ÜÇ KONİLİ ROTARİ MATKAPLARIN SEÇİMİNDE DİKKAT EDİLECEK ÖNEMLİ PARAMETRELER

Ömür Acaroğlu*, Selma Ünlü, Burcu Hasipek

*Bu çalışma için yazışmadan sorumlu yazar

Araştırma sonucu: ???type-name???Makalebilirkişi

Özet

Tricone bit is the most common used type of rotary drilling bits in surface mining. Even though IADC is usually used to select these bits, there are many parameters which affect drilling rate and durability of them. Users have tendency to select bits with higher IADC codes, since unqualified productions are becoming widespread in these days. This causes decreasing drilling rates and increasing costs. Firstly, a bit should be produced with right materials and proper metallurgical processes. Design parameters are also important to be appropriate for the formation drilled. In order to increase performance of selected bit, value of working parameters such as feed force and rotary speed should be defined according to formation properties during the operation. Users should consider not only bit cost but also cost of all drilling operation when they select proper bit.

Tercüme edilen katkı başlığıCRUCIAL PARAMETERS TO BE CONSIDERED FOR SELECTION OF ROTARY TRICONE BITS
Orijinal dilTürkçe
Sayfa (başlangıç-bitiş)275-285
Sayfa sayısı11
DergiScientific Mining Journal
Hacim59
Basın numarası4
DOI'lar
Yayın durumuYayınlandı - 2020
Harici olarak yayınlandıEvet

Bibliyografik not

Publisher Copyright:
© 2020 Union of Chambers of Engineers and Architects of Turkey. All rights reserved.

Keywords

  • Bit wear
  • Cost of drilling operation
  • Drilling rate
  • IADC
  • Rotary drilling method
  • Tricone bits

Parmak izi

ÜÇ KONİLİ ROTARİ MATKAPLARIN SEÇİMİNDE DİKKAT EDİLECEK ÖNEMLİ PARAMETRELER' araştırma başlıklarına git. Birlikte benzersiz bir parmak izi oluştururlar.

Alıntı Yap