A novel three-phase transformer hysteresis model in MATLAB™ simulink

Okan Özgönenel; Kamil Rifat Irfan Güney; Ömer Usta; Hasan Dirik

doi:10.3906/elk-1011-928

A novel three-phase transformer hysteresis model in MATLAB™ simulink

Okan Özgönenel^*, Kamil Rifat Irfan Güney, Ömer Usta, Hasan Dirik

^*Corresponding author for this work

Department of Electrical Engineering

Research output: Contribution to journal › Article › peer-review

2 Citations (Scopus)

Abstract

This paper presents a new transformer model displaying hysteresis using the MATLAB™ Simulink environment. The proposed model displays a complete scheme for the simulation of 3-phase transformers. The new model is mainly based on the transmission line model and the Jiles-Atherton model of a power system using lumped parameters. Jiles-Atherton model parameters were determined by curve fitting and numerical optimization iteration. The developedmodel is particularly suitable for fault analysis and protective relaying studies under harmonic conditions where the transformer is driven into the nonlinear regime. The performance of the method was evaluated by both theorical and experimental data.

Original language	English
Pages (from-to)	479-492
Number of pages	14
Journal	Turkish Journal of Electrical Engineering and Computer Sciences
Volume	20
Issue number	4
DOIs	https://doi.org/10.3906/elk-1011-928
Publication status	Published - 2012

Keywords

Hysteresis
Jiles-Atherton
Transformer modeling

Access to Document

10.3906/elk-1011-928

Cite this

@article{1a744851a7be4d24a27841c10b175966,

title = "A novel three-phase transformer hysteresis model in MATLAB{\texttrademark} simulink",

abstract = "This paper presents a new transformer model displaying hysteresis using the MATLAB{\texttrademark} Simulink environment. The proposed model displays a complete scheme for the simulation of 3-phase transformers. The new model is mainly based on the transmission line model and the Jiles-Atherton model of a power system using lumped parameters. Jiles-Atherton model parameters were determined by curve fitting and numerical optimization iteration. The developedmodel is particularly suitable for fault analysis and protective relaying studies under harmonic conditions where the transformer is driven into the nonlinear regime. The performance of the method was evaluated by both theorical and experimental data.",

keywords = "Hysteresis, Jiles-Atherton, Transformer modeling",

author = "Okan {\"O}zg{\"o}nenel and G{\"u}ney, {Kamil Rifat Irfan} and {\"O}mer Usta and Hasan Dirik",

year = "2012",

doi = "10.3906/elk-1011-928",

language = "English",

volume = "20",

pages = "479--492",

journal = "Turkish Journal of Electrical Engineering and Computer Sciences",

issn = "1300-0632",

publisher = "TUBITAK",

number = "4",

}

TY - JOUR

T1 - A novel three-phase transformer hysteresis model in MATLAB™ simulink

AU - Özgönenel, Okan

AU - Güney, Kamil Rifat Irfan

AU - Usta, Ömer

AU - Dirik, Hasan

PY - 2012

Y1 - 2012

N2 - This paper presents a new transformer model displaying hysteresis using the MATLAB™ Simulink environment. The proposed model displays a complete scheme for the simulation of 3-phase transformers. The new model is mainly based on the transmission line model and the Jiles-Atherton model of a power system using lumped parameters. Jiles-Atherton model parameters were determined by curve fitting and numerical optimization iteration. The developedmodel is particularly suitable for fault analysis and protective relaying studies under harmonic conditions where the transformer is driven into the nonlinear regime. The performance of the method was evaluated by both theorical and experimental data.

AB - This paper presents a new transformer model displaying hysteresis using the MATLAB™ Simulink environment. The proposed model displays a complete scheme for the simulation of 3-phase transformers. The new model is mainly based on the transmission line model and the Jiles-Atherton model of a power system using lumped parameters. Jiles-Atherton model parameters were determined by curve fitting and numerical optimization iteration. The developedmodel is particularly suitable for fault analysis and protective relaying studies under harmonic conditions where the transformer is driven into the nonlinear regime. The performance of the method was evaluated by both theorical and experimental data.

KW - Hysteresis

KW - Jiles-Atherton

KW - Transformer modeling

UR - http://www.scopus.com/inward/record.url?scp=84859510132&partnerID=8YFLogxK

U2 - 10.3906/elk-1011-928

DO - 10.3906/elk-1011-928

M3 - Article

AN - SCOPUS:84859510132

SN - 1300-0632

VL - 20

SP - 479

EP - 492

JO - Turkish Journal of Electrical Engineering and Computer Sciences

JF - Turkish Journal of Electrical Engineering and Computer Sciences

IS - 4

ER -

A novel three-phase transformer hysteresis model in MATLAB™ simulink

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this