Experimental study on early-strength of cemented paste backfill

A. Bascetin; S. Tuylu; H. Eker; D. Adiguzel; Y. Baktarhan

Experimental study on early-strength of cemented paste backfill

A. Bascetin, S. Tuylu, H. Eker, D. Adiguzel, Y. Baktarhan

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The purpose of this study is improving the strength of the cemented paste backfill. Also the effect of blast furnace slag (BFS) was investigated on short - term mechanical properties of CPB. In this study, CPB samples were prepared by 9% portland cement and also 25%, 50% and 75% of the cement were replaced with BFS. The paste materials prepared according to the value of 180 mm slump were cast into cylinder molds. The uniaxial compressive strength (UCS) and Ultrasonic P-Wave Velocities tests were performed. The maximum values of UCS 0.80, 1.70 and 3.03 MPa respectively at 3, 7 and 14 curing period were obtained from 25 wt% BFS added samples. 25%wt. BFS showed a strength of 1.79 times in the 7 days cure period and 2 times in the 14 day cure period according to the reference cemented samples. On the contrary, substitution of 50 and 75 wt.% BFS were reduced strength of CPB samples. Ultrasonic pulse velocity of cemented paste backfill showed similar trend with UCS. But, substitution of 25, 50 and 75 wt.% BFS were below the values of reference samples. The maximum values of UCS are 25% additive BFS. This situation directly affects the cost of CPB due to reduces the cement ratio.

Original language	English
Title of host publication	2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference
Publisher	Society for Mining, Metallurgy and Exploration
ISBN (Electronic)	9781510884663
Publication status	Published - 2019
Externally published	Yes
Event	2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference - Denver, United States Duration: 24 Feb 2019 → 27 Feb 2019

Publication series

Name	2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference

Conference

Conference	2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference
Country/Territory	United States
City	Denver
Period	24/02/19 → 27/02/19

Bibliographical note

Publisher Copyright:
Copyright © 2019 by SME.

Funding

This study was funded by number FDK-2018-24707. This study was funded by Istanbul University with the project number FDK-2018-24707.

Funders	Funder number
Istanbul Üniversitesi	FDK-2018-24707

Cite this

@inproceedings{3cef9fac8cf245658d2efbcb24f44231,

title = "Experimental study on early-strength of cemented paste backfill",

abstract = "The purpose of this study is improving the strength of the cemented paste backfill. Also the effect of blast furnace slag (BFS) was investigated on short - term mechanical properties of CPB. In this study, CPB samples were prepared by 9\% portland cement and also 25\%, 50\% and 75\% of the cement were replaced with BFS. The paste materials prepared according to the value of 180 mm slump were cast into cylinder molds. The uniaxial compressive strength (UCS) and Ultrasonic P-Wave Velocities tests were performed. The maximum values of UCS 0.80, 1.70 and 3.03 MPa respectively at 3, 7 and 14 curing period were obtained from 25 wt\% BFS added samples. 25\%wt. BFS showed a strength of 1.79 times in the 7 days cure period and 2 times in the 14 day cure period according to the reference cemented samples. On the contrary, substitution of 50 and 75 wt.\% BFS were reduced strength of CPB samples. Ultrasonic pulse velocity of cemented paste backfill showed similar trend with UCS. But, substitution of 25, 50 and 75 wt.\% BFS were below the values of reference samples. The maximum values of UCS are 25\% additive BFS. This situation directly affects the cost of CPB due to reduces the cement ratio.",

author = "A. Bascetin and S. Tuylu and H. Eker and D. Adiguzel and Y. Baktarhan",

note = "Publisher Copyright: Copyright {\textcopyright} 2019 by SME.; 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference ; Conference date: 24-02-2019 Through 27-02-2019",

year = "2019",

language = "English",

series = "2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference",

publisher = "Society for Mining, Metallurgy and Exploration",

booktitle = "2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference",

address = "United States",

}

Bascetin, A, Tuylu, S, Eker, H, Adiguzel, D & Baktarhan, Y 2019, Experimental study on early-strength of cemented paste backfill. in 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference. 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference, Society for Mining, Metallurgy and Exploration, 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference, Denver, United States, 24/02/19.

Experimental study on early-strength of cemented paste backfill. / Bascetin, A.; Tuylu, S.; Eker, H. et al.
2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference. Society for Mining, Metallurgy and Exploration, 2019. (2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Experimental study on early-strength of cemented paste backfill

AU - Bascetin, A.

AU - Tuylu, S.

AU - Eker, H.

AU - Adiguzel, D.

AU - Baktarhan, Y.

PY - 2019

Y1 - 2019

N2 - The purpose of this study is improving the strength of the cemented paste backfill. Also the effect of blast furnace slag (BFS) was investigated on short - term mechanical properties of CPB. In this study, CPB samples were prepared by 9% portland cement and also 25%, 50% and 75% of the cement were replaced with BFS. The paste materials prepared according to the value of 180 mm slump were cast into cylinder molds. The uniaxial compressive strength (UCS) and Ultrasonic P-Wave Velocities tests were performed. The maximum values of UCS 0.80, 1.70 and 3.03 MPa respectively at 3, 7 and 14 curing period were obtained from 25 wt% BFS added samples. 25%wt. BFS showed a strength of 1.79 times in the 7 days cure period and 2 times in the 14 day cure period according to the reference cemented samples. On the contrary, substitution of 50 and 75 wt.% BFS were reduced strength of CPB samples. Ultrasonic pulse velocity of cemented paste backfill showed similar trend with UCS. But, substitution of 25, 50 and 75 wt.% BFS were below the values of reference samples. The maximum values of UCS are 25% additive BFS. This situation directly affects the cost of CPB due to reduces the cement ratio.

AB - The purpose of this study is improving the strength of the cemented paste backfill. Also the effect of blast furnace slag (BFS) was investigated on short - term mechanical properties of CPB. In this study, CPB samples were prepared by 9% portland cement and also 25%, 50% and 75% of the cement were replaced with BFS. The paste materials prepared according to the value of 180 mm slump were cast into cylinder molds. The uniaxial compressive strength (UCS) and Ultrasonic P-Wave Velocities tests were performed. The maximum values of UCS 0.80, 1.70 and 3.03 MPa respectively at 3, 7 and 14 curing period were obtained from 25 wt% BFS added samples. 25%wt. BFS showed a strength of 1.79 times in the 7 days cure period and 2 times in the 14 day cure period according to the reference cemented samples. On the contrary, substitution of 50 and 75 wt.% BFS were reduced strength of CPB samples. Ultrasonic pulse velocity of cemented paste backfill showed similar trend with UCS. But, substitution of 25, 50 and 75 wt.% BFS were below the values of reference samples. The maximum values of UCS are 25% additive BFS. This situation directly affects the cost of CPB due to reduces the cement ratio.

UR - https://www.scopus.com/pages/publications/85084017460

M3 - Conference contribution

AN - SCOPUS:85084017460

T3 - 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference

BT - 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference

PB - Society for Mining, Metallurgy and Exploration

T2 - 2019 SME Annual Conference and Expo and CMA 121st National Western Mining Conference

Y2 - 24 February 2019 through 27 February 2019

ER -

Experimental study on early-strength of cemented paste backfill

Abstract

Publication series

Conference

Bibliographical note

Funding

Other files and links

Fingerprint

Cite this