Sliding tribological characteristics of Zr-based bulk metallic glass under lubricated conditions

Mustafa Bakkal

doi:10.1016/j.intermet.2010.02.003

Sliding tribological characteristics of Zr-based bulk metallic glass under lubricated conditions

Mustafa Bakkal^*

^*Corresponding author for this work

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

22 Citations (Scopus)

Abstract

This paper presents the effect of lubricant, SAE EP 90, on tribological properties of Zr-based bulk metallic glass. The coefficient of friction and wear rate values were evaluated for the wide range of applied normal loads (5-40 N) and contact sliding speeds (0.15-1.60 m/s). Wear and friction properties of tribolayers were strongly affected by both parameters throughout the study. Overall average coefficient of friction values were less than 0.1 in the range of study. No sliding induced crystallization was detected by X-Ray analysis. The results of wear characteristics of BMG were also compared with well-known structural materials, AISI 6061-T6 and AISI 304.

Original language	English
Pages (from-to)	1251-1253
Number of pages	3
Journal	Intermetallics
Volume	18
Issue number	6
DOIs	https://doi.org/10.1016/j.intermet.2010.02.003
Publication status	Published - Jun 2010

Keywords

B. Glasses, metallic
B. Surface properties
B. Tribological properties
G. Wear-resistant applications

Access to Document

10.1016/j.intermet.2010.02.003

Cite this

@article{1b8fe2d60efc44858e2459959e049570,

title = "Sliding tribological characteristics of Zr-based bulk metallic glass under lubricated conditions",

abstract = "This paper presents the effect of lubricant, SAE EP 90, on tribological properties of Zr-based bulk metallic glass. The coefficient of friction and wear rate values were evaluated for the wide range of applied normal loads (5-40 N) and contact sliding speeds (0.15-1.60 m/s). Wear and friction properties of tribolayers were strongly affected by both parameters throughout the study. Overall average coefficient of friction values were less than 0.1 in the range of study. No sliding induced crystallization was detected by X-Ray analysis. The results of wear characteristics of BMG were also compared with well-known structural materials, AISI 6061-T6 and AISI 304.",

keywords = "B. Glasses, metallic, B. Surface properties, B. Tribological properties, G. Wear-resistant applications",

author = "Mustafa Bakkal",

year = "2010",

month = jun,

doi = "10.1016/j.intermet.2010.02.003",

language = "English",

volume = "18",

pages = "1251--1253",

journal = "Intermetallics",

issn = "0966-9795",

publisher = "Elsevier Ltd",

number = "6",

}

TY - JOUR

T1 - Sliding tribological characteristics of Zr-based bulk metallic glass under lubricated conditions

AU - Bakkal, Mustafa

PY - 2010/6

Y1 - 2010/6

N2 - This paper presents the effect of lubricant, SAE EP 90, on tribological properties of Zr-based bulk metallic glass. The coefficient of friction and wear rate values were evaluated for the wide range of applied normal loads (5-40 N) and contact sliding speeds (0.15-1.60 m/s). Wear and friction properties of tribolayers were strongly affected by both parameters throughout the study. Overall average coefficient of friction values were less than 0.1 in the range of study. No sliding induced crystallization was detected by X-Ray analysis. The results of wear characteristics of BMG were also compared with well-known structural materials, AISI 6061-T6 and AISI 304.

AB - This paper presents the effect of lubricant, SAE EP 90, on tribological properties of Zr-based bulk metallic glass. The coefficient of friction and wear rate values were evaluated for the wide range of applied normal loads (5-40 N) and contact sliding speeds (0.15-1.60 m/s). Wear and friction properties of tribolayers were strongly affected by both parameters throughout the study. Overall average coefficient of friction values were less than 0.1 in the range of study. No sliding induced crystallization was detected by X-Ray analysis. The results of wear characteristics of BMG were also compared with well-known structural materials, AISI 6061-T6 and AISI 304.

KW - B. Glasses, metallic

KW - B. Surface properties

KW - B. Tribological properties

KW - G. Wear-resistant applications

UR - http://www.scopus.com/inward/record.url?scp=77951097683&partnerID=8YFLogxK

U2 - 10.1016/j.intermet.2010.02.003

DO - 10.1016/j.intermet.2010.02.003

M3 - Article

AN - SCOPUS:77951097683

SN - 0966-9795

VL - 18

SP - 1251

EP - 1253

JO - Intermetallics

JF - Intermetallics

IS - 6

ER -

Sliding tribological characteristics of Zr-based bulk metallic glass under lubricated conditions

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this