EsTRACE—Es-Layer TRAnsient Cloud Explorer: PlanarSat Mission Concept and Early-Phase Design (Bid, CoDR, PDR) for Sporadic-E Sensing

Research output: Contribution to journalArticlepeer-review

Abstract

Sporadic-E (Es) layers can strongly perturb HF/VHF propagation and create intermittent interference, motivating higher-revisit monitoring at the frequencies most affected. EsTRACE (Es-layer TRAnsient Cloud Explorer) is a PlanarSat mission concept that transmits sequential beacons in the 28/50 MHz amateur bands using FT4 (weak-signal digital) and CW (continuous wave) waveforms and leverages distributed amateur receiver networks for near-real-time SNR mapping. This paper documents the early-phase spacecraft design from the Bid/proposal phase (Bid), through the Conceptual Design Review (CoDR), to the Preliminary Design Review (PDR), using a power-first sizing loop that couples link-budget closure to duty cycle and solar-array area under a free-tumbling, batteryless constraint. The analysis supports conceptual feasibility of the architecture under stated antenna and ground-segment assumptions; on-orbit demonstration and measured RF/antenna characterization are identified as required future validation steps.

Original languageEnglish
Article number425
JournalApplied Sciences (Switzerland)
Volume16
Issue number1
DOIs
Publication statusPublished - Jan 2026

Bibliographical note

Publisher Copyright:
© 2025 by the authors.

Keywords

  • Attosat
  • ChipSat
  • Femtosat
  • PlanarSat
  • small satellite
  • space weather
  • sporadic E
  • systems engineering

Fingerprint

Dive into the research topics of 'EsTRACE—Es-Layer TRAnsient Cloud Explorer: PlanarSat Mission Concept and Early-Phase Design (Bid, CoDR, PDR) for Sporadic-E Sensing'. Together they form a unique fingerprint.

Cite this