Backward tube spinning mechanics

Eren Can Sariyarlioglu, Omer Music*, Mustafa Bakkal

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

3 Atıf (Scopus)

Özet

Tube spinning is a continuous bulk forming technique used to produce seamless tubes. In the last six decades, tube spinning process has been applied to a wide range of engineering products; especially in automotive, aerospace and nuclear industry. However, understanding of the process mechanics is limited. Key references were published about 60 years ago. This paper investigates tube spinning mechanics using physical trials and a numerical model. Mechanisms of material accumulation, wave, bell-mouth and diametral growth in tube spinning are investigated and their mechanisms explained. Numerical model results show that both equivalent plastic strain and plastic strain rate are localised in the region immediately under and ahead of the roller producing highly non-uniform strain distributions and that the process reaches steady-state at an early stage. The stress state is dominated by compressive normal stresses in all three directions.

Orijinal dilİngilizce
Sayfa (başlangıç-bitiş)479-491
Sayfa sayısı13
DergiInternational Journal of Advanced Manufacturing Technology
Hacim123
Basın numarası1-2
DOI'lar
Yayın durumuYayınlandı - Kas 2022

Bibliyografik not

Publisher Copyright:
© 2022, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.

Parmak izi

Backward tube spinning mechanics' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap