Abstract
In this study, an estimation algorithm based on a two-stage Kalman filter (TSKF) was developed for wind speed and Unmanned Aerial Vehicle (UAV) motion parameters. In the first stage, the wind speed estimation algorithm is used with the help of the Global Positioning System (GPS) and dynamic pressure measurements. Extended Kalman Filter (EKF) is applied to the system. The state vector is composed of the wind speed components and the pitot scale factor. In the second stage, in order to estimate the state parameters of the UAV, GPS, and Inertial Measurement Unit (IMU) measurements are considered in a Linear Kalman filter. The second stage filter uses the first stage EKF estimates of the wind speed values. Between these two stages, a sensor fault detection algorithm is placed. The sensor fault detection algorithm is based on the first stage EKF innovation process. After detecting the fault on the sensor measurements, the state parameters of the UAV are estimated via robust Kalman filter (RKF) against sensor faults. The robust Kalman filter algorithm, which brings the fault tolerance feature to the filter, secures accurate estimation results in case of a faulty measurement without affecting the remaining good estimation characteristics. In simulations, noise increment and bias type of sensor faults are considered.
Original language | English |
---|---|
Pages (from-to) | 35-42 |
Number of pages | 8 |
Journal | Measurement Science Review |
Volume | 20 |
Issue number | 1 |
DOIs | |
Publication status | Published - 1 Feb 2020 |
Bibliographical note
Publisher Copyright:© 2020 Chingiz Hajiyev et al., published by Sciendo.
Keywords
- GPS
- Kalman filter
- Unmanned aerial vehicle
- fault detection
- pitot tube
- wind speed