MATLAB function based approach to FOC of PMSM drive

Omer Cihan Kivanc; Salih Baris Ozturk

doi:10.5013/IJSSST.a.17.33.02

MATLAB function based approach to FOC of PMSM drive

Omer Cihan Kivanc, Salih Baris Ozturk

Okan University

Research output: Contribution to journal › Article › peer-review

Abstract

In this study, modeling and simulation of a speed sensor driven field-oriented control (FOC) of a permanent magnet synchronous motor (PMSM) drive is developed by using MATLAB Function blocks in MATLAB/Simulink. This method allows easier algorithm and software development stages for experimental studies compared to the classical block diagram approach. The superiority of the method over commonly used “Code Generation” tools is also emphasized. First, a MATLAB/Simulink model of the FOC of PMSM drive is developed by using MATLAB programming in MATLAB Functions similar to C coding techniques. The results of the simulation are presented. Then, the MATLAB programming based codes developed in simulation are implemented in a TMS320F28335 floating-point MCU by using C programming language and the experimental results are obtained. Finally, the results of the simulation and experiments are compared.

Original language	English
Pages (from-to)	2.1-2.8
Journal	International Journal of Simulation: Systems, Science and Technology
Volume	17
Issue number	33
DOIs	https://doi.org/10.5013/IJSSST.a.17.33.02
Publication status	Published - 2016
Externally published	Yes

Bibliographical note

Publisher Copyright:
© 2016, UK Simulation Society. All rights reserved.

Keywords

AC motor drive
Digital motor control
DMC
Embedded coder
Field-oriented control
FOC
Modeling
Permanent magnet synchronous motor
PMSM
SimPowerSystems
Simulation
Speed control

Access to Document

10.5013/IJSSST.a.17.33.02

Cite this

@article{3794d8ad0a2f439a85e8f4ae07029841,

title = "MATLAB function based approach to FOC of PMSM drive",

abstract = "In this study, modeling and simulation of a speed sensor driven field-oriented control (FOC) of a permanent magnet synchronous motor (PMSM) drive is developed by using MATLAB Function blocks in MATLAB/Simulink. This method allows easier algorithm and software development stages for experimental studies compared to the classical block diagram approach. The superiority of the method over commonly used “Code Generation” tools is also emphasized. First, a MATLAB/Simulink model of the FOC of PMSM drive is developed by using MATLAB programming in MATLAB Functions similar to C coding techniques. The results of the simulation are presented. Then, the MATLAB programming based codes developed in simulation are implemented in a TMS320F28335 floating-point MCU by using C programming language and the experimental results are obtained. Finally, the results of the simulation and experiments are compared.",

keywords = "AC motor drive, Digital motor control, DMC, Embedded coder, Field-oriented control, FOC, Modeling, Permanent magnet synchronous motor, PMSM, SimPowerSystems, Simulation, Speed control",

author = "Kivanc, {Omer Cihan} and Ozturk, {Salih Baris}",

year = "2016",

doi = "10.5013/IJSSST.a.17.33.02",

language = "English",

volume = "17",

pages = "2.1--2.8",

journal = "International Journal of Simulation: Systems, Science and Technology",

issn = "1473-8031",

publisher = "UK Simulation Society",

number = "33",

}

TY - JOUR

T1 - MATLAB function based approach to FOC of PMSM drive

AU - Kivanc, Omer Cihan

AU - Ozturk, Salih Baris

PY - 2016

Y1 - 2016

N2 - In this study, modeling and simulation of a speed sensor driven field-oriented control (FOC) of a permanent magnet synchronous motor (PMSM) drive is developed by using MATLAB Function blocks in MATLAB/Simulink. This method allows easier algorithm and software development stages for experimental studies compared to the classical block diagram approach. The superiority of the method over commonly used “Code Generation” tools is also emphasized. First, a MATLAB/Simulink model of the FOC of PMSM drive is developed by using MATLAB programming in MATLAB Functions similar to C coding techniques. The results of the simulation are presented. Then, the MATLAB programming based codes developed in simulation are implemented in a TMS320F28335 floating-point MCU by using C programming language and the experimental results are obtained. Finally, the results of the simulation and experiments are compared.

AB - In this study, modeling and simulation of a speed sensor driven field-oriented control (FOC) of a permanent magnet synchronous motor (PMSM) drive is developed by using MATLAB Function blocks in MATLAB/Simulink. This method allows easier algorithm and software development stages for experimental studies compared to the classical block diagram approach. The superiority of the method over commonly used “Code Generation” tools is also emphasized. First, a MATLAB/Simulink model of the FOC of PMSM drive is developed by using MATLAB programming in MATLAB Functions similar to C coding techniques. The results of the simulation are presented. Then, the MATLAB programming based codes developed in simulation are implemented in a TMS320F28335 floating-point MCU by using C programming language and the experimental results are obtained. Finally, the results of the simulation and experiments are compared.

KW - AC motor drive

KW - Digital motor control

KW - DMC

KW - Embedded coder

KW - Field-oriented control

KW - FOC

KW - Modeling

KW - Permanent magnet synchronous motor

KW - PMSM

KW - SimPowerSystems

KW - Simulation

KW - Speed control

UR - http://www.scopus.com/inward/record.url?scp=85017113674&partnerID=8YFLogxK

U2 - 10.5013/IJSSST.a.17.33.02

DO - 10.5013/IJSSST.a.17.33.02

M3 - Article

AN - SCOPUS:85017113674

SN - 1473-8031

VL - 17

SP - 2.1-2.8

JO - International Journal of Simulation: Systems, Science and Technology

JF - International Journal of Simulation: Systems, Science and Technology

IS - 33

ER -

MATLAB function based approach to FOC of PMSM drive

Abstract

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this