Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard

I. Mehmet Palabiyik; A. Orhan Yavuz; Zafer Gemici; Isminur Gökgöz

doi:10.1115/ESDA2012-82070

Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard

I. Mehmet Palabiyik^*
, A. Orhan Yavuz
, Zafer Gemici
, Isminur Gökgöz

^*Corresponding author for this work

Department of Mechanical Engineering

Istanbul Technical University
Yildiz Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

The parallel plate load test is used to measure "pipe stiffness" for HDPE pipe. Pipe stiffness is employed as a measure of pipe resistance to bending deformation as well as a quality control index for the manufacturing process. This work presents the results of a series of parallel plate tests conducted on profiled HDPE plastic pipes to determine ring stiffness values. During the study, all pipe samples were tested according to the DIN 16961 2:2010-03 standard. The nominal inside diameters of the test pipes were selected 500 and 600mm. These pipes compressed radially a constant load during 24 hours and deflection were measured by a comparator. Then experimental ring stiffness values were calculated by using these data.

Original language	English
Title of host publication	ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012
Pages	417-420
Number of pages	4
DOIs	https://doi.org/10.1115/ESDA2012-82070
Publication status	Published - 2012
Event	ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012 - Nantes, France Duration: 2 Jul 2012 → 4 Jul 2012

Publication series

Name	ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012
Volume	1

Conference

Conference	ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012
Country/Territory	France
City	Nantes
Period	2/07/12 → 4/07/12

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1115/ESDA2012-82070

Cite this

Palabiyik, I. M., Yavuz, A. O., Gemici, Z., & Gökgöz, I. (2012). Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard. In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012 (pp. 417-420). (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012; Vol. 1). https://doi.org/10.1115/ESDA2012-82070

Palabiyik, I. Mehmet ; Yavuz, A. Orhan ; Gemici, Zafer et al. / Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard. ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. 2012. pp. 417-420 (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012).

@inproceedings{43b6736a62ba4cb185ef86eafa362dde,

title = "Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard",

abstract = "The parallel plate load test is used to measure {"}pipe stiffness{"} for HDPE pipe. Pipe stiffness is employed as a measure of pipe resistance to bending deformation as well as a quality control index for the manufacturing process. This work presents the results of a series of parallel plate tests conducted on profiled HDPE plastic pipes to determine ring stiffness values. During the study, all pipe samples were tested according to the DIN 16961 2:2010-03 standard. The nominal inside diameters of the test pipes were selected 500 and 600mm. These pipes compressed radially a constant load during 24 hours and deflection were measured by a comparator. Then experimental ring stiffness values were calculated by using these data.",

author = "Palabiyik, \{I. Mehmet\} and Yavuz, \{A. Orhan\} and Zafer Gemici and Isminur G{\"o}kg{\"o}z",

year = "2012",

doi = "10.1115/ESDA2012-82070",

language = "English",

isbn = "9780791844847",

series = "ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012",

pages = "417--420",

booktitle = "ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012",

note = "ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012 ; Conference date: 02-07-2012 Through 04-07-2012",

}

Palabiyik, IM, Yavuz, AO, Gemici, Z & Gökgöz, I 2012, Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard. in ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, vol. 1, pp. 417-420, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012, Nantes, France, 2/07/12. https://doi.org/10.1115/ESDA2012-82070

Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard. / Palabiyik, I. Mehmet; Yavuz, A. Orhan; Gemici, Zafer et al.
ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. 2012. p. 417-420 (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard

AU - Palabiyik, I. Mehmet

AU - Yavuz, A. Orhan

AU - Gemici, Zafer

AU - Gökgöz, Isminur

PY - 2012

Y1 - 2012

N2 - The parallel plate load test is used to measure "pipe stiffness" for HDPE pipe. Pipe stiffness is employed as a measure of pipe resistance to bending deformation as well as a quality control index for the manufacturing process. This work presents the results of a series of parallel plate tests conducted on profiled HDPE plastic pipes to determine ring stiffness values. During the study, all pipe samples were tested according to the DIN 16961 2:2010-03 standard. The nominal inside diameters of the test pipes were selected 500 and 600mm. These pipes compressed radially a constant load during 24 hours and deflection were measured by a comparator. Then experimental ring stiffness values were calculated by using these data.

AB - The parallel plate load test is used to measure "pipe stiffness" for HDPE pipe. Pipe stiffness is employed as a measure of pipe resistance to bending deformation as well as a quality control index for the manufacturing process. This work presents the results of a series of parallel plate tests conducted on profiled HDPE plastic pipes to determine ring stiffness values. During the study, all pipe samples were tested according to the DIN 16961 2:2010-03 standard. The nominal inside diameters of the test pipes were selected 500 and 600mm. These pipes compressed radially a constant load during 24 hours and deflection were measured by a comparator. Then experimental ring stiffness values were calculated by using these data.

UR - https://www.scopus.com/pages/publications/84883878653

U2 - 10.1115/ESDA2012-82070

DO - 10.1115/ESDA2012-82070

M3 - Conference contribution

AN - SCOPUS:84883878653

SN - 9780791844847

T3 - ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012

SP - 417

EP - 420

BT - ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012

T2 - ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012

Y2 - 2 July 2012 through 4 July 2012

ER -

Palabiyik IM, Yavuz AO, Gemici Z, Gökgöz I. Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard. In ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012. 2012. p. 417-420. (ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2012). doi: 10.1115/ESDA2012-82070

Experimental analysis of ring stiffnesses of pipes, made of high density polyethylene, due to DIN 16961-2:2010-03 standard

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this