A Collective Condition Monitoring Algorithm for On-Load Tap-Changers

Behnam Feizifar; Zdeněk Müller; Ghaeth Fandi; Omer Usta

doi:10.1109/EEEIC.2019.8783320

A Collective Condition Monitoring Algorithm for On-Load Tap-Changers

Behnam Feizifar
, Zdeněk Müller
, Ghaeth Fandi
, Omer Usta

Elektrik Mühendisliği Bölümü

Czech Technical University in Prague

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

14 Atıf (Scopus)

Özet

Transformer units are widely utilized to transfer the electric power over transmission and distribution networks efficiently. These units can be equipped with an on-load tap- changer (OLTC) to regulate the voltage level of power grids by tap changing operations between different steps of transformer winding to compensate unpredicted fluctuations of voltage. An OLTC is the solely moving and switching component of power transformers, thus it is highly prone to electrical, mechanical, and dielectric defects. Some international surveys indicate that the majority of the failures and outages with respect to power transformers are originated from malfunctions of OLTCs. This paper contains an analytical review of the existing methods for condition monitoring (CM) of OLTCs and proposes a collective CM algorithm, which considers the mechanical, electrical, and dielectric defects and degradations of OLTCs. The algorithm is designed to provide a comprehensive CM output for OLTCs by collecting different types of measurements from certain sensors used by different CM methods.

Orijinal dil	İngilizce
Ana bilgisayar yayını başlığı	Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019
Yayınlayan	Institute of Electrical and Electronics Engineers Inc.
ISBN (Elektronik)	9781728106526
DOI'lar	https://doi.org/10.1109/EEEIC.2019.8783320
Yayın durumu	Yayınlandı - Haz 2019
Etkinlik	19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 - Genoa, Italy Süre: 11 Haz 2019 → 14 Haz 2019

Yayın serisi

Adı	Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019
Ülke/Bölge	Italy
Şehir	Genoa
Periyot	11/06/19 → 14/06/19

Bibliyografik not

Publisher Copyright:
© 2019 IEEE.

Finansman

This research work has been supported by the project of International Mobility of Researchers in Czech Technical University (CTU) in Prague, Czech Republic, under the project no: CZ.02.2.69/0.0/0.0/16_027/0008465.

Finansörler	Finansör numarası
Czech Technical University	CZ.02.2.69/0.0/0.0/16_027/0008465

Belgeye Erişim

10.1109/EEEIC.2019.8783320

Diğer Dosyalar ve Linkler

Link to publication in Scopus

Alıntı Yap

Feizifar, B., Müller, Z., Fandi, G., & Usta, O. (2019). A Collective Condition Monitoring Algorithm for On-Load Tap-Changers. In Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 Makale 8783320 (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/EEEIC.2019.8783320

Feizifar, Behnam ; Müller, Zdeněk ; Fandi, Ghaeth et al. / A Collective Condition Monitoring Algorithm for On-Load Tap-Changers. Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc., 2019. (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019).

@inproceedings{6f5a9df34fb64669b4638c269f5b8501,

title = "A Collective Condition Monitoring Algorithm for On-Load Tap-Changers",

abstract = "Transformer units are widely utilized to transfer the electric power over transmission and distribution networks efficiently. These units can be equipped with an on-load tap- changer (OLTC) to regulate the voltage level of power grids by tap changing operations between different steps of transformer winding to compensate unpredicted fluctuations of voltage. An OLTC is the solely moving and switching component of power transformers, thus it is highly prone to electrical, mechanical, and dielectric defects. Some international surveys indicate that the majority of the failures and outages with respect to power transformers are originated from malfunctions of OLTCs. This paper contains an analytical review of the existing methods for condition monitoring (CM) of OLTCs and proposes a collective CM algorithm, which considers the mechanical, electrical, and dielectric defects and degradations of OLTCs. The algorithm is designed to provide a comprehensive CM output for OLTCs by collecting different types of measurements from certain sensors used by different CM methods.",

keywords = "condition monitoring, failure detection, on-load tap-changer, power transformer",

author = "Behnam Feizifar and Zden{\v e}k M{\"u}ller and Ghaeth Fandi and Omer Usta",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019 ; Conference date: 11-06-2019 Through 14-06-2019",

year = "2019",

month = jun,

doi = "10.1109/EEEIC.2019.8783320",

language = "English",

series = "Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019",

address = "United States",

}

Feizifar, B, Müller, Z, Fandi, G & Usta, O 2019, A Collective Condition Monitoring Algorithm for On-Load Tap-Changers. in Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019., 8783320, Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019, Institute of Electrical and Electronics Engineers Inc., 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019, Genoa, Italy, 11/06/19. https://doi.org/10.1109/EEEIC.2019.8783320

