Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions

Hasan Basri Çelebi; Lütfiye Durak-Ata

doi:10.1109/ELECO.2015.7394614

Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions

Hasan Basri Çelebi, Lütfiye Durak-Ata

Informatics Institute

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Impairments caused by timing jitter are one of the most important performance limiting factors of digital converters while sampling under Nyquist rates. In this paper, the effect of jitter in such cases is shown and a new method to estimate and reconstruct the timing jitter errors is presented. The system model is based on the estimation of jitter times with an annihilating filter and reconstruction of the signal using Slepian functions without the knowledge of input frequencies. It is shown that, a significant improvement on SNR is achieved.

Original language	English
Title of host publication	ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	274-278
Number of pages	5
ISBN (Electronic)	9786050107371
DOIs	https://doi.org/10.1109/ELECO.2015.7394614
Publication status	Published - 28 Jan 2016
Event	9th International Conference on Electrical and Electronics Engineering, ELECO 2015 - Bursa, Turkey Duration: 26 Nov 2015 → 28 Nov 2015

Publication series

Name	ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering

Conference

Conference	9th International Conference on Electrical and Electronics Engineering, ELECO 2015
Country/Territory	Turkey
City	Bursa
Period	26/11/15 → 28/11/15

Bibliographical note

Publisher Copyright:
© 2015 Chamber of Electrical Engineers of Turkey.

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/ELECO.2015.7394614

Cite this

Çelebi, H. B., & Durak-Ata, L. (2016). Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions. In ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering (pp. 274-278). Article 7394614 (ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ELECO.2015.7394614

Çelebi, Hasan Basri ; Durak-Ata, Lütfiye. / Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions. ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 274-278 (ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering).

@inproceedings{9ff678d5b8bd4151bedda9cd10ffc4b0,

title = "Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions",

abstract = "Impairments caused by timing jitter are one of the most important performance limiting factors of digital converters while sampling under Nyquist rates. In this paper, the effect of jitter in such cases is shown and a new method to estimate and reconstruct the timing jitter errors is presented. The system model is based on the estimation of jitter times with an annihilating filter and reconstruction of the signal using Slepian functions without the knowledge of input frequencies. It is shown that, a significant improvement on SNR is achieved.",

author = "{\c C}elebi, {Hasan Basri} and L{\"u}tfiye Durak-Ata",

note = "Publisher Copyright: {\textcopyright} 2015 Chamber of Electrical Engineers of Turkey.; 9th International Conference on Electrical and Electronics Engineering, ELECO 2015 ; Conference date: 26-11-2015 Through 28-11-2015",

year = "2016",

month = jan,

day = "28",

doi = "10.1109/ELECO.2015.7394614",

language = "English",

series = "ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "274--278",

booktitle = "ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering",

address = "United States",

}

Çelebi, HB & Durak-Ata, L 2016, Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions. in ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering., 7394614, ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering, Institute of Electrical and Electronics Engineers Inc., pp. 274-278, 9th International Conference on Electrical and Electronics Engineering, ELECO 2015, Bursa, Turkey, 26/11/15. https://doi.org/10.1109/ELECO.2015.7394614

Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions. / Çelebi, Hasan Basri; Durak-Ata, Lütfiye.
ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering. Institute of Electrical and Electronics Engineers Inc., 2016. p. 274-278 7394614 (ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions

AU - Çelebi, Hasan Basri

AU - Durak-Ata, Lütfiye

PY - 2016/1/28

Y1 - 2016/1/28

N2 - Impairments caused by timing jitter are one of the most important performance limiting factors of digital converters while sampling under Nyquist rates. In this paper, the effect of jitter in such cases is shown and a new method to estimate and reconstruct the timing jitter errors is presented. The system model is based on the estimation of jitter times with an annihilating filter and reconstruction of the signal using Slepian functions without the knowledge of input frequencies. It is shown that, a significant improvement on SNR is achieved.

AB - Impairments caused by timing jitter are one of the most important performance limiting factors of digital converters while sampling under Nyquist rates. In this paper, the effect of jitter in such cases is shown and a new method to estimate and reconstruct the timing jitter errors is presented. The system model is based on the estimation of jitter times with an annihilating filter and reconstruction of the signal using Slepian functions without the knowledge of input frequencies. It is shown that, a significant improvement on SNR is achieved.

UR - http://www.scopus.com/inward/record.url?scp=84963930428&partnerID=8YFLogxK

U2 - 10.1109/ELECO.2015.7394614

DO - 10.1109/ELECO.2015.7394614

M3 - Conference contribution

AN - SCOPUS:84963930428

T3 - ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering

SP - 274

EP - 278

BT - ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 9th International Conference on Electrical and Electronics Engineering, ELECO 2015

Y2 - 26 November 2015 through 28 November 2015

ER -

Çelebi HB, Durak-Ata L. Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions. In ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering. Institute of Electrical and Electronics Engineers Inc. 2016. p. 274-278. 7394614. (ELECO 2015 - 9th International Conference on Electrical and Electronics Engineering). doi: 10.1109/ELECO.2015.7394614

Jitter estimation and mitigation in sub-Nyquist sampling using Slepian functions

Abstract

Publication series

Conference

Bibliographical note

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this