The analysis of different stator designs of a PMSM for elevator application

Hosein Bakhtiarzadeh; Abdullah Polat; Lale T. Ergene

doi:10.1109/CEIT.2018.8751830

The analysis of different stator designs of a PMSM for elevator application

Hosein Bakhtiarzadeh, Abdullah Polat, Lale T. Ergene

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

In this paper, permanent magnet synchronous motor (PMSM) used in an elevator which can lift eight people with the linear speed of 1 m/s, is evaluated. Five different PMSMs are designed and compared to each other. Number of poles, load, input voltage and main dimensions (inner and outer diameter of rotor and stator and length) is kept the same for all the motors. However different number of stator slots (36, 48, 54 and 60) and different winding layouts are designed. All the motors are modelled by using ANSYS Maxwell that is finite element method (FEM) based commercial software. The results are compared in terms of the induced voltage, induced voltage harmonics and torque output.

Original language	English
Title of host publication	2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018
Editors	Seref Naci Engin, Dogan Onur Arisoy, Muhammed Ali Oz
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781538676417
DOIs	https://doi.org/10.1109/CEIT.2018.8751830
Publication status	Published - Oct 2018
Event	6th International Conference on Control Engineering and Information Technology, CEIT 2018 - Istanbul, Turkey Duration: 25 Oct 2018 → 27 Oct 2018

Publication series

Name	2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

Conference

Conference	6th International Conference on Control Engineering and Information Technology, CEIT 2018
Country/Territory	Turkey
City	Istanbul
Period	25/10/18 → 27/10/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

Keywords

Elevator
FEM
Harmonics
PMSM
Torque ripple

Access to Document

10.1109/CEIT.2018.8751830

Cite this

Bakhtiarzadeh, H., Polat, A., & Ergene, L. T. (2018). The analysis of different stator designs of a PMSM for elevator application. In S. N. Engin, D. O. Arisoy, & M. A. Oz (Eds.), 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018 Article 8751830 (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/CEIT.2018.8751830

Bakhtiarzadeh, Hosein ; Polat, Abdullah ; Ergene, Lale T. / The analysis of different stator designs of a PMSM for elevator application. 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. editor / Seref Naci Engin ; Dogan Onur Arisoy ; Muhammed Ali Oz. Institute of Electrical and Electronics Engineers Inc., 2018. (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018).

@inproceedings{fce567c03a654a3ca85f20f3c9484ca6,

title = "The analysis of different stator designs of a PMSM for elevator application",

abstract = "In this paper, permanent magnet synchronous motor (PMSM) used in an elevator which can lift eight people with the linear speed of 1 m/s, is evaluated. Five different PMSMs are designed and compared to each other. Number of poles, load, input voltage and main dimensions (inner and outer diameter of rotor and stator and length) is kept the same for all the motors. However different number of stator slots (36, 48, 54 and 60) and different winding layouts are designed. All the motors are modelled by using ANSYS Maxwell that is finite element method (FEM) based commercial software. The results are compared in terms of the induced voltage, induced voltage harmonics and torque output.",

keywords = "Elevator, FEM, Harmonics, PMSM, Torque ripple",

author = "Hosein Bakhtiarzadeh and Abdullah Polat and Ergene, {Lale T.}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 6th International Conference on Control Engineering and Information Technology, CEIT 2018 ; Conference date: 25-10-2018 Through 27-10-2018",

year = "2018",

month = oct,

doi = "10.1109/CEIT.2018.8751830",

language = "English",

series = "2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

editor = "Engin, {Seref Naci} and Arisoy, {Dogan Onur} and Oz, {Muhammed Ali}",

booktitle = "2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018",

address = "United States",

}

Bakhtiarzadeh, H, Polat, A & Ergene, LT 2018, The analysis of different stator designs of a PMSM for elevator application. in SN Engin, DO Arisoy & MA Oz (eds), 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018., 8751830, 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018, Institute of Electrical and Electronics Engineers Inc., 6th International Conference on Control Engineering and Information Technology, CEIT 2018, Istanbul, Turkey, 25/10/18. https://doi.org/10.1109/CEIT.2018.8751830

The analysis of different stator designs of a PMSM for elevator application. / Bakhtiarzadeh, Hosein; Polat, Abdullah; Ergene, Lale T.
2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. ed. / Seref Naci Engin; Dogan Onur Arisoy; Muhammed Ali Oz. Institute of Electrical and Electronics Engineers Inc., 2018. 8751830 (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - The analysis of different stator designs of a PMSM for elevator application

AU - Bakhtiarzadeh, Hosein

AU - Polat, Abdullah

AU - Ergene, Lale T.

PY - 2018/10

Y1 - 2018/10

N2 - In this paper, permanent magnet synchronous motor (PMSM) used in an elevator which can lift eight people with the linear speed of 1 m/s, is evaluated. Five different PMSMs are designed and compared to each other. Number of poles, load, input voltage and main dimensions (inner and outer diameter of rotor and stator and length) is kept the same for all the motors. However different number of stator slots (36, 48, 54 and 60) and different winding layouts are designed. All the motors are modelled by using ANSYS Maxwell that is finite element method (FEM) based commercial software. The results are compared in terms of the induced voltage, induced voltage harmonics and torque output.

AB - In this paper, permanent magnet synchronous motor (PMSM) used in an elevator which can lift eight people with the linear speed of 1 m/s, is evaluated. Five different PMSMs are designed and compared to each other. Number of poles, load, input voltage and main dimensions (inner and outer diameter of rotor and stator and length) is kept the same for all the motors. However different number of stator slots (36, 48, 54 and 60) and different winding layouts are designed. All the motors are modelled by using ANSYS Maxwell that is finite element method (FEM) based commercial software. The results are compared in terms of the induced voltage, induced voltage harmonics and torque output.

KW - Elevator

KW - FEM

KW - Harmonics

KW - PMSM

KW - Torque ripple

UR - http://www.scopus.com/inward/record.url?scp=85069151654&partnerID=8YFLogxK

U2 - 10.1109/CEIT.2018.8751830

DO - 10.1109/CEIT.2018.8751830

M3 - Conference contribution

AN - SCOPUS:85069151654

T3 - 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

BT - 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018

A2 - Engin, Seref Naci

A2 - Arisoy, Dogan Onur

A2 - Oz, Muhammed Ali

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 6th International Conference on Control Engineering and Information Technology, CEIT 2018

Y2 - 25 October 2018 through 27 October 2018

ER -

Bakhtiarzadeh H, Polat A, Ergene LT. The analysis of different stator designs of a PMSM for elevator application. In Engin SN, Arisoy DO, Oz MA, editors, 2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018. Institute of Electrical and Electronics Engineers Inc. 2018. 8751830. (2018 6th International Conference on Control Engineering and Information Technology, CEIT 2018). doi: 10.1109/CEIT.2018.8751830

The analysis of different stator designs of a PMSM for elevator application

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this