Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Cagri Abis; Fatih Unal; Ata Mugan

doi:10.1109/ICMECH.2011.5971288

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Cagri Abis^*
, Fatih Unal
, Ata Mugan

^*Bu çalışma için yazışmadan sorumlu yazar

Makina Mühendisliği Bölümü

Istanbul Technical University

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

8 Atıf (Scopus)

Özet

In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings
Sayfalar	19-22
Sayfa sayısı	4
DOI'lar	https://doi.org/10.1109/ICMECH.2011.5971288
Yayın durumu	Yayınlandı - 2011
Etkinlik	2011 IEEE International Conference on Mechatronics, ICM 2011 - Istanbul, Türkiye Süre: 13 Nis 2011 → 15 Nis 2011

Yayın serisi

Adı	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	2011 IEEE International Conference on Mechatronics, ICM 2011
Ülke/Bölge	Türkiye
Şehir	Istanbul
Periyot	13/04/11 → 15/04/11

BM SKH

Bu sonuç, aşağıdaki Sürdürülebilir Kalkınma Hedefine/Hedeflerine katkıda bulunur

SKH 9 Sanayi, Yenilikçilik ve Altyapı

Belgeye Erişim

10.1109/ICMECH.2011.5971288

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

@inproceedings{35293151aee04169a1e832e1924e4032,

title = "Active vibration control with piezoelectric actuator on a lathe machine with a gain controller",

abstract = "In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.",

keywords = "Active Vibration Control, Lathe, Piezoelectric Stack, Surface Quality, Surface Roughness",

author = "Cagri Abis and Fatih Unal and Ata Mugan",

year = "2011",

doi = "10.1109/ICMECH.2011.5971288",

language = "English",

isbn = "9781612849836",

series = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

pages = "19--22",

booktitle = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

note = "2011 IEEE International Conference on Mechatronics, ICM 2011 ; Conference date: 13-04-2011 Through 15-04-2011",

}

Abis, C, Unal, F & Mugan, A 2011, Active vibration control with piezoelectric actuator on a lathe machine with a gain controller. in 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings., 5971288, 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings, pp. 19-22, 2011 IEEE International Conference on Mechatronics, ICM 2011, Istanbul, Türkiye, 13/04/11. https://doi.org/10.1109/ICMECH.2011.5971288

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller. / Abis, Cagri; Unal, Fatih; Mugan, Ata.
2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings. 2011. p. 19-22 5971288 (2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings).

Araştırma çıktısı: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › Hakem

TY - GEN

T1 - Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

AU - Abis, Cagri

AU - Unal, Fatih

AU - Mugan, Ata

PY - 2011

Y1 - 2011

N2 - In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

AB - In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

KW - Active Vibration Control

KW - Lathe

KW - Piezoelectric Stack

KW - Surface Quality

KW - Surface Roughness

UR - https://www.scopus.com/pages/publications/80052146244

U2 - 10.1109/ICMECH.2011.5971288

DO - 10.1109/ICMECH.2011.5971288

M3 - Conference contribution

AN - SCOPUS:80052146244

SN - 9781612849836

T3 - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

SP - 19

EP - 22

BT - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

T2 - 2011 IEEE International Conference on Mechatronics, ICM 2011

Y2 - 13 April 2011 through 15 April 2011

ER -

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Özet

Yayın serisi

???event.eventtypes.event.conference???

BM SKH

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap