A simple frequency selective absorber surface design

Bora Döken; Mesut Kartal; Sakir Balta

doi:10.1109/RAST.2019.8767846

A simple frequency selective absorber surface design

Bora Döken, Mesut Kartal, Sakir Balta

Department of Electronics and Communication Engineering

Istanbul Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

The aim of this work is to design a planar frequency selective absorber for 2-7 GHz frequencies. Many military and indoor communication technologies are defined in these frequencies. Absorption frequency behavior is achieved by using lossy periodic conducting geometries over a conducting sheet in the proposed design. A thinner and having a more bandwidth design is achieved comparing with Salisbury absorber. The performance of this absorber is maintained over a wide incidence angles (0-45 degrees) and for both TE and TM polarizations.

Original language	English
Title of host publication	Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019
Editors	S. Menekay, O. Cetin, O. Alparslan
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	79-82
Number of pages	4
ISBN (Electronic)	9781538694480
DOIs	https://doi.org/10.1109/RAST.2019.8767846
Publication status	Published - Jun 2019
Event	9th International Conference on Recent Advances in Space Technologies, RAST 2019 - Istanbul, Turkey Duration: 11 Jun 2019 → 14 Jun 2019

Publication series

Name	Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019

Conference

Conference	9th International Conference on Recent Advances in Space Technologies, RAST 2019
Country/Territory	Turkey
City	Istanbul
Period	11/06/19 → 14/06/19

Bibliographical note

Publisher Copyright:
© 2019 IEEE.

Keywords

FSS
Frequency selective surface
absorber
periodic structures

Access to Document

10.1109/RAST.2019.8767846

Cite this

Döken, B., Kartal, M., & Balta, S. (2019). A simple frequency selective absorber surface design. In S. Menekay, O. Cetin, & O. Alparslan (Eds.), Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019 (pp. 79-82). Article 8767846 (Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/RAST.2019.8767846

Döken, Bora ; Kartal, Mesut ; Balta, Sakir. / A simple frequency selective absorber surface design. Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019. editor / S. Menekay ; O. Cetin ; O. Alparslan. Institute of Electrical and Electronics Engineers Inc., 2019. pp. 79-82 (Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019).

@inproceedings{005b3e8b4daf45cfbb13c4716dab34ff,

title = "A simple frequency selective absorber surface design",

abstract = "The aim of this work is to design a planar frequency selective absorber for 2-7 GHz frequencies. Many military and indoor communication technologies are defined in these frequencies. Absorption frequency behavior is achieved by using lossy periodic conducting geometries over a conducting sheet in the proposed design. A thinner and having a more bandwidth design is achieved comparing with Salisbury absorber. The performance of this absorber is maintained over a wide incidence angles (0-45 degrees) and for both TE and TM polarizations.",

keywords = "FSS, Frequency selective surface, absorber, periodic structures",

author = "Bora D{\"o}ken and Mesut Kartal and Sakir Balta",

note = "Publisher Copyright: {\textcopyright} 2019 IEEE.; 9th International Conference on Recent Advances in Space Technologies, RAST 2019 ; Conference date: 11-06-2019 Through 14-06-2019",

year = "2019",

month = jun,

doi = "10.1109/RAST.2019.8767846",

language = "English",

series = "Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "79--82",

editor = "S. Menekay and O. Cetin and O. Alparslan",

booktitle = "Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019",

address = "United States",

}

Döken, B , Kartal, M & Balta, S 2019, A simple frequency selective absorber surface design. in S Menekay, O Cetin & O Alparslan (eds), Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019., 8767846, Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019, Institute of Electrical and Electronics Engineers Inc., pp. 79-82, 9th International Conference on Recent Advances in Space Technologies, RAST 2019, Istanbul, Turkey, 11/06/19. https://doi.org/10.1109/RAST.2019.8767846

A simple frequency selective absorber surface design. / Döken, Bora ; Kartal, Mesut; Balta, Sakir.
Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019. ed. / S. Menekay; O. Cetin; O. Alparslan. Institute of Electrical and Electronics Engineers Inc., 2019. p. 79-82 8767846 (Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A simple frequency selective absorber surface design

AU - Döken, Bora

AU - Kartal, Mesut

AU - Balta, Sakir

PY - 2019/6

Y1 - 2019/6

N2 - The aim of this work is to design a planar frequency selective absorber for 2-7 GHz frequencies. Many military and indoor communication technologies are defined in these frequencies. Absorption frequency behavior is achieved by using lossy periodic conducting geometries over a conducting sheet in the proposed design. A thinner and having a more bandwidth design is achieved comparing with Salisbury absorber. The performance of this absorber is maintained over a wide incidence angles (0-45 degrees) and for both TE and TM polarizations.

AB - The aim of this work is to design a planar frequency selective absorber for 2-7 GHz frequencies. Many military and indoor communication technologies are defined in these frequencies. Absorption frequency behavior is achieved by using lossy periodic conducting geometries over a conducting sheet in the proposed design. A thinner and having a more bandwidth design is achieved comparing with Salisbury absorber. The performance of this absorber is maintained over a wide incidence angles (0-45 degrees) and for both TE and TM polarizations.

KW - FSS

KW - Frequency selective surface

KW - absorber

KW - periodic structures

UR - https://www.scopus.com/pages/publications/85073896606

U2 - 10.1109/RAST.2019.8767846

DO - 10.1109/RAST.2019.8767846

M3 - Conference contribution

AN - SCOPUS:85073896606

T3 - Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019

SP - 79

EP - 82

BT - Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019

A2 - Menekay, S.

A2 - Cetin, O.

A2 - Alparslan, O.

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 9th International Conference on Recent Advances in Space Technologies, RAST 2019

Y2 - 11 June 2019 through 14 June 2019

ER -

Döken B , Kartal M, Balta S. A simple frequency selective absorber surface design. In Menekay S, Cetin O, Alparslan O, editors, Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019. Institute of Electrical and Electronics Engineers Inc. 2019. p. 79-82. 8767846. (Proceedings of 9th International Conference on Recent Advances in Space Technologies, RAST 2019). doi: 10.1109/RAST.2019.8767846

A simple frequency selective absorber surface design

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this