - 10.1177/09544089221128421

M3 - Article

AN - SCOPUS:85139417736

SN - 0954-4089

VL - 237

SP - 1915

EP - 1925

JO - Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

JF - Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

IS - 5

ER -

Afshari F, Khanlari A, Sözen A, Tuncer AD, Ates I, Sahin B. CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2023 Eki;237(5):1915-1925. doi: 10.1177/09544089221128421

CFD analysis and experimental investigation to determine the flow characteristics around NACA 4412 airfoil blades at different wind speeds and blade angles

Özet

Bibliyografik not

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap