Assessment of Occupational Health and Safety for a Gas Meter Manufacturing Plant

Araştırma sonucu: Dergiye katkıKonferans makalesibilirkişi

4 Atıf (Scopus)

Özet

This study investigates the occupational health and safety for a gas meter manufacturing plant. The risk assessment and management study is applied to plastic injection and mounting departments of the factory through quantitative Fine Kinney method and the effect of adopting 5S workplace organization procedure on risk assessment is examined. The risk assessment reveals that there are 17 risks involved; 14 grouped in high risk class (immediate improvement as required action); 2 in significant (measures to be taken as required action) and one in possible risk class (monitoring as required action). Among 14 high risks, 4 can be reduced by 83 % to be grouped under possible class when 5S is applied. One significant risk is observed to be lowered by 78 % and considered as possible risk due to the application of 5S. As a result of either 67 or 50 % reductions in 7 high risks, these risks are converted to be members of significant risk group after 5S implications.

Orijinal dilİngilizce
Makale numarası032015
DergiIOP Conference Series: Earth and Environmental Science
Hacim44
Basın numarası3
DOI'lar
Yayın durumuYayınlandı - 19 Eki 2016
EtkinlikWorld Multidisciplinary Earth Sciences Symposium, WMESS 2016 - Prague, Czech Republic
Süre: 5 Eyl 20169 Eyl 2016

Parmak izi

Assessment of Occupational Health and Safety for a Gas Meter Manufacturing Plant' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap