Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

Emre Avunduk; Hanifi Copur

doi:10.1016/j.tust.2017.09.016

Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

Emre Avunduk^*, Hanifi Copur

^*Corresponding author for this work

Department of Mining Engineering

Research output: Contribution to journal › Article › peer-review

55 Citations (Scopus)

Abstract

This study was conducted in order to determine the effects of soil properties on the excavation performance of an earth pressure balance tunnel boring machine (EPB TBM) used in the Istanbul Ayvali Waste Water Tunnel Project in the development of empirical performance prediction models. The tunnel alignment was divided into three general sections in terms of geological and geotechnical conditions. Soil samples were collected from 14 different locations along these sections of approximately 60 segment rings, and subjected to laboratory tests in order to determine the particle size distribution, natural water content, consistency limits (liquid limit, plastic limit, plasticity index, and consistency index), vane shear strength, fall cone penetration depth, unified soil classification, and clogging potential. The field performance data were obtained from the EPB TBM data logger, which operated in open mode without any face pressure being applied. Data analysis was carried out by statistically linking the net cutterhead torque, TBM thrust force, instantaneous cutting rate, and field-specific energy with the geotechnical properties of the excavated clayey soil by using single and linear multi-variable regression methods. The results indicate that, while the performance parameters are similar for the silty sand and lean (low plasticity) clay, the cutterhead torque and field-specific energy are higher, and the thrust and instantaneous cutting rate are lower, for high plasticity clays. The vane shear strength and consistency index may be used for predicting the cutterhead torque, fall cone penetration depth for the thrust force, plastic limit for the instantaneous cutting rate, and plastic limit and plasticity index, as well as the consistency index, for field-specific energy predictions. Additional studies are required to provide more reliable and generalized prediction models, by increasing the number of laboratory and field tests for different soil types and performance data for different EPB TBMs.

Original language	English
Pages (from-to)	340-353
Number of pages	14
Journal	Tunnelling and Underground Space Technology
Volume	71
DOIs	https://doi.org/10.1016/j.tust.2017.09.016
Publication status	Published - Jan 2018

Bibliographical note

Publisher Copyright:
© 2017 Elsevier Ltd

Funding

This study forms part of the unpublished PhD thesis by Emre Avunduk. The authors are grateful to the Scientific and Technological Research Council of Turkey (TUBITAK) for their valuable support (Project No: 213M487), and the Istanbul Technical University (ITU) Research Foundation (BAPSO Project No: 37793). The authors would like to thank Dr. Nuray Tokgoz for assisting us with the laser diffraction tests. Furthermore, Mr. Sahand Tolouei, Mr. Muammer Cinar, and Mr. Sener Kahya are thanked for their assistance with the field studies. We also thank the representatives of the Istanbul Water and Sewage Administration (ISKI) and Eferay-Silahtaroglu Construction JV for permitting us to conduct research in the Ayvali Waste Water Tunnel.

Funders	Funder number
TUBITAK	213M487
Türkiye Bilimsel ve Teknolojik Araştirma Kurumu
Istanbul Teknik Üniversitesi	37793

Keywords

EPB TBM
Fine-grained soils
Instantaneous cutting rate
Performance prediction
Specific energy

Access to Document

10.1016/j.tust.2017.09.016

Cite this

@article{1fcea5cec2c441f695133854647aadba,

title = "Empirical modeling for predicting excavation performance of EPB TBM based on soil properties",

abstract = "This study was conducted in order to determine the effects of soil properties on the excavation performance of an earth pressure balance tunnel boring machine (EPB TBM) used in the Istanbul Ayvali Waste Water Tunnel Project in the development of empirical performance prediction models. The tunnel alignment was divided into three general sections in terms of geological and geotechnical conditions. Soil samples were collected from 14 different locations along these sections of approximately 60 segment rings, and subjected to laboratory tests in order to determine the particle size distribution, natural water content, consistency limits (liquid limit, plastic limit, plasticity index, and consistency index), vane shear strength, fall cone penetration depth, unified soil classification, and clogging potential. The field performance data were obtained from the EPB TBM data logger, which operated in open mode without any face pressure being applied. Data analysis was carried out by statistically linking the net cutterhead torque, TBM thrust force, instantaneous cutting rate, and field-specific energy with the geotechnical properties of the excavated clayey soil by using single and linear multi-variable regression methods. The results indicate that, while the performance parameters are similar for the silty sand and lean (low plasticity) clay, the cutterhead torque and field-specific energy are higher, and the thrust and instantaneous cutting rate are lower, for high plasticity clays. The vane shear strength and consistency index may be used for predicting the cutterhead torque, fall cone penetration depth for the thrust force, plastic limit for the instantaneous cutting rate, and plastic limit and plasticity index, as well as the consistency index, for field-specific energy predictions. Additional studies are required to provide more reliable and generalized prediction models, by increasing the number of laboratory and field tests for different soil types and performance data for different EPB TBMs.",

