Influence of surface topography on heat transfer in shear-driven liquid films

Mete Budakli, Tatiana Gambaryan-Roisman, Peter Stephan*

*Corresponding author for this work

Research output: Contribution to journalConference articlepeer-review

4 Citations (Scopus)

Abstract

Thin gas-driven liquid films find numerous industrial applications. They are used for fuel preparation in airblast atomizers of modern gas turbines. Strong shear forces at the gas-liquid interface destabilize the liquid-gas interface and lead to development of interfacial waves. In this study, the heat transfer in liquid films driven by turbulent gas flow is investigated experimentally over a wide range of parameters. A liquid film is formed on vertical heated unstructured and micro-structured tubes. The Reynolds number of the gas flow is varied between 104 and 105, and the Reynolds number of the liquid film flow is varied between 80 and 800. Wall heat fluxes up to 30 W/cm2 are applied. The heat transfer coefficient strongly depends on the gas and liquid Reynolds numbers. Using the micro-structured tube leads to a heat transfer enhancement of up to 80 %.

Original languageEnglish
Article number012164
JournalJournal of Physics: Conference Series
Volume395
Issue number1
DOIs
Publication statusPublished - 2012
Externally publishedYes
Event6th European Thermal Sciences Conference, Eurotherm 2012 - Poitiers, France
Duration: 4 Sept 20127 Sept 2012

Fingerprint

Dive into the research topics of 'Influence of surface topography on heat transfer in shear-driven liquid films'. Together they form a unique fingerprint.

Cite this