TY - JOUR
T1 - A study on thermo-mechanical behavior of AA5754 alloy (tread and plain sheet) produced by twin-roll casting
AU - Demiray, Y.
AU - Kavaklioglu, Z. B.
AU - Yucel, O.
PY - 2015/4/1
Y1 - 2015/4/1
N2 - Aluminum alloy AA5754 is used for many technical and industrial applications. Twin roll casting is unique among the casting processes in that it is a combined "solidification/deformation" technique. The simultaneous solidification and hot rolling produces characteristic microstructure with a fine cell size and intermetallic particle distribution with some residual structure. In the study, first AA5754 alloy (tread and plain sheet) strips were fabricated by using a twin-roll caster equipped with water-cooled steel-rolls. To reduce the thickness of the strip, cold rolling process was applied until strip thickness got 3 mm. After homogenization step the strips were cut in to smaller specimens and annealed at 260 °C, 285 °C, 310 °C, 340 °C, 370 °C, 400 °C, 430 °C, 460 °C, 490 °C, 520 °C for 3 hours to obtain the desired temper conditions. Mechanical properties were investigated after processes. Tensile, hardness and bending tests were applied to monitor the effect of annealing after cold rolling process.
AB - Aluminum alloy AA5754 is used for many technical and industrial applications. Twin roll casting is unique among the casting processes in that it is a combined "solidification/deformation" technique. The simultaneous solidification and hot rolling produces characteristic microstructure with a fine cell size and intermetallic particle distribution with some residual structure. In the study, first AA5754 alloy (tread and plain sheet) strips were fabricated by using a twin-roll caster equipped with water-cooled steel-rolls. To reduce the thickness of the strip, cold rolling process was applied until strip thickness got 3 mm. After homogenization step the strips were cut in to smaller specimens and annealed at 260 °C, 285 °C, 310 °C, 340 °C, 370 °C, 400 °C, 430 °C, 460 °C, 490 °C, 520 °C for 3 hours to obtain the desired temper conditions. Mechanical properties were investigated after processes. Tensile, hardness and bending tests were applied to monitor the effect of annealing after cold rolling process.
UR - http://www.scopus.com/inward/record.url?scp=84938871522&partnerID=8YFLogxK
U2 - 10.12693/APhysPolA.127.1097
DO - 10.12693/APhysPolA.127.1097
M3 - Article
AN - SCOPUS:84938871522
SN - 0587-4246
VL - 127
SP - 1097
EP - 1099
JO - Acta Physica Polonica A
JF - Acta Physica Polonica A
IS - 4
ER -