Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Cagri Abis; Fatih Unal; Ata Mugan

doi:10.1109/ICMECH.2011.5971288

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Cagri Abis^*
, Fatih Unal
, Ata Mugan

^*Corresponding author for this work

Department of Mechanical Engineering

Istanbul Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

8 Citations (Scopus)

Abstract

In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

Original language	English
Title of host publication	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings
Pages	19-22
Number of pages	4
DOIs	https://doi.org/10.1109/ICMECH.2011.5971288
Publication status	Published - 2011
Event	2011 IEEE International Conference on Mechatronics, ICM 2011 - Istanbul, Turkey Duration: 13 Apr 2011 → 15 Apr 2011

Publication series

Name	2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

Conference

Conference	2011 IEEE International Conference on Mechatronics, ICM 2011
Country/Territory	Turkey
City	Istanbul
Period	13/04/11 → 15/04/11

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Keywords

Active Vibration Control
Lathe
Piezoelectric Stack
Surface Quality
Surface Roughness

Access to Document

10.1109/ICMECH.2011.5971288

Cite this

@inproceedings{35293151aee04169a1e832e1924e4032,

title = "Active vibration control with piezoelectric actuator on a lathe machine with a gain controller",

abstract = "In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.",

keywords = "Active Vibration Control, Lathe, Piezoelectric Stack, Surface Quality, Surface Roughness",

author = "Cagri Abis and Fatih Unal and Ata Mugan",

year = "2011",

doi = "10.1109/ICMECH.2011.5971288",

language = "English",

isbn = "9781612849836",

series = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

pages = "19--22",

booktitle = "2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings",

note = "2011 IEEE International Conference on Mechatronics, ICM 2011 ; Conference date: 13-04-2011 Through 15-04-2011",

}

Abis, C, Unal, F & Mugan, A 2011, Active vibration control with piezoelectric actuator on a lathe machine with a gain controller. in 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings., 5971288, 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings, pp. 19-22, 2011 IEEE International Conference on Mechatronics, ICM 2011, Istanbul, Turkey, 13/04/11. https://doi.org/10.1109/ICMECH.2011.5971288

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller. / Abis, Cagri; Unal, Fatih; Mugan, Ata.
2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings. 2011. p. 19-22 5971288 (2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

AU - Abis, Cagri

AU - Unal, Fatih

AU - Mugan, Ata

PY - 2011

Y1 - 2011

N2 - In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

AB - In this study, an active vibration control on a CNC lathe machine by the use of a stack piezoelectric actuator is accomplished. In the implementation of piezoelectric actuators, dSpace 1104 Control Card is used as the control unit. By using the acceleration feedback signals measured on the cutting tool, the control signal being out-of-phase with the acceleration measurements is applied to the piezo electric actuators. The system is implemented on a Mazak CNC lathe machine. The experimental results show that the implemented active control approach yields reduction on surface roughness of machined parts.

KW - Active Vibration Control

KW - Lathe

KW - Piezoelectric Stack

KW - Surface Quality

KW - Surface Roughness

UR - https://www.scopus.com/pages/publications/80052146244

U2 - 10.1109/ICMECH.2011.5971288

DO - 10.1109/ICMECH.2011.5971288

M3 - Conference contribution

AN - SCOPUS:80052146244

SN - 9781612849836

T3 - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

SP - 19

EP - 22

BT - 2011 IEEE International Conference on Mechatronics, ICM 2011 - Proceedings

T2 - 2011 IEEE International Conference on Mechatronics, ICM 2011

Y2 - 13 April 2011 through 15 April 2011

ER -

Active vibration control with piezoelectric actuator on a lathe machine with a gain controller

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this