Comparing hysteretic behavior of light-gauge steel plate shear walls and braced frames

Jeffrey W. Berman, Oguz C. Celik*, Michel Bruneau

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

104 Citations (Scopus)

Abstract

Braced frames and steel plate shear walls (SPSWs) have both been shown to be useful in the seismic retrofit of buildings. While both these systems have merit, no guidance exists to help the engineer determine which of the two approaches is preferable in terms of providing stiffness, maximum displacement ductility, cumulative hysteretic energy dissipation, and energy dissipation per cycle for a given strength. In an attempt to provide some quantitative data and insight for this purpose, this paper describes and compares the results from cyclic testing of six frames: four concentrically braced frames (two with cold-formed steel studs for in-plane and out-of-plane restraint of the braces and two without), and two light-gauge steel plate shear walls (one with a flat infill plate and one with a corrugated infill). The largest initial stiffness was provided by a braced frame specimen with cold formed steel studs and the largest ductility was achieved with a steel plate shear wall with flat infill. After scaling the hysteretic results to the same design base shear, it was found that both the energy dissipated per cycle and the cumulative energy dissipation were similar for flat plate SPSW and braced frames with two tubular braces, up to a ductility of four. After that the tubular braces fractured while the SPSW with a flat infill reached a ductility of nine before the energy dissipation per cycle decreased.

Original languageEnglish
Pages (from-to)475-485
Number of pages11
JournalEngineering Structures
Volume27
Issue number3
DOIs
Publication statusPublished - Feb 2005

Funding

This research was supported in part by the Earthquake Engineering Research Centers Program of the National Science Foundation (NSF) under Award Number EEC-9701471 to the Multidisciplinary Center for Earthquake Engineering Research (MCEER). The second author thanks the Istanbul Technical University (ITU) President Office and ITU Faculty of Architecture for their partial support during his stay in Buffalo, under Grant to Support Long Term Research Activities Abroad for Young Researchers. However, any opinions, findings, conclusions, and recommendations presented in this paper are those of the authors and do not necessarily reflect the views of the sponsors.

FundersFunder number
ITU Faculty of Architecture
National Science FoundationEEC-9701471
Istanbul Teknik Üniversitesi

    Keywords

    • Cyclic testing
    • Ductile retrofit
    • Hysteretic energy dissipation
    • Steel braces
    • Steel plate shear walls

    Fingerprint

    Dive into the research topics of 'Comparing hysteretic behavior of light-gauge steel plate shear walls and braced frames'. Together they form a unique fingerprint.

    Cite this