Wideband hybrid power combiner using double-sided-parallel-strip lines

Mesut Atasoyu; Serdar Ozoguz; Selcuk Paker; Osman Palamutcuogullari

doi:10.1109/TSP.2016.7760866

Wideband hybrid power combiner using double-sided-parallel-strip lines

Mesut Atasoyu, Serdar Ozoguz, Selcuk Paker, Osman Palamutcuogullari

Department of Electronics and Communication Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A new design of a hybrid power combiner using double-sided parallel-striplines is proposed for wideband and high power applications. The circuit is used to realize a 4:1 power combiner. The use of double-sided parallel-strip lines adds flexibility to the design, since different characteristic impedances can readily be realized by simply adjusting the offset between parallel lines, without having to change the width of the lines. Moreover, a new approach using ferrite cores in order to improve low frequency performance of the power combiner is successfully applied. The proposed power combiner is studied analytically; its performance is verified via detailed HFSS simulations and measurements results.

Original language	English
Title of host publication	2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016
Editors	Norbert Herencsar
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	227-230
Number of pages	4
ISBN (Electronic)	9781509012886
DOIs	https://doi.org/10.1109/TSP.2016.7760866
Publication status	Published - 28 Nov 2016
Event	39th International Conference on Telecommunications and Signal Processing, TSP 2016 - Vienna, Austria Duration: 27 Jun 2016 → 29 Jun 2016

Publication series

Name	2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016

Conference

Conference	39th International Conference on Telecommunications and Signal Processing, TSP 2016
Country/Territory	Austria
City	Vienna
Period	27/06/16 → 29/06/16

Bibliographical note

Publisher Copyright:
© 2016 IEEE.

Keywords

Combiner
High power
Strip line
Wideband

Access to Document

10.1109/TSP.2016.7760866

Cite this

Atasoyu, M., Ozoguz, S., Paker, S., & Palamutcuogullari, O. (2016). Wideband hybrid power combiner using double-sided-parallel-strip lines. In N. Herencsar (Ed.), 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016 (pp. 227-230). Article 7760866 (2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/TSP.2016.7760866

Atasoyu, Mesut ; Ozoguz, Serdar ; Paker, Selcuk et al. / Wideband hybrid power combiner using double-sided-parallel-strip lines. 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016. editor / Norbert Herencsar. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 227-230 (2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016).

@inproceedings{2b5bdc119c02499cbe85c3208deba6ea,

title = "Wideband hybrid power combiner using double-sided-parallel-strip lines",

abstract = "A new design of a hybrid power combiner using double-sided parallel-striplines is proposed for wideband and high power applications. The circuit is used to realize a 4:1 power combiner. The use of double-sided parallel-strip lines adds flexibility to the design, since different characteristic impedances can readily be realized by simply adjusting the offset between parallel lines, without having to change the width of the lines. Moreover, a new approach using ferrite cores in order to improve low frequency performance of the power combiner is successfully applied. The proposed power combiner is studied analytically; its performance is verified via detailed HFSS simulations and measurements results.",

keywords = "Combiner, High power, Strip line, Wideband",

author = "Mesut Atasoyu and Serdar Ozoguz and Selcuk Paker and Osman Palamutcuogullari",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 39th International Conference on Telecommunications and Signal Processing, TSP 2016 ; Conference date: 27-06-2016 Through 29-06-2016",

year = "2016",

month = nov,

day = "28",

doi = "10.1109/TSP.2016.7760866",

language = "English",

series = "2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "227--230",

editor = "Norbert Herencsar",

booktitle = "2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016",

address = "United States",

}

Atasoyu, M, Ozoguz, S, Paker, S & Palamutcuogullari, O 2016, Wideband hybrid power combiner using double-sided-parallel-strip lines. in N Herencsar (ed.), 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016., 7760866, 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016, Institute of Electrical and Electronics Engineers Inc., pp. 227-230, 39th International Conference on Telecommunications and Signal Processing, TSP 2016, Vienna, Austria, 27/06/16. https://doi.org/10.1109/TSP.2016.7760866

Wideband hybrid power combiner using double-sided-parallel-strip lines. / Atasoyu, Mesut; Ozoguz, Serdar; Paker, Selcuk et al.
2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016. ed. / Norbert Herencsar. Institute of Electrical and Electronics Engineers Inc., 2016. p. 227-230 7760866 (2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Wideband hybrid power combiner using double-sided-parallel-strip lines

AU - Atasoyu, Mesut

AU - Ozoguz, Serdar

AU - Paker, Selcuk

AU - Palamutcuogullari, Osman

PY - 2016/11/28

Y1 - 2016/11/28

N2 - A new design of a hybrid power combiner using double-sided parallel-striplines is proposed for wideband and high power applications. The circuit is used to realize a 4:1 power combiner. The use of double-sided parallel-strip lines adds flexibility to the design, since different characteristic impedances can readily be realized by simply adjusting the offset between parallel lines, without having to change the width of the lines. Moreover, a new approach using ferrite cores in order to improve low frequency performance of the power combiner is successfully applied. The proposed power combiner is studied analytically; its performance is verified via detailed HFSS simulations and measurements results.

AB - A new design of a hybrid power combiner using double-sided parallel-striplines is proposed for wideband and high power applications. The circuit is used to realize a 4:1 power combiner. The use of double-sided parallel-strip lines adds flexibility to the design, since different characteristic impedances can readily be realized by simply adjusting the offset between parallel lines, without having to change the width of the lines. Moreover, a new approach using ferrite cores in order to improve low frequency performance of the power combiner is successfully applied. The proposed power combiner is studied analytically; its performance is verified via detailed HFSS simulations and measurements results.

KW - Combiner

KW - High power

KW - Strip line

KW - Wideband

UR - http://www.scopus.com/inward/record.url?scp=85006698990&partnerID=8YFLogxK

U2 - 10.1109/TSP.2016.7760866

DO - 10.1109/TSP.2016.7760866

M3 - Conference contribution

AN - SCOPUS:85006698990

T3 - 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016

SP - 227

EP - 230

BT - 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016

A2 - Herencsar, Norbert

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 39th International Conference on Telecommunications and Signal Processing, TSP 2016

Y2 - 27 June 2016 through 29 June 2016

ER -

Atasoyu M, Ozoguz S, Paker S, Palamutcuogullari O. Wideband hybrid power combiner using double-sided-parallel-strip lines. In Herencsar N, editor, 2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016. Institute of Electrical and Electronics Engineers Inc. 2016. p. 227-230. 7760866. (2016 39th International Conference on Telecommunications and Signal Processing, TSP 2016). doi: 10.1109/TSP.2016.7760866

Wideband hybrid power combiner using double-sided-parallel-strip lines

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this