A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct

S. Ergin; M. Ota; H. Yamaguchi; M. Sakamoto

doi:10.1115/IMECE1996-0058

A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct

S. Ergin, M. Ota^*, H. Yamaguchi, M. Sakamoto

^*Bu çalışma için yazışmadan sorumlu yazar

Gemi İnş. ve Gemi Mak. Müh. Böl.

Tokyo Metropolitan University

Araştırma sonucu: ???type-name??? › Konferans katkısı › bilirkişi

Özet

The effect of varying interwall spacing on periodic fully developed turbulent flow in a corrugated duct is studied numerically. The k-s model is adopted for turbulent closure, and computation.s are performed for the ratio of the corrugation height to the interwall spacing ranging from 0.45 to 2.0, and for the corrugation angles of 30 and 45. The Reynolds number ranges from 500 to 7000 while the Prandtl number is 0.7. The numerical procedure and implementation of the k-E model is validated by comparing numerical results with the experimental data directly. I he result.s are also compared with the numerical values obtained by using a two-layer low-Reynolds number turbulence model. At a given Reynolds number. an increase in the interwall spacing increases the size of the separated region. On the other hand the friction factor first increases with the decreasing interwall spacing, reaches its maximum value, and then decreases.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Heat Transfer
Ana bilgisayar yayını alt yazısı	Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation
Yayınlayan	American Society of Mechanical Engineers (ASME)
Sayfalar	47-54
Sayfa sayısı	8
ISBN (Elektronik)	9780791815205
DOI'lar	https://doi.org/10.1115/IMECE1996-0058
Yayın durumu	Yayınlandı - 1996
Etkinlik	ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996 - Atlanta, United States Süre: 17 Kas 1996 → 22 Kas 1996

Yayın serisi

Adı	ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)
Hacim	1996-AI

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996
Ülke/Bölge	United States
Şehir	Atlanta
Periyot	17/11/96 → 22/11/96

Bibliyografik not

Publisher Copyright:
© 1996 American Society of Mechanical Engineers (ASME). All rights reserved.

Finansman

One of us. S. Ergin, gratefully acknowledges the financial support of Tokyo Metropolitan Government during her stay between the dates of September, 1995 and February, 1996 in Tokyo Metropolitan University, Tokyo, Japan.

Finansörler	Finansör numarası
Tokyo Metropolitan Government
Tokyo Metropolitan University

Belgeye Erişim

10.1115/IMECE1996-0058

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Ergin, S., Ota, M., Yamaguchi, H., & Sakamoto, M. (1996). A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct. In Heat Transfer: Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation (pp. 47-54). (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Hac. 1996-AI). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/IMECE1996-0058

Ergin, S. ; Ota, M. ; Yamaguchi, H. et al. / A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct. Heat Transfer: Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation. American Society of Mechanical Engineers (ASME), 1996. pp. 47-54 (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)).

@inproceedings{80d57f3749664d0f8021eb6504eee6a8,

title = "A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct",

abstract = "The effect of varying interwall spacing on periodic fully developed turbulent flow in a corrugated duct is studied numerically. The k-s model is adopted for turbulent closure, and computation.s are performed for the ratio of the corrugation height to the interwall spacing ranging from 0.45 to 2.0, and for the corrugation angles of 30 and 45. The Reynolds number ranges from 500 to 7000 while the Prandtl number is 0.7. The numerical procedure and implementation of the k-E model is validated by comparing numerical results with the experimental data directly. I he result.s are also compared with the numerical values obtained by using a two-layer low-Reynolds number turbulence model. At a given Reynolds number. an increase in the interwall spacing increases the size of the separated region. On the other hand the friction factor first increases with the decreasing interwall spacing, reaches its maximum value, and then decreases.",

author = "S. Ergin and M. Ota and H. Yamaguchi and M. Sakamoto",

note = "Publisher Copyright: {\textcopyright} 1996 American Society of Mechanical Engineers (ASME). All rights reserved.; ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996 ; Conference date: 17-11-1996 Through 22-11-1996",

year = "1996",

doi = "10.1115/IMECE1996-0058",

language = "English",

series = "ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)",

publisher = "American Society of Mechanical Engineers (ASME)",

pages = "47--54",

booktitle = "Heat Transfer",

address = "United States",

}

Ergin, S, Ota, M, Yamaguchi, H & Sakamoto, M 1996, A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct. in Heat Transfer: Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation. ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), hac. 1996-AI, American Society of Mechanical Engineers (ASME), pp. 47-54, ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996, Atlanta, United States, 17/11/96. https://doi.org/10.1115/IMECE1996-0058

A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct. / Ergin, S.; Ota, M.; Yamaguchi, H. et al.
Heat Transfer: Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation. American Society of Mechanical Engineers (ASME), 1996. p. 47-54 (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); Hac. 1996-AI).

Araştırma sonucu: ???type-name??? › Konferans katkısı › bilirkişi

TY - GEN

T1 - A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct

AU - Ergin, S.

AU - Ota, M.

AU - Yamaguchi, H.

AU - Sakamoto, M.

PY - 1996

Y1 - 1996

N2 - The effect of varying interwall spacing on periodic fully developed turbulent flow in a corrugated duct is studied numerically. The k-s model is adopted for turbulent closure, and computation.s are performed for the ratio of the corrugation height to the interwall spacing ranging from 0.45 to 2.0, and for the corrugation angles of 30 and 45. The Reynolds number ranges from 500 to 7000 while the Prandtl number is 0.7. The numerical procedure and implementation of the k-E model is validated by comparing numerical results with the experimental data directly. I he result.s are also compared with the numerical values obtained by using a two-layer low-Reynolds number turbulence model. At a given Reynolds number. an increase in the interwall spacing increases the size of the separated region. On the other hand the friction factor first increases with the decreasing interwall spacing, reaches its maximum value, and then decreases.

AB - The effect of varying interwall spacing on periodic fully developed turbulent flow in a corrugated duct is studied numerically. The k-s model is adopted for turbulent closure, and computation.s are performed for the ratio of the corrugation height to the interwall spacing ranging from 0.45 to 2.0, and for the corrugation angles of 30 and 45. The Reynolds number ranges from 500 to 7000 while the Prandtl number is 0.7. The numerical procedure and implementation of the k-E model is validated by comparing numerical results with the experimental data directly. I he result.s are also compared with the numerical values obtained by using a two-layer low-Reynolds number turbulence model. At a given Reynolds number. an increase in the interwall spacing increases the size of the separated region. On the other hand the friction factor first increases with the decreasing interwall spacing, reaches its maximum value, and then decreases.

UR - http://www.scopus.com/inward/record.url?scp=85169609514&partnerID=8YFLogxK

U2 - 10.1115/IMECE1996-0058

DO - 10.1115/IMECE1996-0058

M3 - Conference contribution

AN - SCOPUS:85169609514

T3 - ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)

SP - 47

EP - 54

BT - Heat Transfer

PB - American Society of Mechanical Engineers (ASME)

T2 - ASME 1996 International Mechanical Engineering Congress and Exposition, IMECE 1996

Y2 - 17 November 1996 through 22 November 1996

ER -

Ergin S, Ota M, Yamaguchi H, Sakamoto M. A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct. In Heat Transfer: Volume 2 � Heat Transfer in Turbulent Flows; Fundamentals of Convection Heat Transfer; Fundamentals of Natural Convection in Laminar and Turbulent Flows; Natural Circulation. American Society of Mechanical Engineers (ASME). 1996. p. 47-54. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE)). doi: 10.1115/IMECE1996-0058

A Numerical study of the effect of interwall spacing on turbulent flow in a corrugated duct

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap