Ana gezinime geç Aramaya geç Ana içeriğe geç

A study on influence of fluxing additives on magnesium refining process

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde BölümKonferans katkısıbilirkişi

Özet

This study aims to investigate the effect of different flux addition and time on refining of crown magnesium produced via Pidgeon Process. The different flux compositions (MgCl2, KC1, CaCl2, MgO, CaF 2, NaCl, and SiO2) with and without B2O 3 additions and reaction durations (15-45 min) were selected in order to lower the iron content in Mg ingot samples at 690 °C. The chemical composition of the final ingots was measured by using wet chemical analysis technique. Each final ingot was also subjected to a corrosion test to understand the influence of iron to Mg corrosion. It is found that selected flux compositions can decrease iron content in the Mg ingot from 0.080 % to 0.0027 %. The corrosion test results showed that corrosion rates decreased with decreasing iron content in Mg ingots. The minimum corrosion rate obtained was 0.235 mg/cm2/day.

Orijinal dilİngilizce
Ana bilgisayar yayını başlığıMagnesium Technology 2009
Sayfalar41-44
Sayfa sayısı4
Yayın durumuYayınlandı - 2009
EtkinlikMagnesium Technology 2009 - San Francisco, CA, United States
Süre: 15 Şub 200919 Şub 2009

Yayın serisi

AdıMagnesium Technology
ISSN (Basılı)1545-4150

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???Magnesium Technology 2009
Ülke/BölgeUnited States
ŞehirSan Francisco, CA
Periyot15/02/0919/02/09

Parmak izi

A study on influence of fluxing additives on magnesium refining process' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap