Torque ripple reduction of SynRM using machaon type lamination

Ahmet Suat Kafadar; Alper Tap; Lale T. Ergene

doi:10.1109/CEIT.2018.8751815

Torque ripple reduction of SynRM using machaon type lamination

Ahmet Suat Kafadar, Alper Tap, Lale T. Ergene

Department of Electrical Engineering

Istanbul Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Abstract

Synchronous Reluctance Motors are becoming more popular due to their high performance characteristics. However, the most prominent problem of these motors is the torque ripple. There are a lot of studies in the literature to reduce the torque ripple of this type of motors. Machaon type rotor stands out as a good solution. This study presents the effects of Machaon rotor with different rotor layouts, having different dq axis insulation ratios, on the average torque and torque ripple of a 2.2 kW SynRM. Firstly, different dq axis insulation ratios and rotor slot pitch angles are applied to a classic rotor structure and results are presented. Most promising insulation ratios and rotor slot pitch angle combinations are then selected and combined into a single lamination, creating a Machaon rotor. The results are compared with the reference machine and classic rotor types on the basis of average torque and torque ripple.

Original language	English
Title of host publication	2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018
Editors	Seref Naci Engin, Dogan Onur Arisoy, Muhammed Ali Oz
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781538676417
DOIs	https://doi.org/10.1109/CEIT.2018.8751815
Publication status	Published - Oct 2018
Event	6th International Conference on Control Engineering and Information Technology, CEIT 2018 - Istanbul, Turkey Duration: 25 Oct 2018 → 27 Oct 2018

Publication series

Name	2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

Conference

Conference	6th International Conference on Control Engineering and Information Technology, CEIT 2018
Country/Territory	Turkey
City	Istanbul
Period	25/10/18 → 27/10/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

Funding

ACKNOWLEDGMENT Authors of this paper would like to thank to The Scientific and Technological Research Council of Turkey for their support on this study within the scope of 2209B funding.

Funders	Funder number
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu

Keywords

Asymmetric Rotor
Insulation Ratio
Machaon Rotor
Synchronous Motors
Synchronous Reluctance Motor

Access to Document

10.1109/CEIT.2018.8751815

Cite this

Kafadar, A. S., Tap, A., & Ergene, L. T. (2018). Torque ripple reduction of SynRM using machaon type lamination. In S. N. Engin, D. O. Arisoy, & M. A. Oz (Eds.), 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018 Article 8751815 (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CEIT.2018.8751815

Kafadar, Ahmet Suat ; Tap, Alper ; Ergene, Lale T. / Torque ripple reduction of SynRM using machaon type lamination. 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. editor / Seref Naci Engin ; Dogan Onur Arisoy ; Muhammed Ali Oz. Institute of Electrical and Electronics Engineers Inc., 2018. (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018).

@inproceedings{1794a88c9e5245c1b0a34f4c3a5831b9,

title = "Torque ripple reduction of SynRM using machaon type lamination",

abstract = "Synchronous Reluctance Motors are becoming more popular due to their high performance characteristics. However, the most prominent problem of these motors is the torque ripple. There are a lot of studies in the literature to reduce the torque ripple of this type of motors. Machaon type rotor stands out as a good solution. This study presents the effects of Machaon rotor with different rotor layouts, having different dq axis insulation ratios, on the average torque and torque ripple of a 2.2 kW SynRM. Firstly, different dq axis insulation ratios and rotor slot pitch angles are applied to a classic rotor structure and results are presented. Most promising insulation ratios and rotor slot pitch angle combinations are then selected and combined into a single lamination, creating a Machaon rotor. The results are compared with the reference machine and classic rotor types on the basis of average torque and torque ripple.",

keywords = "Asymmetric Rotor, Insulation Ratio, Machaon Rotor, Synchronous Motors, Synchronous Reluctance Motor",

author = "Kafadar, {Ahmet Suat} and Alper Tap and Ergene, {Lale T.}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 6th International Conference on Control Engineering and Information Technology, CEIT 2018 ; Conference date: 25-10-2018 Through 27-10-2018",

year = "2018",

month = oct,

doi = "10.1109/CEIT.2018.8751815",

language = "English",

series = "2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

editor = "Engin, {Seref Naci} and Arisoy, {Dogan Onur} and Oz, {Muhammed Ali}",

booktitle = "2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018",

address = "United States",

}

Kafadar, AS, Tap, A & Ergene, LT 2018, Torque ripple reduction of SynRM using machaon type lamination. in SN Engin, DO Arisoy & MA Oz (eds), 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018., 8751815, 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018, Institute of Electrical and Electronics Engineers Inc., 6th International Conference on Control Engineering and Information Technology, CEIT 2018, Istanbul, Turkey, 25/10/18. https://doi.org/10.1109/CEIT.2018.8751815

Torque ripple reduction of SynRM using machaon type lamination. / Kafadar, Ahmet Suat; Tap, Alper; Ergene, Lale T.
2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. ed. / Seref Naci Engin; Dogan Onur Arisoy; Muhammed Ali Oz. Institute of Electrical and Electronics Engineers Inc., 2018. 8751815 (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Torque ripple reduction of SynRM using machaon type lamination

AU - Kafadar, Ahmet Suat

AU - Tap, Alper

AU - Ergene, Lale T.

PY - 2018/10

Y1 - 2018/10

N2 - Synchronous Reluctance Motors are becoming more popular due to their high performance characteristics. However, the most prominent problem of these motors is the torque ripple. There are a lot of studies in the literature to reduce the torque ripple of this type of motors. Machaon type rotor stands out as a good solution. This study presents the effects of Machaon rotor with different rotor layouts, having different dq axis insulation ratios, on the average torque and torque ripple of a 2.2 kW SynRM. Firstly, different dq axis insulation ratios and rotor slot pitch angles are applied to a classic rotor structure and results are presented. Most promising insulation ratios and rotor slot pitch angle combinations are then selected and combined into a single lamination, creating a Machaon rotor. The results are compared with the reference machine and classic rotor types on the basis of average torque and torque ripple.

AB - Synchronous Reluctance Motors are becoming more popular due to their high performance characteristics. However, the most prominent problem of these motors is the torque ripple. There are a lot of studies in the literature to reduce the torque ripple of this type of motors. Machaon type rotor stands out as a good solution. This study presents the effects of Machaon rotor with different rotor layouts, having different dq axis insulation ratios, on the average torque and torque ripple of a 2.2 kW SynRM. Firstly, different dq axis insulation ratios and rotor slot pitch angles are applied to a classic rotor structure and results are presented. Most promising insulation ratios and rotor slot pitch angle combinations are then selected and combined into a single lamination, creating a Machaon rotor. The results are compared with the reference machine and classic rotor types on the basis of average torque and torque ripple.

KW - Asymmetric Rotor

KW - Insulation Ratio

KW - Machaon Rotor

KW - Synchronous Motors

KW - Synchronous Reluctance Motor

UR - http://www.scopus.com/inward/record.url?scp=85069222272&partnerID=8YFLogxK

U2 - 10.1109/CEIT.2018.8751815

DO - 10.1109/CEIT.2018.8751815

M3 - Conference contribution

AN - SCOPUS:85069222272

T3 - 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

BT - 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

A2 - Engin, Seref Naci

A2 - Arisoy, Dogan Onur

A2 - Oz, Muhammed Ali

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 6th International Conference on Control Engineering and Information Technology, CEIT 2018

Y2 - 25 October 2018 through 27 October 2018

ER -

Kafadar AS, Tap A, Ergene LT. Torque ripple reduction of SynRM using machaon type lamination. In Engin SN, Arisoy DO, Oz MA, editors, 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8751815. (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018). doi: 10.1109/CEIT.2018.8751815

Torque ripple reduction of SynRM using machaon type lamination

Abstract

Publication series

Conference

Bibliographical note

Funding

Keywords

Access to Document

Other files and links

Fingerprint

Cite this