An analytical model for compressive creep behavior of HDPE used in plastic pipe manufacturing

S. Sezer; S. Ataoglu; A. N. Gulluoglu; N. Kadioglu

doi:10.1080/03602550802497982

An analytical model for compressive creep behavior of HDPE used in plastic pipe manufacturing

S. Sezer
, S. Ataoglu^*
, A. N. Gulluoglu
, N. Kadioglu

^*Bu çalışma için yazışmadan sorumlu yazar

İnşaat Mühendisliği Bölümü

Yildiz Technical University
Marmara University
Istanbul Technical University

Araştırma sonucu: Dergiye katkı › Makale › bilirkişi

6 Atıf (Scopus)

Özet

The creep behavior of high-density polyethylene has been studied by low compressive creep tests, and empirical results were analyzed and compared with analytically predicted results. The tests are performed upon ASTM standard specimens at various stress levels in the linear region. After these analyses, a mathematical model is derived and used to predict creep strain for long periods of time from the strain-time data obtained at different stresses over a time interval of 24 h.

Orijinal dil	İngilizce
Sayfa (başlangıç-bitiş)	1302-1307
Sayfa sayısı	6
Dergi	Polymer - Plastics Technology and Engineering
Hacim	47
Basın numarası	12
DOI'lar	https://doi.org/10.1080/03602550802497982
Yayın durumu	Yayınlandı - 2008

Finansman

The authors gratefully acknowledge support from the Scientific and Technical Research Council of Turkey (TUBITAK) and Dizayn Group, Inc., for this work under Grant No. 104M130. Thanks are also due to O. Yenici and Ismail Topcu for their help.

Finansörler	Finansör numarası
Dizayn Group, Inc.	104M130
TUBITAK
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.1080/03602550802497982

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@article{42572e246cc343c793f61809bcc89f44,

title = "An analytical model for compressive creep behavior of HDPE used in plastic pipe manufacturing",

abstract = "The creep behavior of high-density polyethylene has been studied by low compressive creep tests, and empirical results were analyzed and compared with analytically predicted results. The tests are performed upon ASTM standard specimens at various stress levels in the linear region. After these analyses, a mathematical model is derived and used to predict creep strain for long periods of time from the strain-time data obtained at different stresses over a time interval of 24 h.",

keywords = "Burgers method, Creep, High-density polyethylene, Linear viscoelasticity, Modeling",

author = "S. Sezer and S. Ataoglu and Gulluoglu, \{A. N.\} and N. Kadioglu",

year = "2008",

doi = "10.1080/03602550802497982",

language = "English",

volume = "47",

pages = "1302--1307",

journal = "Polymer - Plastics Technology and Engineering",

issn = "0360-2559",

number = "12",

}

TY - JOUR

T1 - An analytical model for compressive creep behavior of HDPE used in plastic pipe manufacturing

AU - Sezer, S.

AU - Ataoglu, S.

AU - Gulluoglu, A. N.

AU - Kadioglu, N.

PY - 2008

Y1 - 2008

N2 - The creep behavior of high-density polyethylene has been studied by low compressive creep tests, and empirical results were analyzed and compared with analytically predicted results. The tests are performed upon ASTM standard specimens at various stress levels in the linear region. After these analyses, a mathematical model is derived and used to predict creep strain for long periods of time from the strain-time data obtained at different stresses over a time interval of 24 h.

AB - The creep behavior of high-density polyethylene has been studied by low compressive creep tests, and empirical results were analyzed and compared with analytically predicted results. The tests are performed upon ASTM standard specimens at various stress levels in the linear region. After these analyses, a mathematical model is derived and used to predict creep strain for long periods of time from the strain-time data obtained at different stresses over a time interval of 24 h.

KW - Burgers method

KW - Creep

KW - High-density polyethylene

KW - Linear viscoelasticity

KW - Modeling

UR - https://www.scopus.com/pages/publications/57249105368

U2 - 10.1080/03602550802497982

DO - 10.1080/03602550802497982

M3 - Article

AN - SCOPUS:57249105368

SN - 0360-2559

VL - 47

SP - 1302

EP - 1307

JO - Polymer - Plastics Technology and Engineering

JF - Polymer - Plastics Technology and Engineering

IS - 12

ER -

An analytical model for compressive creep behavior of HDPE used in plastic pipe manufacturing

Özet

Finansman

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap