Influence of ATH Filler on Tracking and Erosion Resistance of HTV Silicone Rubbers under DC Voltages

Cengiz Gur, Mustafa Vehbi Elmas, Halil Ibrahim Uckol, Suat Ilhan

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

This paper presents the investigation of tracking and erosion resistance of high temperature vulcanized (HTV) silicone rubber samples filled with 50 wt% ATH fillers using DC inclined plane tests. Two different types of ATH fillers, namely, precipitated and silane-treated, are used. In this comparative analysis, 2.75 kV for positive DC and 3.5 kV for negative DC are considered. The comparison points for performance assessment for two different fillers are eroded mass, erosion length, erosion depth, and time-to-failure. Leakage current behaviors of the samples are also evaluated.

Original languageEnglish
Title of host publication2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages138-141
Number of pages4
ISBN (Electronic)9786050114379
DOIs
Publication statusPublished - 2021
Event13th International Conference on Electrical and Electronics Engineering, ELECO 2021 - Virtual, Bursa, Turkey
Duration: 25 Nov 202127 Nov 2021

Publication series

Name2021 13th International Conference on Electrical and Electronics Engineering, ELECO 2021

Conference

Conference13th International Conference on Electrical and Electronics Engineering, ELECO 2021
Country/TerritoryTurkey
CityVirtual, Bursa
Period25/11/2127/11/21

Bibliographical note

Publisher Copyright:
© 2021 Chamber of Turkish Electrical Engineers.

Fingerprint

Dive into the research topics of 'Influence of ATH Filler on Tracking and Erosion Resistance of HTV Silicone Rubbers under DC Voltages'. Together they form a unique fingerprint.

Cite this