Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives

S. Kurama; M. Herrmann; H. Mandal

Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives

S. Kurama^*
, M. Herrmann
, H. Mandal

^*Corresponding author for this work

Anadolu University

Research output: Contribution to journal › Conference article › peer-review

2 Citations (Scopus)

Abstract

Two types of Y-α-SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825°C for 3 hrs, another group of samples was held at a lower temperature (1500°C or 1600°C) for 1 hr and then heated up to 1825°C for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated.

Original language	English
Pages (from-to)	1009-1012
Number of pages	4
Journal	Key Engineering Materials
Volume	206-213
Issue number	II
Publication status	Published - 2001
Externally published	Yes
Event	7th Conference and Exhibition of the European Ceramic Society - Brugge, Belgium Duration: 9 Sept 2001 → 13 Sept 2001

Keywords

Additive Content
Grain Morphology
Process Conditions
α-SiAlON

Cite this

@article{2ee0622672054955b77461b19afef2d5,

title = "Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives",

abstract = "Two types of Y-α-SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825°C for 3 hrs, another group of samples was held at a lower temperature (1500°C or 1600°C) for 1 hr and then heated up to 1825°C for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated.",

keywords = "Additive Content, Grain Morphology, Process Conditions, α-SiAlON",

author = "S. Kurama and M. Herrmann and H. Mandal",

year = "2001",

language = "English",

volume = "206-213",

pages = "1009--1012",

journal = "Key Engineering Materials",

issn = "1013-9826",

number = "II",

note = "7th Conference and Exhibition of the European Ceramic Society ; Conference date: 09-09-2001 Through 13-09-2001",

}

TY - JOUR

T1 - Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives

AU - Kurama, S.

AU - Herrmann, M.

AU - Mandal, H.

PY - 2001

Y1 - 2001

N2 - Two types of Y-α-SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825°C for 3 hrs, another group of samples was held at a lower temperature (1500°C or 1600°C) for 1 hr and then heated up to 1825°C for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated.

AB - Two types of Y-α-SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825°C for 3 hrs, another group of samples was held at a lower temperature (1500°C or 1600°C) for 1 hr and then heated up to 1825°C for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated.

KW - Additive Content

KW - Grain Morphology

KW - Process Conditions

KW - α-SiAlON

UR - https://www.scopus.com/pages/publications/0034777119

M3 - Conference article

AN - SCOPUS:0034777119

SN - 1013-9826

VL - 206-213

SP - 1009

EP - 1012

JO - Key Engineering Materials

JF - Key Engineering Materials

IS - II

T2 - 7th Conference and Exhibition of the European Ceramic Society

Y2 - 9 September 2001 through 13 September 2001

ER -

Improvement of elongated α-SiAlON ceramics by variation of the processing conditions and amounts of additives

Abstract

Keywords

Other files and links

Fingerprint

Cite this