A Collective Condition Monitoring Algorithm for On-Load Tap-Changers. / Feizifar, Behnam; Müller, Zdeněk; Fandi, Ghaeth et al.
Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc., 2019. 8783320 (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019).

Araştırma sonucu: Kitap/Rapor/Konferans Bildirisinde Bölüm › Konferans katkısı › bilirkişi

TY - GEN

T1 - A Collective Condition Monitoring Algorithm for On-Load Tap-Changers

AU - Feizifar, Behnam

AU - Müller, Zdeněk

AU - Fandi, Ghaeth

AU - Usta, Omer

PY - 2019/6

Y1 - 2019/6

N2 - Transformer units are widely utilized to transfer the electric power over transmission and distribution networks efficiently. These units can be equipped with an on-load tap- changer (OLTC) to regulate the voltage level of power grids by tap changing operations between different steps of transformer winding to compensate unpredicted fluctuations of voltage. An OLTC is the solely moving and switching component of power transformers, thus it is highly prone to electrical, mechanical, and dielectric defects. Some international surveys indicate that the majority of the failures and outages with respect to power transformers are originated from malfunctions of OLTCs. This paper contains an analytical review of the existing methods for condition monitoring (CM) of OLTCs and proposes a collective CM algorithm, which considers the mechanical, electrical, and dielectric defects and degradations of OLTCs. The algorithm is designed to provide a comprehensive CM output for OLTCs by collecting different types of measurements from certain sensors used by different CM methods.

AB - Transformer units are widely utilized to transfer the electric power over transmission and distribution networks efficiently. These units can be equipped with an on-load tap- changer (OLTC) to regulate the voltage level of power grids by tap changing operations between different steps of transformer winding to compensate unpredicted fluctuations of voltage. An OLTC is the solely moving and switching component of power transformers, thus it is highly prone to electrical, mechanical, and dielectric defects. Some international surveys indicate that the majority of the failures and outages with respect to power transformers are originated from malfunctions of OLTCs. This paper contains an analytical review of the existing methods for condition monitoring (CM) of OLTCs and proposes a collective CM algorithm, which considers the mechanical, electrical, and dielectric defects and degradations of OLTCs. The algorithm is designed to provide a comprehensive CM output for OLTCs by collecting different types of measurements from certain sensors used by different CM methods.

KW - condition monitoring

KW - failure detection

KW - on-load tap-changer

KW - power transformer

UR - https://www.scopus.com/pages/publications/85070807048

U2 - 10.1109/EEEIC.2019.8783320

DO - 10.1109/EEEIC.2019.8783320

M3 - Conference contribution

AN - SCOPUS:85070807048

T3 - Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

BT - Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 19th IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019

Y2 - 11 June 2019 through 14 June 2019

ER -

Feizifar B, Müller Z, Fandi G, Usta O. A Collective Condition Monitoring Algorithm for On-Load Tap-Changers. In Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019. Institute of Electrical and Electronics Engineers Inc. 2019. 8783320. (Proceedings - 2019 IEEE International Conference on Environment and Electrical Engineering and 2019 IEEE Industrial and Commercial Power Systems Europe, EEEIC/I and CPS Europe 2019). doi: 10.1109/EEEIC.2019.8783320

A Collective Condition Monitoring Algorithm for On-Load Tap-Changers

Özet

Yayın serisi

???event.eventtypes.event.conference???

Bibliyografik not

Finansman

Belgeye Erişim

Diğer Dosyalar ve Linkler

Parmak izi

Alıntı Yap