keywords = "EPB TBM, Fine-grained soils, Instantaneous cutting rate, Performance prediction, Specific energy",

author = "Emre Avunduk and Hanifi Copur",

note = "Publisher Copyright: {\textcopyright} 2017 Elsevier Ltd",

year = "2018",

month = jan,

doi = "10.1016/j.tust.2017.09.016",

language = "English",

volume = "71",

pages = "340--353",

journal = "Tunnelling and Underground Space Technology",

issn = "0886-7798",

publisher = "Elsevier Ltd",

}

TY - JOUR

T1 - Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

AU - Avunduk, Emre

AU - Copur, Hanifi

PY - 2018/1

Y1 - 2018/1

N2 - This study was conducted in order to determine the effects of soil properties on the excavation performance of an earth pressure balance tunnel boring machine (EPB TBM) used in the Istanbul Ayvali Waste Water Tunnel Project in the development of empirical performance prediction models. The tunnel alignment was divided into three general sections in terms of geological and geotechnical conditions. Soil samples were collected from 14 different locations along these sections of approximately 60 segment rings, and subjected to laboratory tests in order to determine the particle size distribution, natural water content, consistency limits (liquid limit, plastic limit, plasticity index, and consistency index), vane shear strength, fall cone penetration depth, unified soil classification, and clogging potential. The field performance data were obtained from the EPB TBM data logger, which operated in open mode without any face pressure being applied. Data analysis was carried out by statistically linking the net cutterhead torque, TBM thrust force, instantaneous cutting rate, and field-specific energy with the geotechnical properties of the excavated clayey soil by using single and linear multi-variable regression methods. The results indicate that, while the performance parameters are similar for the silty sand and lean (low plasticity) clay, the cutterhead torque and field-specific energy are higher, and the thrust and instantaneous cutting rate are lower, for high plasticity clays. The vane shear strength and consistency index may be used for predicting the cutterhead torque, fall cone penetration depth for the thrust force, plastic limit for the instantaneous cutting rate, and plastic limit and plasticity index, as well as the consistency index, for field-specific energy predictions. Additional studies are required to provide more reliable and generalized prediction models, by increasing the number of laboratory and field tests for different soil types and performance data for different EPB TBMs.

AB - This study was conducted in order to determine the effects of soil properties on the excavation performance of an earth pressure balance tunnel boring machine (EPB TBM) used in the Istanbul Ayvali Waste Water Tunnel Project in the development of empirical performance prediction models. The tunnel alignment was divided into three general sections in terms of geological and geotechnical conditions. Soil samples were collected from 14 different locations along these sections of approximately 60 segment rings, and subjected to laboratory tests in order to determine the particle size distribution, natural water content, consistency limits (liquid limit, plastic limit, plasticity index, and consistency index), vane shear strength, fall cone penetration depth, unified soil classification, and clogging potential. The field performance data were obtained from the EPB TBM data logger, which operated in open mode without any face pressure being applied. Data analysis was carried out by statistically linking the net cutterhead torque, TBM thrust force, instantaneous cutting rate, and field-specific energy with the geotechnical properties of the excavated clayey soil by using single and linear multi-variable regression methods. The results indicate that, while the performance parameters are similar for the silty sand and lean (low plasticity) clay, the cutterhead torque and field-specific energy are higher, and the thrust and instantaneous cutting rate are lower, for high plasticity clays. The vane shear strength and consistency index may be used for predicting the cutterhead torque, fall cone penetration depth for the thrust force, plastic limit for the instantaneous cutting rate, and plastic limit and plasticity index, as well as the consistency index, for field-specific energy predictions. Additional studies are required to provide more reliable and generalized prediction models, by increasing the number of laboratory and field tests for different soil types and performance data for different EPB TBMs.

KW - EPB TBM

KW - Fine-grained soils

KW - Instantaneous cutting rate

KW - Performance prediction

KW - Specific energy

UR - http://www.scopus.com/inward/record.url?scp=85034114422&partnerID=8YFLogxK

U2 - 10.1016/j.tust.2017.09.016

DO - 10.1016/j.tust.2017.09.016

M3 - Article

AN - SCOPUS:85034114422

SN - 0886-7798

VL - 71

SP - 340

EP - 353

JO - Tunnelling and Underground Space Technology

JF - Tunnelling and Underground Space Technology

ER -

Empirical modeling for predicting excavation performance of EPB TBM based on soil properties

Abstract

Bibliographical note

Funding

Keywords

Access to Document

Other files and links

Fingerprint

Cite this