Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Naim Suleyman Ting; Yusuf Yasa; Ismail Aksoy; Yakup Sahin

doi:10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Naim Suleyman Ting, Yusuf Yasa, Ismail Aksoy, Yakup Sahin

Yildiz Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

18 Citations (Scopus)

Abstract

In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

Original language	English
Title of host publication	Joint International Conference - ACEMP 2015
Subtitle of host publication	Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems
Editors	H. Bulent Ertan
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	69-74
Number of pages	6
ISBN (Electronic)	9781467372398
DOIs	https://doi.org/10.1109/OPTIM.2015.7426976
Publication status	Published - 7 Mar 2016
Externally published	Yes
Event	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 - Side, Turkey Duration: 2 Sept 2015 → 4 Sept 2015

Publication series

Name	Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

Conference

Conference	1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015
Country/Territory	Turkey
City	Side
Period	2/09/15 → 4/09/15

Bibliographical note

Publisher Copyright:
© 2015 IEEE.

Keywords

back to back converter
Field oriented control
hysteresis control
PMSG
space vector pulse width modulation

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/OPTIM.2015.7426976

Cite this

Ting, N. S., Yasa, Y., Aksoy, I., & Sahin, Y. (2016). Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. In H. B. Ertan (Ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems (pp. 69-74). Article 7426976 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/OPTIM.2015.7426976

Ting, Naim Suleyman ; Yasa, Yusuf ; Aksoy, Ismail et al. / Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. editor / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. pp. 69-74 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

@inproceedings{6a53158816894362b742c1763cca8552,

title = "Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems",

abstract = "In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.",

keywords = "back to back converter, Field oriented control, hysteresis control, PMSG, space vector pulse width modulation",

author = "Ting, {Naim Suleyman} and Yusuf Yasa and Ismail Aksoy and Yakup Sahin",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015 ; Conference date: 02-09-2015 Through 04-09-2015",

year = "2016",

month = mar,

day = "7",

doi = "10.1109/OPTIM.2015.7426976",

language = "English",

series = "Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "69--74",

editor = "Ertan, {H. Bulent}",

booktitle = "Joint International Conference - ACEMP 2015",

address = "United States",

}

Ting, NS, Yasa, Y, Aksoy, I & Sahin, Y 2016, Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. in HB Ertan (ed.), Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems., 7426976, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems, Institute of Electrical and Electronics Engineers Inc., pp. 69-74, 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015, Side, Turkey, 2/09/15. https://doi.org/10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. / Ting, Naim Suleyman; Yasa, Yusuf; Aksoy, Ismail et al.
Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. ed. / H. Bulent Ertan. Institute of Electrical and Electronics Engineers Inc., 2016. p. 69-74 7426976 (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

AU - Ting, Naim Suleyman

AU - Yasa, Yusuf

AU - Aksoy, Ismail

AU - Sahin, Yakup

PY - 2016/3/7

Y1 - 2016/3/7

N2 - In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

AB - In this paper, the performance of space vector pulse width modulation (SVPWM), sinusoidal pulse width modulation (SPWM) and hysteresis current control (HCC) control techniques used in power control with back to back converter of permanent magnet synchronous generator used in wind turbines are comparatively analyzed in terms of dynamic response, total harmonic distortion (THD), torque ripple and current ripple. Furthermore, SVPWM and SPWM are compared in terms of the using DC link voltage. Analysis of system is realized with MATLAB/Simulink program. There is not paper that together of these three control techniques are compared in terms of common results or values in literature. Permanent magnet synchronous generator (PMSG) is used in simulations is surface mounted, bipolar and its power is 1.8 kW. However, PMSM's energy transmission to grid is made with Field Oriented Control (FOC). According to analysis results, it has been observed that SVPWM generally has more efficient results than both HCC and SPWM control technique. Also, it is observed that SVPWM can produce about 15 percent higher than SPWM in output voltage.

KW - back to back converter

KW - Field oriented control

KW - hysteresis control

KW - PMSG

KW - space vector pulse width modulation

UR - http://www.scopus.com/inward/record.url?scp=84964937837&partnerID=8YFLogxK

U2 - 10.1109/OPTIM.2015.7426976

DO - 10.1109/OPTIM.2015.7426976

M3 - Conference contribution

AN - SCOPUS:84964937837

T3 - Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems

SP - 69

EP - 74

BT - Joint International Conference - ACEMP 2015

A2 - Ertan, H. Bulent

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 1st Joint International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2015, International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2015 and International Symposium on Advanced Electromechanical Motion Systems, ELECTROMOTION 2015

Y2 - 2 September 2015 through 4 September 2015

ER -

Ting NS, Yasa Y, Aksoy I, Sahin Y. Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems. In Ertan HB, editor, Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems. Institute of Electrical and Electronics Engineers Inc. 2016. p. 69-74. 7426976. (Joint International Conference - ACEMP 2015: Aegean Conference on Electrical Machines and Power Electronics, OPTIM 2015: Optimization of Electrical and Electronic Equipment and ELECTROMOTION 2015: International Symposium on Advanced Electromechanical Motion Systems). doi: 10.1109/OPTIM.2015.7426976

Comparison of SVPWM, SPWM and HCC control techniques in power control of PMSG used in wind turbine systems

Abstract

Publication series

Conference

Bibliographical note

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this