An archaeometric assessment study of Seljuk period glazed tiles from Kılıçarslan Square (Konya, Turkey)

This study presents archaeometric analyses of glazed tiles produced with the cut-mosaic technique to reveal information about the Anatolian Seljuk period’s architecture and ceramic technology. The Persian Seljuk artists also used the same technique. For this purpose, physical, chemical, thermal, mineralogical, microstructural, and molecular analyses were carried out on the tiles from the Seljuk period unearthed in the Kılıçarslan Square excavation in Konya, the capital of the Anatolian Seljuk State from the twelfth-century to the beginning of the fourteenth-century. SEM, XRD, and Heat Microscopy analyses showed that the Seljuk period tiles were not fired at high temperatures like today’s tiles and were probably fired at temperatures below 1100 °C. WD-XRF analyses revealed that the glazes are classified into two categories, one being alkali varying the content of Na₂O + K₂O between 13 and 16 wt% (PbO between 0.5 and 2 wt%) and the other being lead-alkali type in which PbO content varies between 13 and 15 wt% and alkali content 10–14 wt%. The cobalt content in the blue color is around 0.2 wt%, and copper content in the turquoise-colored samples varies between 2.9 and 4.4 wt% depending on the lightness and darkness of the color (higher amount for tile 1 and tile 3, which are darker than the others). The brown color is obtained by the presence of MnO (3.3 wt%). Raman analysis showed that the difference in sintering temperature caused the color tone difference in Seljuk period tiles, and glazes were formed in the range of 800–1000 °C depending on the I_p values.