Özet
Gate Rudder® system is a new type of energy-saving and manoeuvring device to provide additional thrust, similar to an accelerating ducted propulsor. Individual control of the twin rudder blades aside the propeller also provides enhanced manoeuvrability. Based on the first full-scale application on a domestic container vessel in Japan, the Gate Rudder® system improved the propulsive efficiency (by ~14% fuel saving in sea trials) as well as manoeuvring, noise and vibrations characteristics of this vessel. More power saving in-service condition was also reported as high as 20–30%. In summary, the power-saving measured with the ship system was more than the predictions based on the CFD analyses and model tests. This has prompted the authors with further investigations on the Gate Rudder® system by detailed CFD analyses and new model tests with a larger size model of this container ship conducted at the Ata Nutku Ship Model Testing Laboratory of Istanbul Technical University (ITU). This paper investigates the influence of the Gate Rudder® on the ship performance by using two different scales of models for the same container ship and the full-scale data which are complemented by the RANS based CFD analyses. The results from the study are discussed to shed light on the scale effect as well as providing further information on the powering performance prediction of vessels with the Gate Rudder® system.
| Orijinal dil | İngilizce |
|---|---|
| Makale numarası | 108250 |
| Dergi | Ocean Engineering |
| Hacim | 218 |
| DOI'lar | |
| Yayın durumu | Yayınlandı - 15 Ara 2020 |
Bibliyografik not
Publisher Copyright:© 2020 Elsevier Ltd
Finansman
Model tests performed at the Ata Nutku Ship Model Testing Laboratory of Istanbul Technical University (ITU) are supported by Research Fund of the Istanbul Technical University with the project number of 39462. The authors thank Research Fund of the ITU for their support. The authors are also grateful to Kamome Propeller Co. Japan, for providing the model propellers and gate rudders used in the model tests. Our special thanks would be to Dr. Yalçın Ünsan and Research Assistant Çağatay Sabri Köksal of ITU, who helped on the design and manufacturing of rudder balances for tests and in the tests, respectively. Model tests performed at the Ata Nutku Ship Model Testing Laboratory of Istanbul Technical University ( ITU ) are supported by Research Fund of the Istanbul Technical University with the project number of 39462. The authors thank Research Fund of the ITU for their support. The authors are also grateful to Kamome Propeller Co., Japan, for providing the model propellers and gate rudders used in the model tests. Our special thanks would be to Dr. Yalçın Ünsan and Research Assistant Çağatay Sabri Köksal of ITU, who helped on the design and manufacturing of rudder balances for tests and in the tests, respectively.
| Finansörler | Finansör numarası |
|---|---|
| Kamome Propeller Co. | |
| International Technological University | |
| Istanbul Teknik Üniversitesi | 39462 |