On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools

Timothy C. O'Connell; Philip T. Krein; Murat Yilmaz; Andy Friedl

doi:10.1109/COMPEL.2008.4634677

On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools

Timothy C. O'Connell
, Philip T. Krein
, Murat Yilmaz
, Andy Friedl

University of Illinois at Urbana-Champaign

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

6 Citations (Scopus)

Abstract

This paper assesses large-scale numerical electric machine field analysis software and its feasibility for incorporation into complex electric drive system design loops. An opportunity to develop improved system design tools that meet the exacting standards of modern electric drive systems without sacrificing performance is identified. Two alternative routes to achieving this are discussed, one based on Moore's Law and the other based on improving, updating, and intelligently combining and implementing in hardware the algorithms used in analysis software. An ideal design tool's required properties are enumerated, and the merits and suitability for incorporation into such a tool of both domain- and boundary-based methods are examined. Finally, a hybrid design strategy is proposed that incorporates several of the analysis methods discussed and attempts to utilize the key strengths of each.

Original language	English
Title of host publication	11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008
DOIs	https://doi.org/10.1109/COMPEL.2008.4634677
Publication status	Published - 2008
Externally published	Yes
Event	11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008 - Zurich, Switzerland Duration: 17 Aug 2008 → 20 Aug 2008

Publication series

Name	11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008

Conference

Conference	11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008
Country/Territory	Switzerland
City	Zurich
Period	17/08/08 → 20/08/08

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1109/COMPEL.2008.4634677

Cite this

O'Connell, T. C., Krein, P. T., Yilmaz, M., & Friedl, A. (2008). On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools. In 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008 Article 4634677 (11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008). https://doi.org/10.1109/COMPEL.2008.4634677

O'Connell, Timothy C. ; Krein, Philip T. ; Yilmaz, Murat et al. / On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools. 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008. 2008. (11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008).

@inproceedings{aabd720e07bb469e8b1da311042a6fb8,

title = "On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools",

abstract = "This paper assesses large-scale numerical electric machine field analysis software and its feasibility for incorporation into complex electric drive system design loops. An opportunity to develop improved system design tools that meet the exacting standards of modern electric drive systems without sacrificing performance is identified. Two alternative routes to achieving this are discussed, one based on Moore's Law and the other based on improving, updating, and intelligently combining and implementing in hardware the algorithms used in analysis software. An ideal design tool's required properties are enumerated, and the merits and suitability for incorporation into such a tool of both domain- and boundary-based methods are examined. Finally, a hybrid design strategy is proposed that incorporates several of the analysis methods discussed and attempts to utilize the key strengths of each.",

author = "O'Connell, \{Timothy C.\} and Krein, \{Philip T.\} and Murat Yilmaz and Andy Friedl",

year = "2008",

doi = "10.1109/COMPEL.2008.4634677",

language = "English",

isbn = "9781424425518",

series = "11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008",

booktitle = "11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008",

note = "11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008 ; Conference date: 17-08-2008 Through 20-08-2008",

}

O'Connell, TC, Krein, PT, Yilmaz, M & Friedl, A 2008, On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools. in 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008., 4634677, 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008, 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008, Zurich, Switzerland, 17/08/08. https://doi.org/10.1109/COMPEL.2008.4634677

On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools. / O'Connell, Timothy C.; Krein, Philip T.; Yilmaz, Murat et al.
11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008. 2008. 4634677 (11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools

AU - O'Connell, Timothy C.

AU - Krein, Philip T.

AU - Yilmaz, Murat

AU - Friedl, Andy

PY - 2008

Y1 - 2008

N2 - This paper assesses large-scale numerical electric machine field analysis software and its feasibility for incorporation into complex electric drive system design loops. An opportunity to develop improved system design tools that meet the exacting standards of modern electric drive systems without sacrificing performance is identified. Two alternative routes to achieving this are discussed, one based on Moore's Law and the other based on improving, updating, and intelligently combining and implementing in hardware the algorithms used in analysis software. An ideal design tool's required properties are enumerated, and the merits and suitability for incorporation into such a tool of both domain- and boundary-based methods are examined. Finally, a hybrid design strategy is proposed that incorporates several of the analysis methods discussed and attempts to utilize the key strengths of each.

AB - This paper assesses large-scale numerical electric machine field analysis software and its feasibility for incorporation into complex electric drive system design loops. An opportunity to develop improved system design tools that meet the exacting standards of modern electric drive systems without sacrificing performance is identified. Two alternative routes to achieving this are discussed, one based on Moore's Law and the other based on improving, updating, and intelligently combining and implementing in hardware the algorithms used in analysis software. An ideal design tool's required properties are enumerated, and the merits and suitability for incorporation into such a tool of both domain- and boundary-based methods are examined. Finally, a hybrid design strategy is proposed that incorporates several of the analysis methods discussed and attempts to utilize the key strengths of each.

UR - https://www.scopus.com/pages/publications/56649100885

U2 - 10.1109/COMPEL.2008.4634677

DO - 10.1109/COMPEL.2008.4634677

M3 - Conference contribution

AN - SCOPUS:56649100885

SN - 9781424425518

T3 - 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008

BT - 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008

T2 - 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008

Y2 - 17 August 2008 through 20 August 2008

ER -

O'Connell TC, Krein PT, Yilmaz M, Friedl A. On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools. In 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008. 2008. 4634677. (11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008). doi: 10.1109/COMPEL.2008.4634677

On the feasibility of using large-scale numerical electric machine field analysis software in complex electric drive system design tools

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this