First-order allpass filter realisation using a modified third generation current conveyor

S. Özoǧuz; H. Kuntman; O. Çiçekoǧlu

doi:10.1109/OCCSC.2002.1029046

First-order allpass filter realisation using a modified third generation current conveyor

S. Özoǧuz, H. Kuntman, O. Çiçekoǧlu

Department of Electronics and Communication Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

A new first-order allpass filter configuration using a modified third-generation current conveyor is presented. In order to illustrate the usefulness of the proposed circuit, a very high-Q bandpass filter is designed using the proposed allpass sections. The main parameters of the resulting high-Q bandpass filter, i.e. the center frequency and pole-Q can be independently adjusted by changing the values of grounded resistors. SPICE simulation results verifying theoretical analyses are also included.

Original language	English
Title of host publication	ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings
Editors	A. S. Korotkov
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	66-69
Number of pages	4
ISBN (Electronic)	5742202601, 9785742202608
DOIs	https://doi.org/10.1109/OCCSC.2002.1029046
Publication status	Published - 2002
Event	1st IEEE International Conference on Circuits and Systems for Communications, ICCSC 2002 - St.Petersburg, Russian Federation Duration: 26 Jun 2002 → 28 Jun 2002

Publication series

Name	ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings
Volume	2002-June

Conference

Conference	1st IEEE International Conference on Circuits and Systems for Communications, ICCSC 2002
Country/Territory	Russian Federation
City	St.Petersburg
Period	26/06/02 → 28/06/02

Bibliographical note

Publisher Copyright:
© 2002 St. Petersburg State Poly Univ.

Access to Document

10.1109/OCCSC.2002.1029046

Cite this

Özoǧuz, S., Kuntman, H., & Çiçekoǧlu, O. (2002). First-order allpass filter realisation using a modified third generation current conveyor. In A. S. Korotkov (Ed.), ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings (pp. 66-69). Article 1029046 (ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings; Vol. 2002-June). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/OCCSC.2002.1029046

Özoǧuz, S. ; Kuntman, H. ; Çiçekoǧlu, O. / First-order allpass filter realisation using a modified third generation current conveyor. ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings. editor / A. S. Korotkov. Institute of Electrical and Electronics Engineers Inc., 2002. pp. 66-69 (ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings).

@inproceedings{7270d62c3e7c4b3aa4b69714765aa972,

title = "First-order allpass filter realisation using a modified third generation current conveyor",

abstract = "A new first-order allpass filter configuration using a modified third-generation current conveyor is presented. In order to illustrate the usefulness of the proposed circuit, a very high-Q bandpass filter is designed using the proposed allpass sections. The main parameters of the resulting high-Q bandpass filter, i.e. the center frequency and pole-Q can be independently adjusted by changing the values of grounded resistors. SPICE simulation results verifying theoretical analyses are also included.",

author = "S. {\"O}zoǧuz and H. Kuntman and O. {\c C}i{\c c}ekoǧlu",

note = "Publisher Copyright: {\textcopyright} 2002 St. Petersburg State Poly Univ.; 1st IEEE International Conference on Circuits and Systems for Communications, ICCSC 2002 ; Conference date: 26-06-2002 Through 28-06-2002",

year = "2002",

doi = "10.1109/OCCSC.2002.1029046",

language = "English",

series = "ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "66--69",

editor = "Korotkov, {A. S.}",

booktitle = "ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings",

address = "United States",

}

Özoǧuz, S, Kuntman, H & Çiçekoǧlu, O 2002, First-order allpass filter realisation using a modified third generation current conveyor. in AS Korotkov (ed.), ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings., 1029046, ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings, vol. 2002-June, Institute of Electrical and Electronics Engineers Inc., pp. 66-69, 1st IEEE International Conference on Circuits and Systems for Communications, ICCSC 2002, St.Petersburg, Russian Federation, 26/06/02. https://doi.org/10.1109/OCCSC.2002.1029046

First-order allpass filter realisation using a modified third generation current conveyor. / Özoǧuz, S.; Kuntman, H.; Çiçekoǧlu, O.
ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings. ed. / A. S. Korotkov. Institute of Electrical and Electronics Engineers Inc., 2002. p. 66-69 1029046 (ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings; Vol. 2002-June).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - First-order allpass filter realisation using a modified third generation current conveyor

AU - Özoǧuz, S.

AU - Kuntman, H.

AU - Çiçekoǧlu, O.

PY - 2002

Y1 - 2002

N2 - A new first-order allpass filter configuration using a modified third-generation current conveyor is presented. In order to illustrate the usefulness of the proposed circuit, a very high-Q bandpass filter is designed using the proposed allpass sections. The main parameters of the resulting high-Q bandpass filter, i.e. the center frequency and pole-Q can be independently adjusted by changing the values of grounded resistors. SPICE simulation results verifying theoretical analyses are also included.

AB - A new first-order allpass filter configuration using a modified third-generation current conveyor is presented. In order to illustrate the usefulness of the proposed circuit, a very high-Q bandpass filter is designed using the proposed allpass sections. The main parameters of the resulting high-Q bandpass filter, i.e. the center frequency and pole-Q can be independently adjusted by changing the values of grounded resistors. SPICE simulation results verifying theoretical analyses are also included.

UR - http://www.scopus.com/inward/record.url?scp=84990911119&partnerID=8YFLogxK

U2 - 10.1109/OCCSC.2002.1029046

DO - 10.1109/OCCSC.2002.1029046

M3 - Conference contribution

AN - SCOPUS:84990911119

T3 - ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings

SP - 66

EP - 69

BT - ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings

A2 - Korotkov, A. S.

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st IEEE International Conference on Circuits and Systems for Communications, ICCSC 2002

Y2 - 26 June 2002 through 28 June 2002

ER -

Özoǧuz S, Kuntman H, Çiçekoǧlu O. First-order allpass filter realisation using a modified third generation current conveyor. In Korotkov AS, editor, ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings. Institute of Electrical and Electronics Engineers Inc. 2002. p. 66-69. 1029046. (ICCSC 2002 - 1st IEEE International Conference on Circuits and Systems for Communications, Proceedings). doi: 10.1109/OCCSC.2002.1029046

First-order allpass filter realisation using a modified third generation current conveyor

Abstract

Publication series

Conference

Bibliographical note

Access to Document

Other files and links

Fingerprint

Cite this