Abstract
The study provided a critical appraisal of the extended aeration process as a single-sludge system for nitrogen removal, emphasizing its inherent deficiencies. For this purpose, the system was designed first using the prescribed procedure in the German practice, ATV A-131. The design used the basic data reported in different studies related to conventional characterization and chemical oxygen demand (COD) fractionation defining the biodegradation characteristics of domestic wastewater. A critical appraisal of the design was made with emphasis on the fate of biodegradable COD and oxidized nitrogen in the anoxic phase by process modeling and evaluation. The results obtained were evaluated using basic stoichiometry and mass balance for major nitrogen fractions. The A-131 design based on a total sludge age of 20 days defined a system with a hydraulic residence time of 1.2 days where half of the volume was operated under anoxic conditions; the effluent nitrate concentration was reduced to 8.3 mg N/L with an internal recycle (nitrate) ratio of 4.9. Model evaluation of the prescribed design indicated that oxidized nitrogen was totally consumed within the first 25-30 % portion of the anoxic volume. The remaining volume was forced to operate under anaerobic conditions, where no appreciable endogenous decay would occur. ATV A-131 procedure, relying on empirical coefficients and expressions, was neither consistent with process stoichiometry nor justifiable by modeling. Evaluations based on modeling and process stoichiometry revealed significant inherent weaknesses of extended aeration for providing a sustainable basis for nitrogen removal.
Original language | English |
---|---|
Article number | 405 |
Journal | Water, Air, and Soil Pollution |
Volume | 226 |
Issue number | 11 |
DOIs | |
Publication status | Published - 1 Nov 2015 |
Bibliographical note
Publisher Copyright:© 2015 Springer International Publishing Switzerland.
Keywords
- Aerobic stabilization
- ATV A-131
- Denitrification stoichiometry
- Nitrogen removal
- Process design
- Process modeling