Combined effects of co-existing anions on the removal of arsenic from groundwater by electrocoagulation process: Optimization through response surface methodology

E. SIk, M. Kobya, E. Demirbas*, E. Gengec, M. S. Oncel

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

30 Citations (Scopus)

Abstract

Removal of arsenic from groundwater by an air-fed electrocoagulation (EC) reactor using Fe ball anodes was investigated and operating parameters were optimized. Combined effects of anions such as phosphate (CPO4-P: 1-10 mg/L), silicate (CSiO3-Si: 20-80 mg/L), bicarbonate (CHCO3: 130-670 mg/L), fluoride (CF: 2-10 mg/L), boron (CB: 5-10 mg/L), and nitrate (CNO3-N: 5-35 mg/L) on the removal efficiency of arsenic at the experimental conditions (initial pH of 7.5, applied current of 0.15 A, Fe ball size of 7.5 mm, 5 cm of Fe ball anodes height in the EC reactor, and air-fed rate of 6.0 L/min) in the EC reactor were evaluated with a Box-Behnken design (BBD) of response surface methodology. The model program was provided responses such as effluent arsenic concentration, removal efficiency and operating cost in the EC process. Analysis of variance for all variables confirmed the predicted models by the experimental design within 95% confidence level (R2: 0.92, Adj-R2: 0.83), which ensured a satisfactory adjustment of the quadratic model with the experimental data. Removal efficiency of arsenic reduced with increase in concentrations of CSiO3-Si from 50 to 80 mg/L and CPO4-P from 5.5 to 10 mg/L while its removal efficiency increased with the increase in the operating time. The rest of the anions showed hardly noticeable effects on the removal efficiency. The optimized results for initial arsenic concentration of 200 μg/L provided with removal efficiency of 99.5%, operating cost of 0.037 $/m3, removed arsenic capacity of 9.41 μgAs/mgFe and effluent concentration of 1.10 μg/L at 4.80 mg/L of CPO4-P, 26.50 mg/L of CSiO3-Si, 596 mg/L of CHCO3, 2.60 mg/L of CF, 10 mg/L of CB, 6.80 mg/L of CNO3-N and 6.72 min, respectively.

Original languageEnglish
Pages (from-to)3792-3802
Number of pages11
JournalJournal of Environmental Chemical Engineering
Volume5
Issue number4
DOIs
Publication statusPublished - Aug 2017
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2017 Elsevier Ltd. All rights reserved.

Keywords

  • Annova
  • Arsenic removal
  • Box-Behnken design
  • Effects of anions
  • Electrocoagulation
  • Optimization

Fingerprint

Dive into the research topics of 'Combined effects of co-existing anions on the removal of arsenic from groundwater by electrocoagulation process: Optimization through response surface methodology'. Together they form a unique fingerprint.

Cite this